diedb / homey-solarpanels Goto Github PK

GoodWe changed to SEMS portal to provide output. I can't find the right code to connect my panels.

There seems to be no communication possible with the SolarEdge device. I cannot see the setup like API either. Diagnostics: 744d0d8e-025a-4122-a906-62e030c4de8c

I have linked my Enphase system to homey. The connection is working en it is reporting values. The Energiemeter value seems to be correct. But the reported Energie value is not.
I have checked the enphase api. It seems the summary api you use is not reporting correct values for current_power.
This is not only on my system. Also other system have the same problem.
See:
https://developer.enphase.com/forum/topics/summary-current_power-reliable

As replacement for the summery api you could use the stats api. This seems to reporting correct values.
This is reporting the power in intervals of 5 minutes.
Without any filtering it is reporting all intervals for the current day (adding a filter can make the result smaller and faster to process).
You can then take the last interval.
If the last interval is too old (system is not reporting intervals when system is not generating power) then 0 can be used for the energie value.
This also solves the problem that current_power never gets to 0 in the summery api.

Sample of a stats call:
https://api.enphaseenergy.com/api/v2/systems/1234567/stats?key=&user_id=&datetime_format=iso8601

Sample output (most intervals removed):

{
system_id: 1234567,
total_devices: 8,
intervals: [
{
end_at: "2019-02-04T08:00:00+01:00",
devices_reporting: 2,
powr: 0,
enwh: 0
},
{
end_at: "2019-02-04T08:05:00+01:00",
devices_reporting: 8,
powr: 2,
enwh: 0
},
.
.
.
{
end_at: "2019-02-04T17:00:00+01:00",
devices_reporting: 8,
powr: 37,
enwh: 3
},
{
end_at: "2019-02-04T17:05:00+01:00",
devices_reporting: 8,
powr: 33,
enwh: 3
}
],
meta: {
status: "normal",
last_report_at: "2019-02-04T17:52:52+01:00",
last_energy_at: "2019-02-04T17:05:41+01:00",
operational_at: "2019-01-31T13:18:16+01:00"
}
}

Solaredge was working perfectly but since update 3.0.0 it doesn't do anything anymore. sometime's it works shortly but give's info from 2 day's ago. After removing the app and install it again i am unable to connect again, after filling in the system ID and Api i get an Error: Could not find that PairSession.....

After the auto upgrade to 3.0 the SolarEdge gives error and when I looked in settings the API key was gone. After adding the key it worked after waiting 30 minutes. Looks like API key gets purged on upgrade?

I have used Solar Panels app with Fronius and was very happy with it.
Now when using v2.0 i can't use the 1.4.3 app that supports fronius.
Can you add Fronius support in beta app?

When trying to connect, I keep getting "inloggegevens incorrect".

I have copied the API key from zevercloud.com on plant configuration.

Am I doing something wrong? I can use some help.

It stop working after upgrade and i have to add the solaredge converter againt.

Now i cant create flow beacuse the converter wont show up in when card section.

After update 3.0.0

Martin

What is your Homey version (Settings → System)?
0.8.34 / App v1.2.0

What did you try to achieve?
App ran approx. 18 days (with a lot of restarts for Homey .32 / KAKU etc.) without problems monitoring my SolarEdge.
Today the Settings / Apps showed an exclamation mark "This app has crashed" (ChromeCast also)
Graphs updating stopped yesterday.

Please include detailed steps how we can reproduce the issue
Don't know yet if I can reproduce!

What was the result?
Graphs updating stopped yesterday.

What did you expect as result?
No Crash ;-)

Any other remarks
Disabled and re-enabled the App 2 times, Solar Panels works some time but crashes again.
Don't know if .34 is unstable or the App, or the missing restarts of Homey ;-)

No idea what to fill in. Tried all. But constant message plant ID incorrect.

Homey v1.2 RC8
SAJ not showing energy and power readings anymore ?

Had to remove them and set them up again.

Readings from Solarman keeps on working fine

I have just downloaded your app and am unable to achieve login to Enphase. Could you please provide some detailed documentation as to how you set this app up?

I did remove my omnik solar system from Homey and wanted it to RE-pair it again. Because the energy was not updating
I’m not able to do pair it anymore. It is creating a timeout.
It did work before.
I’m using 2.5.0 betha version of the app and 2.1.0 Homey version
I also tried version 2.4.0 again. This gives also a time-out at pairing

Beste Diederik,

Ik probeer mijn envoy-S meterd met homey te verbinden. Ik heb een developer account aangemaakt en deze toegang gegeven tot mijn enlighten. Hierna heb ik op homey een appartaat toegevoegd en de app geselecteerd, hier het nummer van de envoy-s (12182805xxxx), mijn API key en mijn enlighten ID ingevuld. Nadat ik op connect had gedrukt kreeg ik een pop-up met de te tekst “error: er is een onbekende fout opgetreden [unknown_error]”

Ik hoop dat je mij hierme kan helpen om toch verbinding te krijgen en jou app je kunnen gebruiken.

Ik gebruik overgens de Beta versie van de app, gezien enkel deze nog geinstalleerd kan worden.

I've connected my Homey to my solarpanels, using the login credentials from the ginglong monitoring website. The credentials are accepted, I copied the plant-ID from what was shown in the browser bar after logging in. So far everything seems fine. But..... I can't see any energy production being recorded.
When viewing through the dedicated ginglong-app on my phone I can see the energy production.
Why is the Homey plugin not recording data?

Homey 1.2.0 RC9
Solar inverters from SAJ both no readings recorded anymore. So again an issue probably after a reboot or system disconnect from homey. The green reading is from Solarman inverter.

I installed the BETA version but I see SAJ is not supported there anymore why ?

Hi Diederik,
Did you also notice this:
https://github.com/athombv/homey/issues/1051
I guess Nothing you can do about.... imho a Homey Core issue as introduced after a Homey Firmware upgrade i think.
Just to let you know.

Hi,
I got the 3.0.0 update automaticly and got the red mark on the device.
Open configuration and added IP-address. Still no function.
Removed the device, restarted Homey and added a Fronius device from beginning.
When it was done the app chrashed, (same as latetst Beta), and when I went into the device I got:
Device is unavailable. Error retrieving data ( ReferenceError: currentPower is not defined)
//Per

Hi
I had this working for many months but then it stopped for approx one month ago.

I deleted the app and installed it again. IP adress to converter is fixed. Added a device of type Fronius, 192.168.0.67 (used in router and converter is reporting to the cloud) and the name Fronius.
Try to connect and after a time I get the error message "homey offline"

Ik heb SolarPanels (v1.4.3 - 12.06.17) geïnstalleerd en heb geprobeerd een SolarMAN apparaat toe te voegen. Nadat ik de gevraagde gegevens (username, password, site ID en inverter naam) had ingevuld en op 'Connect' klikte kreeg ik de foutmelding 'Plant ID onjuist'.
De ingevulde gegevens zijn correct en ik kan mijn SolarMAN account via de SolarMAN website zonder problemen benaderen.
Ik heb ook de beta-versie (v2.2.1 - 25.03.18) geprobeerd. Bij deze versie verschijnt na het invullen van de gegevens en het klikken op 'Connect' een wachtsymbool (draaiend tandwiel) en een button 'Volgende'.
Het wachtsymbool verdwijnt niet vanzelf, en als ik op 'Volgende' klik sluit het venster maar is er geen apparaat toegevoegd.
Wat kan hiervan de oorzaak zijn?

Hello Diederik

I have a Enphase solar system, i 've connected it to your app in Homey.
You asked for people who could test is.
I can test something for you if nesacerry.

Het mag ook in het nederlands ;)

Martin Udo

Hi,
When I want to login I receive the message that my plant ID is incorrect.
I have tried to fill in in this field:
My site name
datalogger S/N
inverter S/N

Where can I find my plant ID on the omnik portal? Or is this the same as "My site name"

Regards,
Anthony

I'm trying to connect my SAJ converter but keep getting the message "Incorrect IP address". Is there a known issue?

Hi, I have two inverters on my system (one converting the solar to the mains and the other converting for battery storage). When I install SolarMAN and I log in with site ID I see both inverters and I select them both and they are then both visible in Homey (running Homey V2 and SolarPanels beta v2.4.0). However, only one inverter updates in Homey. If I then delete the one that does not update and reinstall it then that one updates but the other now stops! It appears that the app can only read one inverter.

I have installed the latest version of solar panels but trannergy seems to be disappeared. Will it be back in a later version?

I've updated my homey to v2.0 and running the solar panels beta app(v2.4.0) but pvoutput is syncing for a few minutes and stops randomly.

I lost connection to the Goodwe portal and tried to reconnect.
If i select Goodwe in the add device panel and start typing my username the app scrolls down and shows a black box. After this event the connect button is not functioning anymore.

Some info:
Platform: Apple iPhone 7 iOS 12.1.3
Homey: 2.0.0
Zonnepanelen: 2.4.0 (beta)

The app is timing out again at Omnik
It did work for an hour before .
A pitty it looks like the acces code will be changed once a time or so?

Edit: it is working again?
On my iPad it is working?
It was broken on my Android ?

• Since a few days, (around June 1) the app reports 302 for my Goodwe inverters. Hopefully it can be fixed?
• After updating to the beta version (2.2.x) it seems that Goodwe support has disappeared, is that correct? Will it stay that way...?

I’m using this app for my Omnik converter and is working fine.
Is it possible to ADD cards to the then part of a flow to register the daily generated energie, for example?
Thank you

In my homey, my solar panels are broken. cause:

error retrieving data (FetchError: invalid json response body at https://www.zevercloud......... reason: Unexpected token < in JSON at position1)

Hi DiedB,

1st of all thank you for making this app and i'm very pleased that you added the Zeversolar.
My question is if you could add the following plz:

• Power ...kWH (allrdy in your app) beta
• E-Today ... kWh (allrdy in your app) beta
• E-Total ... kWh
• E-Month ... kWh
• Totalyield ...kWh

The API should look like this:
{"sid":11114,"ludt":"2018-05-18 15:02:23",
"E-Today":{"unit":"kWh","value":13.3},
"E-Month":{"unit":"kWh","value":344.38},
"E-Total":{"unit":"kWh","value":914.64},
"TotalYield":{"unit":"€","value":182.93},
"CO2Avoided":{"unit":"kg","value":731.71},
"Power":{"unit":"kW","value":2.52}}

Thank you,
With kind regards,
Dave

Hello,

I'm using the latest beta version of the app & when I try to enter the login info (including site ID) for a Ginlong site using solarman I get:

Error: unhandled event (You've been logged out or have no authorisation to use the service)

My username & password are correct.

Ihave no connection now in my homey 1.5.13-rc 14
I have right ip
any idea

Hi Diederik, did you remove the SAJ support? can't add it anymore ?

Hi
Confused as to how to connect.
I enter Fronius Id then password and doesn’t connect
Am I connecting correct numbers
Thanks

Hello,

I just noticed my SolarEdge API connection is not working anymore.
Doublechecked the system id and api

Deleted the device and recreated it with the right settings, al stays on 0 0
Running on 1.0.1

Ik ben in het bezit van Simply Solar zonnepanelen.
Daarbij heb ik een Efergy ego unit die de terug geleverde stroom registreert via WifI in een app IOS en Android.

Mijn zonnepanelen zijn van Simply -Solar met een micro converter van AP Systems Type YC500

Is het mogelijk om deze in jouw app te implementeren?

Alvast vrindelijke dank
en met vriendelijke groet Rene van Hugten

Ik krijg binnenkort een zonnepanelenset met een Growatt omvormer (met wifi).
Zijn er plannen en mogelijkheden om deze omvormer toe te voegen aan SolarPanels.

Groet,

Bob

Ha. I am trying to use the app to monitor my enphase solar panels. But I am not able to get it working. From my account with Enphase I cannot distinguish the System ID, User ID and API Key?

I have a Homey and a Solax inverter ZDNY-TLX3 and would like to use it through Homey. Do you have any plans for the Solax?

Groet
Tijn

Hi,

Could you please update the app so that it is working on Homey V2? I do not get any data visible. (Solaredge) using beta app.

Thanks.

When I do a homey reset the connection with my trannergy is lost. I need to add my login and id again. Is this normal behavior or am I doing something wrong

A feature to consider and which would be very appreciated is monitoring of overall consumption from the grid.

This feature is available in e.g. Solaredge.

It will create possibilities to turn off peak loads etc

Hi Diderik,

I have added and configured my SolarEdge PV system in my Homey with your app. Test with this configuration works fine.
Now I will create a workflow to activate a power consuming device if the power is higher than a specified level.
I use the "Logica" app to specify the power level. Similar to your example (I think).
But I get an unexpected error message when I test my flow.
In your example, I see the Power label; I can't select this Power label.
My test flow:

Detail of the flow:

Error message:

I'm not a technician, but can you help me? Is it possible for you to give me some hints or give me more detail examples?

Thank you in advance.

I cannot get my system online in the app.

System ID: Is this the last numerical part of the auth url?
API: I filled out the API key of my app in the developer area of enlighten.
User ID: Is this the user ID of the developer site?
Name: I chose a random name.

Hi

Did you remove the support for SolarMan? I had not had a single problem since Homey had updated to V2.3. Is it possible to add back? If not do you know how I can revert to the earlier release?

I can connect to http://www.solarmanpv.com/portal/LoginPage.aspx portal

I don't get the correct data anymore so I tried to reconnect my Solarman again.

When I use the beta app I fill in the username / password and PID but I get after a view minutes the error homey offline and nothing happens.

So I can not re-add my Solarman it happened somewere end of July / begin of August