This project collects data from a Polar H10 device and a of buttons. It's controllable via an interface.
# sudo ./install.sh
# sudo reboot
- After rebooting, the RPi will start a Wi-Fi network with the prefix
RPI_BDC_
. Thewifi_to_pass.py
script can be used to get the password for the network. This is not secure, but it wasn't intended to be. This can always be adjusted. - To begin data collection, connect to the Wi-Fi network and navigate to
http://10.42.0.1
. - To adjust/add buttons, edit
buttons.py
located in/opt/bike_data_collection/
on the RPi, or simply edit the file locally and re-install.