The Keyboard FeatherWing is an easy way to add a handheld Qwerty keyboard and a 2.6” color display (+ more) to your project! It fits well in your hands and is great for typing with your thumbs, early 2000s-style.

The FeatherWing itself does not contain an MCU/CPU/SoC that you can program; you will need a board compatible with the Adafruit Feather System.

For revision 1, see the tag rev1.

• 2.6” 320x240 16-bit color LCD with resistive touch screen
• QWERTY keyboard
• 5-way button
• 4 soft tactile buttons
• A Neopixel
• microSD connector
• Stemma QT/Qwiic connector
• An Ambient Light Sensor
• On/Off switch
• Dual row sockets
• Four mounting holes
• GPIO solder jumpers

For more information visit https://kfw.solder.party/

You can find example code here: https://github.com/solderparty/keyboard_featherwing_sw

This board uses an ATSAMD20 chip as a i2c peripheral that can be polled to get the key FIFO, as well as used as a simple GPIO Expander, the firmware for the SAM can be found here: https://github.com/solderparty/bbq10kbd_i2c_sw