This library allows an Arduino board with USB capabilites to act as a MIDI instrument over USB. The library is based on PluggableUSB, so is only compatible with IDE 1.6.6 and nightly builds (AVR core > 1.6.8, SAM core > 1.6.4, SAMD core > 1.6.1)

Furthermore, since PluggableUSB only targets boards with native USB capabilities, this library only supports these boards (eg. Leonardo, Micro, Due, Zero and so on)

For more information about this library please visit us at http://www.arduino.cc/en/Reference/MIDIUSB

Load the correct driver (sudo modprobe snd_seq_midi)

Flash the board with MIDIUSB_loop example, then execute aseqdump -l; the output will be something similar to

Port 20 is the one we’ll use in the following examples.

Start fluidsynth inside a shell with a soundbank

In another shell, execute

to connect our MIDI device with fluidsynth

Then, execute

and the file will be played after a complete roundtrip to the board.

Copyright (c) 2015, Arduino LLC. All right reserved. Copyright (c) 2015, Gary Grewal

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA