classicdiy / classicmqtt Goto Github PK

All 3 temperatures metrics are in C or F?

Is it possible to add support for TLS Certificates?

https://aws.amazon.com/blogs/iot/how-to-implement-mqtt-with-tls-client-authentication-on-port-443-from-client-devices-python/

hello,
this is a really interesting project. I was wondering if it can be integrated to home assistant. I do have an esp32 wemos d1 mini. does this board works?
im really green will need help with hardware and software setup. idk id mosquitto broker will work and i have never used before.
any help will be mos appreciated
thanks
M.

I recently went through the iotstack setup and i think i have everything setup correctly except i noticed that grafana isnt showing anything on the imported dashboard. when looking at the data connections i noticed i was getting the following message when i clicked save& test
datasource is working. 0 measurements found

based on everythign else it appears to be working

I would like to try this out. While I can take care of the programming aspect, I am kind of clueless what components for the complete hardware setup do I need. Would you mind listing an example of all parts (besides the Midnight Classic, and WiFi router) that I would need? Perhaps with Power Over Ethernet, or a separate Power Supply. I am not sure how would the Classic supply power to this chip, and what kind of device do I need to plug this chip into. Any recommended brand/type?
Thank you in advance.

I cannot get it to work. I run it in ubuntu 20.04 AMD64 in a python virtualenv

I get it running and can send commands to it:
# python3 ClassicMQTT/ClassicMQTT/code/Python/classic_mqtt.py --classic [IP] --classic_name classic-150-1 --mqtt [IP] --mqtt_root /midnite --mqtt_user midnite --mqtt_pass *******

2021-09-04 16:09:46,253:INFO:classic_mqtt:classic_mqtt starting up...
2021-09-04 16:09:46,256:INFO:classic_mqtt:classicHost = [IP]
2021-09-04 16:09:46,257:INFO:classic_mqtt:classicPort = 502
2021-09-04 16:09:46,257:INFO:classic_mqtt:classicName = classic-150-1
2021-09-04 16:09:46,257:INFO:classic_mqtt:mqttHost = [IP]
2021-09-04 16:09:46,257:INFO:classic_mqtt:mqttPort = 1883
2021-09-04 16:09:46,257:INFO:classic_mqtt:mqttRoot = midnite
2021-09-04 16:09:46,257:INFO:classic_mqtt:mqttUser = midnite
2021-09-04 16:09:46,257:INFO:classic_mqtt:mqttPassword = **********
2021-09-04 16:09:46,257:INFO:classic_mqtt:awakePublishRate = 5
2021-09-04 16:09:46,257:INFO:classic_mqtt:snoozePublishRate = 300
2021-09-04 16:09:46,257:INFO:classic_mqtt:awakePublishLimit = 60
2021-09-04 16:09:46,257:DEBUG:classic_mqtt:snoozeCycleLimit: 60
2021-09-04 16:09:46,257:INFO:classic_mqtt:Connecting with clientId=midnite_mqttclient_589
2021-09-04 16:09:46,258:INFO:classic_mqtt:Connecting to MQTT 10.39.199.28:1883
2021-09-04 16:09:46,264:DEBUG:classic_mqtt:MQTT connected OK Returned code=0
2021-09-04 16:09:46,265:DEBUG:classic_mqtt:Subscribed to /midnite/classic-150-1/cmnd/#
2021-09-04 16:09:46,266:DEBUG:classic_mqtt:Starting main loop...
2021-09-04 16:12:02,902:DEBUG:classic_mqtt:Received MQTT message {"WAKEPUBLISHRATE":3000, "STAYAWAKE":TRUE}
2021-09-04 16:12:02,902:DEBUG:classic_mqtt:{'wakePublishRate': 3000, 'stayAwake': True}
2021-09-04 16:12:02,902:DEBUG:classic_mqtt:StayAwake received, setting stayAwake to True
2021-09-04 16:12:02,903:DEBUG:classic_mqtt:wakePublishRate message received, setting rate to 3
2021-09-04 16:12:02,903:DEBUG:classic_mqtt:Updating snoozeCycleLimit to 100

But it doesn't seem to send stats to the mqtt, it stays as it forever. I also don't understand that snooze thing, it doens't seem documented.

I found issue 35 and adjusted the import as described. I now see a new error:
ile "/home/schroew/ClassicMQTT-master/code/Python/classic_mqtt.py", line 17, in
from support.classic_modbusdecoder import getModbusData
File "/home/schroew/ClassicMQTT-master/code/Python/support/classic_modbusdecoder.py", line 13, in
from pymodbus.compat import iteritems
ModuleNotFoundError: No module named 'pymodbus.compat'

Any advice would be appreciated !

It looks like the new version of paho breaks the classic script. I resolved by changing line 480:
#mqttClient = mqttclient.Client(clientId)
mqttClient = mqttclient.Client(mqttclient.CallbackAPIVersion.VERSION1, clientId)

I'm getting a failure trying to run this for testing... when I run it, I'm getting ModuleNotFoundError: No module named 'pymodbus.client.sync'.

I have already tried re-running 'pip install pymodbus', and it claims the requirement is already satisfied.

Any idea as to what I'm doing wrong?