danielweidman / suleis Goto Github PK

Steps to reproduce:
Set a light strip to purple solid color

Expected behavior:
Lights turn purple, color picker is purple on page reload

Actual behavior:
Lights turn blue, color picker is purple, then turns blue on page reload

BUG (still present)

Actual behavior:

Adding a section from 1 to 100 on a strip produces two sections, one from 1 to 99 and one from 100 to 100.

Expected behavior:

A section from 1 to 100

Similar issues occur with ranges near LED 1

This error encountered when setting the DynamicPattern for first time. Probably a variable scope error.

Expected behavior:
When mode is changed to "Dynamic Pattern," whichever pattern is initially selected in the dropdown that appears should be set immediately.

Actual behavior:
No mode changes are made until the user changes the new dropdown manually

The Arduino code only supports up to 6 sections, but no warning is given if this limit is exceeded in the webpage interface.

Steps to reproduce:
Add a section from 1 to 100
Add a section from 25 to 75
Set color of section from 1 to 24 to blue

Expected behavior:
Because the section from 1 to 100 was split when the section in the middle of it was created, the section from 1 to 24 and the section from 76 to 100 should now act independently.

Actual behavior:
The sections are still linked by same pattern object. Setting the 1-24 to blue also changes the 76-100 to blue.

suggest detecting when the user is logged in

Steps to reproduce:
Visit dashboard
Set a section to SunPattern
Refresh page

Expected Behavior:
Section dropdown will have SunPattern selected

Actual Behavior:
Section dropdown shows Dynamic Pattern selected

Steps to reproduce:
Cause an error in adding a strip (ex: add a strip that is already on another account)

Expected behavior:
Alert message pops up

Actual behavior:
User is taken to page that is blank except for error message

Steps to reproduce:
Set a section to have a DynamicPattern
Set the section to have a SolidPattern

Expected behavior:
DynamicPattern type selector will disappear after SolidPattern chosen, and color picker will appear.

Actual behavior:
DynamicPattern type selector disappears after SolidPattern chosen, but color picker does not appear.

When a DynamicPattern is in use for a section, that section's color picker should go away. Right now it is still present. Furthermore, selecting a color on this color picker produces an error.

Same as issue #4 except for adding sections outside of appropriate range.

Steps to reproduce:

1. Add a section from 1 to 100
2. Add a section from 1 to 50
3. Add a section from 51 to 65

Behavior:
After some time, the HTTP requests sent by the ESP8266 stop properly working. Error code -1 is returned and the lights do not update their status.

Expected behavior:
HTTP requests will continue to be sent and have their payloads received. The lights will continue to update as long as the server is running.