createthis / linux_gpu_mining Goto Github PK

Hello,

Thanks very much for your codes. Can you give me the instruction that trade the bitcoins using this method
Thank you!
Best regards

My card temperature going above 70C as it set 80% fan speed how can i increase to 90%?

Hello There,

Thanks for the video and the git hub repository. You have made it so simple.
I was hoping you could help me.
I have been running the miner since December 20 with no problems,(It's been great!)
about 24 hours ago my miner hangs for a couple of seconds and started rejecting every share for about 25 minutes then accepts a again, this keeps happening.
Can you advise me on whats happening ?

the number of milliseconds it takes also increases dramatically.
Do you know why this is?

here is a copy of my miner in terminal

INFO: Detected new work: be5fbc78795ea4def9a5
Temp: GPU0: 58C GPU1: 54C GPU2: 60C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 621 Sol/s GPU1: 422 Sol/s GPU2: 416 Sol/s GPU3: 633 Sol/s GPU4: 419 Sol/s GPU5: 419 Sol/s GPU6: 414 Sol/s
Total speed: 3344 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 174W | 3.57 Sol/W |
| 1 | 129W | 3.27 Sol/W |
| 2 | 133W | 3.13 Sol/W |
| 3 | 182W | 3.48 Sol/W |
| 4 | 126W | 3.33 Sol/W |
| 5 | 134W | 3.13 Sol/W |
| 6 | 99W | 4.18 Sol/W |
+-----+-------------+--------------+
INFO 18:24:58: GPU6 Rejected share 477651ms [A:9, R:1]
INFO 18:25:08: GPU2 Rejected share 483204ms [A:10, R:1]
INFO 18:25:09: GPU5 Rejected share 483464ms [A:9, R:1]
INFO 18:25:10: GPU5 Rejected share 479766ms [A:9, R:2]
INFO 18:25:10: GPU0 Rejected share 475183ms [A:7, R:1]
INFO 18:25:10: GPU3 Rejected share 474216ms [A:15, R:1]
INFO 18:25:13: GPU1 Rejected share 469536ms [A:5, R:2]
INFO 18:25:16: GPU4 Rejected share 471211ms [A:12, R:1]
Temp: GPU0: 58C GPU1: 54C GPU2: 60C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 650 Sol/s GPU1: 439 Sol/s GPU2: 414 Sol/s GPU3: 637 Sol/s GPU4: 417 Sol/s GPU5: 423 Sol/s GPU6: 423 Sol/s
Total speed: 3403 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 179W | 3.63 Sol/W |
| 1 | 132W | 3.33 Sol/W |
| 2 | 129W | 3.21 Sol/W |
| 3 | 171W | 3.73 Sol/W |
| 4 | 130W | 3.21 Sol/W |
| 5 | 129W | 3.28 Sol/W |
| 6 | 129W | 3.28 Sol/W |
+-----+-------------+--------------+
INFO 18:25:24: GPU3 Rejected share 475886ms [A:15, R:2]
INFO 18:25:28: GPU3 Rejected share 472996ms [A:15, R:3]
INFO 18:25:29: GPU0 Rejected share 471503ms [A:7, R:2]
INFO 18:25:29: GPU1 Rejected share 462886ms [A:5, R:3]
INFO 18:25:30: GPU5 Rejected share 463139ms [A:9, R:3]
INFO: Detected new work: e4a31add77faf286b4a2
INFO 18:25:31: GPU3 Rejected share 461905ms [A:15, R:4]
INFO 18:25:31: GPU4 Rejected share 455938ms [A:12, R:2]
INFO 18:25:32: GPU6 Rejected share 451982ms [A:9, R:2]
INFO 18:25:32: GPU4 Rejected share 451089ms [A:12, R:3]
INFO 18:25:32: GPU5 Rejected share 444811ms [A:9, R:4]
INFO 18:25:37: GPU5 Rejected share 449042ms [A:9, R:5]
INFO 18:25:38: GPU5 Rejected share 446685ms [A:9, R:6]
INFO 18:25:39: GPU6 Rejected share 447241ms [A:9, R:3]
INFO 18:25:39: GPU6 Rejected share 445942ms [A:9, R:4]
INFO 18:25:41: GPU3 Rejected share 444825ms [A:15, R:5]
INFO 18:25:46: GPU0 Rejected share 441897ms [A:7, R:3]
INFO 18:25:48: GPU0 Rejected share 442942ms [A:7, R:4]
Temp: GPU0: 58C GPU1: 54C GPU2: 60C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 648 Sol/s GPU1: 423 Sol/s GPU2: 417 Sol/s GPU3: 628 Sol/s GPU4: 417 Sol/s GPU5: 420 Sol/s GPU6: 421 Sol/s
Total speed: 3374 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 186W | 3.48 Sol/W |
| 1 | 131W | 3.23 Sol/W |
| 2 | 129W | 3.23 Sol/W |
| 3 | 183W | 3.43 Sol/W |
| 4 | 128W | 3.26 Sol/W |
| 5 | 128W | 3.28 Sol/W |
| 6 | 125W | 3.37 Sol/W |
+-----+-------------+--------------+
INFO 18:25:49: GPU0 Rejected share 429712ms [A:7, R:5]
INFO: Detected new work: 9db90c2fa8959abc518e
INFO 18:25:54: GPU3 Rejected share 433676ms [A:15, R:6]
Temp: GPU0: 58C GPU1: 54C GPU2: 60C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 656 Sol/s GPU1: 411 Sol/s GPU2: 416 Sol/s GPU3: 636 Sol/s GPU4: 416 Sol/s GPU5: 414 Sol/s GPU6: 413 Sol/s
Total speed: 3362 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 185W | 3.55 Sol/W |
| 1 | 133W | 3.09 Sol/W |
| 2 | 130W | 3.20 Sol/W |
| 3 | 191W | 3.33 Sol/W |
| 4 | 129W | 3.22 Sol/W |
| 5 | 132W | 3.14 Sol/W |
| 6 | 131W | 3.15 Sol/W |
+-----+-------------+--------------+
INFO: Detected new work: ed3ab19248d312a35c9a
Temp: GPU0: 58C GPU1: 54C GPU2: 58C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 654 Sol/s GPU1: 421 Sol/s GPU2: 420 Sol/s GPU3: 630 Sol/s GPU4: 411 Sol/s GPU5: 425 Sol/s GPU6: 413 Sol/s
Total speed: 3374 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 193W | 3.39 Sol/W |
| 1 | 129W | 3.26 Sol/W |
| 2 | 41W | 10.24 Sol/W |
| 3 | 181W | 3.48 Sol/W |
| 4 | 132W | 3.11 Sol/W |
| 5 | 130W | 3.27 Sol/W |
| 6 | 127W | 3.25 Sol/W |
+-----+-------------+--------------+
Temp: GPU0: 58C GPU1: 54C GPU2: 60C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 632 Sol/s GPU1: 421 Sol/s GPU2: 421 Sol/s GPU3: 628 Sol/s GPU4: 407 Sol/s GPU5: 429 Sol/s GPU6: 421 Sol/s
Total speed: 3359 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 188W | 3.36 Sol/W |
| 1 | 120W | 3.51 Sol/W |
| 2 | 123W | 3.42 Sol/W |
| 3 | 184W | 3.41 Sol/W |
| 4 | 129W | 3.16 Sol/W |
| 5 | 103W | 4.17 Sol/W |
| 6 | 128W | 3.29 Sol/W |
+-----+-------------+--------------+
Temp: GPU0: 58C GPU1: 54C GPU2: 60C GPU3: 58C GPU4: 59C GPU5: 60C GPU6: 58C
GPU0: 666 Sol/s GPU1: 419 Sol/s GPU2: 414 Sol/s GPU3: 636 Sol/s GPU4: 414 Sol/s GPU5: 417 Sol/s GPU6: 425 Sol/s
Total speed: 3391 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 175W | 3.81 Sol/W |
| 1 | 133W | 3.15 Sol/W |
| 2 | 125W | 3.31 Sol/W |
| 3 | 181W | 3.51 Sol/W |
| 4 | 127W | 3.26 Sol/W |
| 5 | 129W | 3.23 Sol/W |
| 6 | 127W | 3.35 Sol/W |
+-----+-------------+--------------+
INFO 18:27:50: GPU2 Rejected share 549743ms [A:10, R:2]
INFO 18:27:51: GPU3 Rejected share 539498ms [A:15, R:7]
INFO 18:27:52: GPU3 Rejected share 537601ms [A:15, R:8]
INFO 18:27:52: GPU2 Rejected share 533537ms [A:10, R:3]
INFO 18:27:52: GPU0 Rejected share 533753ms [A:7, R:6]
INFO 18:27:53: GPU6 Rejected share 532950ms [A:9, R:5]
INFO 18:27:54: GPU5 Rejected share 532896ms [A:9, R:7]
INFO 18:27:54: GPU6 Rejected share 523473ms [A:9, R:6]
INFO 18:27:55: GPU3 Rejected share 513462ms [A:15, R:9]
INFO 18:27:55: GPU6 Rejected share 512319ms [A:9, R:7]
INFO 18:28:02: GPU0 Rejected share 493570ms [A:7, R:7]
INFO 18:28:03: GPU4 Rejected share 478802ms [A:12, R:4]
INFO 18:28:03: GPU4 Rejected share 477744ms [A:12, R:5]
INFO 18:28:03: GPU3 Rejected share 476033ms [A:15, R:10]
INFO 18:28:05: GPU0 Rejected share 476156ms [A:7, R:8]
INFO 18:28:05: GPU2 Rejected share 469631ms [A:10, R:4]
INFO 18:28:06: GPU3 Rejected share 465674ms [A:15, R:11]
INFO 18:28:07: GPU0 Rejected share 0ms [A:7, R:9]
ERROR: Lost connection with the server.
INFO: Attempt to restore connection.
INFO: Connection restored, pool: eu1-zcash.flypool.org:3333.
INFO: Target: 0004189374bc6a7e...
INFO: Detected new work: 6227d44aa85100d98084
INFO 18:28:16: GPU2 Accepted share 518ms [A:11, R:4]
INFO 18:28:21: GPU1 Accepted share 1063ms [A:6, R:3]
INFO 18:28:33: GPU1 Accepted share 1894ms [A:7, R:3]
INFO 18:28:33: GPU2 Accepted share 1766ms [A:12, R:4]
INFO 18:28:34: GPU0 Accepted share 2303ms [A:8, R:9]
INFO 18:28:34: GPU3 Accepted share 1876ms [A:16, R:11]
INFO 18:28:38: GPU6 Accepted share 1175ms [A:10, R:7]

Your assistance would greatly be appreciated
Thanks Gash

PS Thanks again for the repository.

Hello !
I just watch your Youtube video https://www.youtube.com/watch?v=kha1HQ4Lgu4 well done, I liked it !

The process of GPU-mining-on-Linux is very well described, quite simple to setup as per your good instructions !

One simple question: where the minerd executable comes from ? In the video description you mention altcoins, I'm confused.

I propose you publish a link the original repository where you obtained the "minerd" from (unless you built it yourself as closed-source): this would help people staying up to date if you do not syncronize your git tree, and could incentivate users to follow up on the possible bugs, configurations and so forth.

Does this observation make sense ?

Best regards and Merry Christmas,
Massimiliano

What is the reason to change the GPU fan control? Is it to conserve power for efficiency? Is there any harm in not doing that and just letting it run on the default settings?

I have installed using this repository on three systems, each with 6 Zotac GTX 1070 GPUs with great success, except in controlling GPU fan speed. There is an error consistent to all builds when running ./underclock.sh. When I look at Nvidia-settings there is no option to control the fan speed and the fans are not running at 80%. I have temps of 70 to 71C on the GPUs so I believe they are auto cooling at a temp setting of 70 perhaps. I would very much like to speed them up to 90%, but any changes made in the underclock.sh file do not take effect. I have tried to find a solution, but it seems there is no clear way to do this with the Nvidia drivers. This error occurs with the fan settings at 80 as in the repository example file as well, Power settings are taking effect, I have set to 125 watts per card.

Ubuntu 16.04
Nvidia driver 384.90
Screen on run follows:

ERROR: Error assigning value 90 to attribute 'GPUTargetFanSpeed'
(canefire-Z270P-D3:0[fan:0]) as specified in assignment
'[fan:0]/GPUTargetFanSpeed=90' (Unknown Error).

ERROR: Error assigning value 90 to attribute 'GPUTargetFanSpeed'
(canefire-Z270P-D3:0[fan:1]) as specified in assignment
'[fan:1]/GPUTargetFanSpeed=90' (Unknown Error).

./underclock.sh: 4: ./underclock.sh: Sudo: not found

ERROR: Error assigning value 90 to attribute 'GPUTargetFanSpeed'
(canefire-Z270P-D3:0[fan:3]) as specified in assignment
'[fan:3]/GPUTargetFanSpeed=90' (Unknown Error).

./underclock.sh: 6: ./underclock.sh: Sudo: not found

ERROR: Error assigning value 90 to attribute 'GPUTargetFanSpeed'
(canefire-Z270P-D3:0[fan:5]) as specified in assignment
'[fan:5]/GPUTargetFanSpeed=90' (Unknown Error).

Persistence mode is already Enabled for GPU 00000000:01:00.0.
Persistence mode is already Enabled for GPU 00000000:03:00.0.
Persistence mode is already Enabled for GPU 00000000:04:00.0.
Persistence mode is already Enabled for GPU 00000000:05:00.0.
Persistence mode is already Enabled for GPU 00000000:08:00.0.
Persistence mode is already Enabled for GPU 00000000:09:00.0.
All done.
Power limit for GPU 00000000:01:00.0 was set to 125.00 W from 125.00 W.
Power limit for GPU 00000000:03:00.0 was set to 125.00 W from 125.00 W.
Power limit for GPU 00000000:04:00.0 was set to 125.00 W from 125.00 W.
Power limit for GPU 00000000:05:00.0 was set to 125.00 W from 125.00 W.
Power limit for GPU 00000000:08:00.0 was set to 125.00 W from 125.00 W.
Power limit for GPU 00000000:09:00.0 was set to 125.00 W from 125.00 W.
All done.

I want to use this but I got the following error:

~/linux_gpu_mining$ ./miner --server stratum-zec.antpool.com --port 8899 --user **** --pass ***
 +-------------------------------------------------+
|         EWBF's Zcash CUDA miner. 0.3.4b         |
+-------------------------------------------------+
INFO: Current pool: stratum-zec.antpool.com:8899
INFO: Selected pools: 1
INFO: Solver: Auto.
INFO: Devices: All.
INFO: Temperature limit: 90
INFO: Api: Disabled
---------------------------------------------------
INFO: Target: 0001ffffffffffff...
INFO: Detected new work: 1515962712_114536
INFO: Detected new work: 1515962712_114536
Temp: 

Total speed: 0 Sol/s

What should I do? what exactly is the problem?

I have tried this 4 times on Ubuntu 20 with 2 3060ti.

Whenever I run ./enable_nvidia_fan_control.sh I am greeted with a black screen and a cross pointer.

After hours of debuggins I could fix this using

switch to a TTY (ctrl+alt+F2) or (ctrl+alt+F4), log in, and sudo rm /etc/X11/xorg.conf

I am getting the following error when trying to change the address to bitcoin address.
Is it a different address? If yes, how to create that address? Thank you.

`tet@tet-HP-ENVY-15-Notebook-PC:~/linux_gpu_mining$ ./start.sh
+-------------------------------------------------+
| EWBF's Zcash CUDA miner. 0.3.4b |
+-------------------------------------------------+
INFO: Current pool: us.hushmine.pro:9009
INFO: Selected pools: 1
INFO: Solver: Auto.
INFO: Devices: All.
INFO: Temperature limit: 90
INFO: Api: Disabled

ERROR: Stratum authorization error
`

Hi, thank for your video https://www.youtube.com/watch?v=kha1HQ4Lgu4
I want to run your GPU miner on a Debian server. After running./miner I got segment fault error
Do you have any idea? Do you know any GPU miners for Debian?

Best Regards,

hello
when i run ./start.sh :

i get that problem

Hey mate, cool script and tut, but, apart from installing vim and chrome (which ain't needed really) in the install-dependencies.sh you should add

sudo apt-get install nvidia-xconfig nvidia-smi

To make sure nvidia-xconfig and nvidia-smi are there, as on some linux distributions (e.g. kali, based on Debian 9 atm.) they are not pre-installed! Thanks for reading, and I hope you'll improve it ;)