danielrearden / graphql-scalars Goto Github PK

A library of custom GraphQL scalar types for creating precise type-safe GraphQL schemas.

npm install --save graphql-scalars

or

yarn add graphql-scalars

To use these scalars you'll need to add them in two places, your schema and your resolvers map.

NOTE: The new RegularExpression scalar will be used a little differently and is explained below.

In your schema:

scalar Date

scalar Time

scalar DateTime

scalar UtcOffset

scalar EmailAddress

scalar NegativeFloat

scalar NegativeInt

scalar NonNegativeFloat

scalar NonNegativeInt

scalar NonPositiveFloat

scalar NonPositiveInt

scalar PhoneNumber

scalar PositiveFloat

scalar PositiveInt

scalar PostalCode

scalar UnsignedFloat

scalar UnsignedInt

scalar URL

scalar ObjectID

scalar BigInt

scalar Long

scalar GUID

scalar HexColorCode

scalar HSL

scalar HSLA

scalar IPv4

scalar IPv6

scalar ISBN

scalar MAC

scalar Port

scalar RGB

scalar RGBA

scalar USCurrency

scalar Currency

scalar JSON

scalar JSONObject

scalar Byte

In your resolver map, first import them:

import {
  DateResolver,
  TimeResolver,
  DateTimeResolver,
  UtcOffsetResolver,
  EmailAddressResolver,
  NegativeFloatResolver,
  NegativeIntResolver,
  NonNegativeFloatResolver,
  NonNegativeIntResolver,
  NonPositiveFloatResolver,
  NonPositiveIntResolver,
  PhoneNumberResolver,
  PositiveFloatResolver,
  PositiveIntResolver,
  PostalCodeResolver,
  UnsignedFloatResolver,
  UnsignedIntResolver,
  URLResolver,
  BigIntResolver,
  LongResolver,
  GUIDResolver,
  HexColorCodeResolver,
  HSLResolver,
  HSLAResolver,
  IPv4Resolver,
  IPv6Resolver,
  ISBNResolver,
  MACResolver,
  PortResolver,
  RGBResolver,
  RGBAResolver,
  USCurrencyResolver,
  CurrencyResolver,
  JSONResolver,
  JSONObjectResolver,
  ObjectIDResolver,
  ByteResolver,
} from 'graphql-scalars';

Then make sure they're in the root resolver map like this:

const myResolverMap = {
  ObjectID: ObjectIDResolver,

  Date: DateResolver,
  Time: TimeResolver,
  DateTime: DateTimeResolver,
  UtcOffset: UtcOffsetResolver,

  NonPositiveInt: NonPositiveIntResolver,
  PositiveInt: PositiveIntResolver,
  NonNegativeInt: NonNegativeIntResolver,
  NegativeInt: NegativeIntResolver,
  NonPositiveFloat: NonPositiveFloatResolver,
  PositiveFloat: PositiveFloatResolver,
  NonNegativeFloat: NonNegativeFloatResolver,
  NegativeFloat: NegativeFloatResolver,
  UnsignedFloat: UnsignedFloatResolver,
  UnsignedInt: UnsignedIntResolver,
  BigInt: BigIntResolver,
  Long: LongResolver,

  EmailAddress: EmailAddressResolver,
  URL: URLResolver,
  PhoneNumber: PhoneNumberResolver,
  PostalCode: PostalCodeResolver,

  GUID: GUIDResolver,

  HexColorCode: HexColorCodeResolver,
  HSL: HSLResolver,
  HSLA: HSLAResolver,
  RGB: RGBResolver,
  RGBA: RGBAResolver,

  IPv4: IPv4Resolver,
  IPv6: IPv6Resolver,
  MAC: MACResolver,
  Port: PortResolver,

  ISBN: ISBNResolver,

  USCurrency: USCurrencyResolver,
  Currency: CurrencyResolver,
  JSON: JSONResolver,
  JSONObject: JSONObjectResolver,
  Byte: ByteResolver,

  Query: {
    // more stuff here
  },

  Mutation: {
    // more stuff here
  },
};

NOTE: NonNegativeFloat and NonNegativeInt are also available under the aliases UnsignedFloat and UnsignedInt, respectively.

Alternatively, use the default import and ES6's spread operator syntax:

import { resolvers } from 'graphql-scalars';

Then make sure they're in the root resolver map like this:

const myResolverMap = {
  ...resolvers,

  Query: {
    // more stuff here
  },

  Mutation: {
    // more stuff here
  },
};

That's it. Now you can use these scalar types in your schema definition like this:

type Person {
  birthDate: DateTime
  ageInYears: PositiveInt

  heightInInches: PositiveFloat

  minimumHourlyRate: NonNegativeFloat

  currentlyActiveProjects: NonNegativeInt

  email: EmailAddress
  homePage: URL

  phoneNumber: PhoneNumber
  homePostalCode: PostalCode
}

These scalars can be used just like the base, built-in ones.

import { ApolloServer } from 'apollo-server';
import { makeExecutableSchema } from '@graphql-tools/schema';
// import all scalars and resolvers
import { typeDefs, resolvers } from 'graphql-scalars';
// Alternatively, import individual scalars and resolvers
// import { DateTimeResolver, DateTimeTypeDefinition, ... } from "graphql-scalars"

const server = new ApolloServer({
  schema: makeExecutableSchema({
    typeDefs: [
      // use spread syntax to add scalar definitions to your schema
      ...typeDefs,
      // DateTimeTypeDefinition,
      // ...
      // ... other type definitions ...
    ],
    resolvers: {
      // use spread syntax to add scalar resolvers to your resolver map
      ...resolvers,
      // DateTimeResolver,
      // ...
      // ... remainder of resolver map ...
    },
  }),
});

server.listen().then(({ url }) => {
  console.log(`🚀 Server ready at ${url}`);
});

import { ApolloServer } from 'apollo-server';
import { makeExecutableSchema } from '@graphql-tools/schema';
// import all scalars and resolvers
import { typeDefs, resolvers, mocks } from 'graphql-scalars';
// Alternatively, import individual scalars and resolvers
// import { DateTimeResolver, DateTimeTypeDefinition, DateTimeMock, ... } from "graphql-scalars"

const server = new ApolloServer({
  typeDefs: [
    // use spread syntax to add scalar definitions to your schema
    ...typeDefs,
    // DateTimeTypeDefinition,
    // ...
    // ... other type definitions ...
  ],
  resolvers: {
    // use spread syntax to add scalar resolvers to your resolver map
    ...resolvers,
    // DateTimeResolver,
    // ...
    // ... remainder of resolver map ...
  },
  mocks: {
    // use spread syntax to add scalar resolvers to your resolver map
    ...mocks,
    // DateTimeMock,
    // ...
    // ... other mocks ...
  },
});

const { ApolloServer } = require('apollo-server-express');
// Import individual scalars and resolvers
const { DateTimeResolver, DateTimeTypeDefinition } = require('graphql-scalars');

const server = new ApolloServer({
  typeDefs: [DateTimeTypeDefinition, ...yourTypeDefs],
  resolvers: [
    { DateTime: DateTimeResolver }, // <-- Notable difference here
    ...yourResolvers,
  ],
});

server.listen().then(({ url }) => {
  console.log(`🚀 Server ready at ${url}`);
});

First an explanation: To create a new scalar type to the GraphQL schema language, you must create an instance of a new GraphQLScalarType object that implements three general functions/methods: serialize, parseValue and parseLiteral which are used at different stages of processing your GraphQL types during queries and mutations. So creating a new scalar looks like this:

const MyScalar = new GraphQLScalarType({
    'MyScalar',

    description: 'A description of my scalar',

    serialize(value) {
      // ...
      return value;
    },

    parseValue(value) {
      // ...
      return value;
    },

    parseLiteral(ast) {
      // ...
      return ast.value;
    }
  });

Given this, if we want to create a new type that is essentially the same except for one little customizable aspect (e.g., a regular expression type that has all the same code except the regex is different) then we need to dynamically generate a new GraphQLScalarType object given some parameters. That's the approach we take here.

Therefore the RegularExpression scalar type is really a GraphQLScalarType object generator that takes two arguments:

• a name
• the regex you want it to use

So to create a new scalar for a given regex, you will do this:

const MyRegexType = new RegularExpression('MyRegexType', /^ABC$/);

Now MyRegexType is your new GraphQL scalar type that will enforce a value of, in this case, "ABC".

Add your new scalar type to your resolver map:

export default {
  MyRegexType,
};

And to your schema:

scalar MyRegexType

That's it. Now you can use MyRegexType as a type in the rest of your schema.

There is an optional third options argument to the RegularExpression constructor that can be used like this:

const options = {
  errorMessage: (regex, value) => {
    if (process.env.NODE_ENV === 'production')
      return `Value is invalid format: ${value} `;
    else
      return `Value does not match the regular expression ${regex}: ${value}`;
  },
};

const MyRegexType = new RegularExpression('MyRegexType', /^ABC$/, options);

The primary purposes these scalars, really of all types are to:

1. Communicate to users of your schema exactly what they can expect or to at least reduce ambiguity in cases where that's possible. For example if you have a Person type in your schema and that type has as field like ageInYears, the value of that can only be null or a positive integer (or float, depending on how you want your schema to work). It should never be zero or negative.
2. Run-time type checking. GraphQL helps to tighten up the contract between client and server. It does this with strong typing of the interface (or schema). This helps us have greater confidence about what we're receiving from the server and what the server is receiving from the client.

This package adds to the base options available in GraphQL to support types that are reasonably common in defining schemas or interfaces to data.

A date string, such as 2007-12-03, compliant with the full-date format outlined in section 5.6 of the RFC 3339 profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar.

This scalar is a description of the date, as used for birthdays for example. It cannot represent an instant on the time-line.

Result Coercion

Javascript Date instances are coerced to an RFC 3339 compliant date string. Invalid Date instances raise a field error.

Input Coercion

When expected as an input type, only RFC 3339 compliant date strings are accepted. All other input values raise a query error indicating an incorrect type.

A time string at UTC, such as 10:15:30Z, compliant with the full-time format outlined in section 5.6 of the RFC 3339 profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar.

This scalar is a description of a time instant such as the opening bell of the New York Stock Exchange for example. It cannot represent an exact instant on the time-line.

This scalar ignores leap seconds (thereby assuming that a minute constitutes of 59 seconds), in this respect it diverges from the RFC 3339 profile.

Where an RFC 3339 compliant time string has a time-zone other than UTC, it is shifted to UTC. For example, the time string "14:10:20+01:00" is shifted to "13:10:20Z".

Result Coercion

Javascript Date instances are coerced to an RFC 3339 compliant time string by extracting the UTC time part. Invalid Date instances raise a field error.

Input Coercion

When expected as an input type, only RFC 3339 compliant time strings are accepted. All other input values raise a query error indicating an incorrect type.

A date-time string at UTC, such as 2007-12-03T10:15:30Z, compliant with the date-time format outlined in section 5.6 of the RFC 3339 profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar.

This scalar is a description of an exact instant on the time-line such as the instant that a user account was created.

This scalar ignores leap seconds (thereby assuming that a minute constitutes of 59 seconds). In this respect it diverges from the RFC 3339 profile.

Where an RFC 3339 compliant date-time string has a time-zone other than UTC, it is shifted to UTC. For example, the date-time string "2016-01-01T14:10:20+01:00" is shifted to "2016-01-01T13:10:20Z".

Result Coercion

JavaScript Date instances and timestamps (represented as 32-bit signed integers) are coerced to RFC 3339 compliant date-time strings. Invalid Date instances raise a field error.

Input Coercion

When expected as an input type, only RFC 3339 compliant date-time strings are accepted. All other input values raise a query error indicating an incorrect type.

Taken from graphql-iso-date

The javascript Date as integer. Type represents date and time as number of milliseconds from start of UNIX epoch.

Taken from GraphQLTimestamp.js

String that will have a value of format ±hh:mm. List of tz database time zones.

Integers that will have a value of 0 or more. Uses parseInt().

Integers that will have a value of 0 or less. Uses parseInt().

Integers that will have a value greater than 0. Uses parseInt().

Integers that will have a value less than 0. Uses parseInt().

Floats that will have a value of 0 or more. Uses parseFloat().

Floats that will have a value of 0 or less. Uses parseFloat().

Floats that will have a value greater than 0. Uses parseFloat().

Floats that will have a value less than 0. Uses parseFloat().

A field whose value conforms to the standard internet email address format as specified in RFC822.

A field whose value conforms to the standard URL format as specified in RFC3986, and it uses real JavaScript URL objects.

A field whose value conforms to the standard E.164 format as specified in E.164 specification. Basically this is +17895551234. The very powerful libphonenumber library is available to take that format, parse and display it in whatever display format you want. It can also be used to parse user input and get the E.164 format to pass into a schema.

A field whose value conforms to the mongodb object id format as explained in the documentation

We're going to start with a limited set as suggested here and here.

Which gives us the following countries:

• US - United States
• UK - United Kingdom
• DE - Germany
• CA - Canada
• FR - France
• IT - Italy
• AU - Australia
• NL - Netherlands
• ES - Spain
• DK - Denmark
• SE - Sweden
• BE - Belgium
• IN - India

This is really a practical decision of weight (of the package) vs. completeness.

In the future we might expand this list and use the more comprehensive list found here.

A long integer type for graphql-js. This implementation gives you more than 32 bits rather than the default 32-bit GraphQLInt. It uses native BigInt implementation of JavaScript. The GraphQL spec limits its Int type to 32-bits. Maybe you've seen this error before: Issue on graphql-js

If your environment doesn't support BigInt, it will support 53-bit values at maximum. You can use polyfills to support 64-bit values.

GraphQLError: Argument "num" has invalid value 9007199254740990.
              Expected value of type ""Int"", found 9007199254740990.

Based on graphql-bigint

In order to support BigInt in JSON.parse and JSON.stringify, it is recommended to install this npm package together with this scalar. Otherwise, JavaScript will serialize the value as string. json-bigint-patch

A field whose value is a generic Globally Unique Identifier.

A field whose value is a hexadecimal.

A field whose value is a hex color code.

A field whose value is a CSS HSL color.

A field whose value is a IPv4 address.

A field whose value is a IPv6 address.

A field whose value is a ISBN-10 or ISBN-13 number.

A field whose value is a IEEE 802 48-bit MAC address.

A field whose value is a valid TCP port within the range of 0 to 65535.

A field whose value is a CSS RGB color.

A field whose value is a CSS RGBA color.

A US currency string, such as $21.25.

Uses graphql-currency-scalars

A field whose value is an ISO-4217 currency.

The JSON scalar type represents JSON values as specified by ECMA-404.

Based on graphql-type-json

The JSONObject scalar type represents JSON objects as specified by ECMA-404.

Based on graphql-type-json

The Byte scalar type represents byte value as specified by NodeJS Buffer type

Includes IBAN specifications for the following countries:

• AD - Andorra
• AE - United Arab Emirates
• AL - Albania
• AO - Angola
• AT - Austria
• AZ - Azerbaijan
• BA - Bosnia and Herzegovina
• BE - Belgium
• BF - Burkina Faso
• BG - Bulgaria
• BH - Bahrain
• BI - Burundi
• BJ - Benin
• BR - Brazil
• BY - Belarus
• CH - Switzerland
• CI - Côte d'Ivoire
• CM - Cameroon
• CR - Costa Rica
• CV - Cabo Verde
• CY - Cyprus
• DE - Germany
• DK - Denmark
• DO - Dominican Republic
• DZ - Algeria
• EE - Estonia
• ES - Spain
• FI - Finland
• FO - Faroe Islands
• FR - France
• GB - United Kingdom of Great Britain and Northern Ireland
• GE - Georgia
• GI - Gibraltar
• GL - Greenland
• GR - Greece
• GT - Guatemala
• HR - Croatia
• HU - Hungary
• IE - Ireland
• IL - Israel
• IQ - Iraq
• IR - Iran (Islamic Republic of)
• IS - Iceland
• IT - Italy
• JO - Jordan
• KW - Kuwait
• KZ - Kazakhstan
• LB - Lebanon
• LC - Saint Lucia
• LI - Liechtenstein
• LT - Lithuania
• LU - Luxembourg
• LV - Latvia
• MC - Monaco
• MD - Moldova, Republic of
• ME - Montenegro
• MG - Madagascar
• MK - North Macedonia
• ML - Mali
• MR - Mauritania
• MT - Malta
• MU - Mauritius
• MZ - Mozambique
• NL - Netherlands
• NO - Norway
• PK - Pakistan
• PL - Poland
• PS - Palestine, State of
• PT - Portugal
• QA - Qatar
• RO - Romania
• RS - Serbia
• SA - Saudi Arabia
• SC - Seychelles
• SE - Sweden
• SI - Slovenia
• SK - Slovakia
• SM - San Marino
• SN - Senegal
• ST - Sao Tome and Principe
• SV - El Salvador
• TL - Timor-Leste
• TN - Tunisia
• TR - Turkey
• UA - Ukraine
• VA - Holy See
• VG - Virgin Islands (British)
• XK - Kosovo

A GraphQLScalarType object generator that takes two arguments:

• name - The name of your custom type
• regex - The regex to be used to check against any values for fields with this new type

const MyRegexType = new RegularExpression('MyRegexType', /^ABC$/);

GraphQL is a wonderful new approach to application data and API layers that's gaining momentum. If you have not heard of it, start here and check out Apollo also.

However, for all of GraphQL's greatness. It is missing a couple things that we have (and you might) find very useful in defining your schemas. Namely GraphQL has a limited set of scalar types and we have found there are some additional scalar types that are useful in being more precise in our schemas. Thankfully, those sharp GraphQL folks provided a simple way to add new custom scalar types if needed. That's what this package does.

NOTE: We don't fault the GraphQL folks for these omissions. They have kept the core small and clean. Arguably not every project needs these additional scalar types. But we have, and now you can use them too if needed.

Released under the MIT license.

Issues and Pull Requests are always welcome.

Please read our contribution guidelines.

This library was originally published as @okgrow/graphql-scalars. It was created and maintained by the company ok-grow. We, The Guild, took over the maintaince of that library later on.

We also like to say thank you to @adriano-di-giovanni for being extremely generous and giving us the graphql-scalars name on npm which was previously owned by his own library.

And thanks to excitement-engineer for graphql-iso-date, stems for graphql-bigint, taion for graphql-type-json, langpavel for GraphQLTimestamp.js