Expandable 6 Channel ESP32 Energy Meter Add-on Board about expandable-6-channel-esp32-energy-meter HOT 11 CLOSED

Hi @timwing - I'm sorry the add-on board is giving you issues. Can you confirm the position of the right set of jumpers on the add-on board? The default for "6chan_energy_meter-add-on_jp8-jp11.yaml" is the first (left most) position, which is GPIO 0 for the CS pin.

If the pin is in the correct position, check that there isn't a cold solder joint on the jumper pin, or any other obvious problems on the top IC chip. If that is the case, please let me know, and I'll send you a new one since it's not necessarily an easy fix.

from expandable-6-channel-esp32-energy-meter.

@CircuitSetup, That was it! Looks like 5 of the 6 CS (outboard side) pins were not connected at the board. All fixed and working now. Thank you!

Tim

from expandable-6-channel-esp32-energy-meter.

@CircuitSetup So I am having some additional issues with the boards. I have had two of the 3.5mm jacks come off the board...got all those soldered back on to the main & add-on boards. Then everything was working until a day later when I had the 9-12vac come off the main board. Now that is soldered back on but now I am unable to maintain power to the unit. Works then it shuts off.

from expandable-6-channel-esp32-energy-meter.

Hum, this definitely shouldn't have happened. Are both of your boards green?

from expandable-6-channel-esp32-energy-meter.

Are you referring to the LED or the color of the printed circuit board?

Both of my printed circuit boards are green.

from expandable-6-channel-esp32-energy-meter.

Yes, the circuit board. I ask because there is a new batch of black boards that were manufactured out of house.

For the green ones, these were in house. I'm wondering if I overlooked your board in QA. When it shuts off does the green led turn off too, or just the esp32?

from expandable-6-channel-esp32-energy-meter.

Well now I get no lights on either board or esp32. I do have 11.05vac in the transformer plug.

from expandable-6-channel-esp32-energy-meter.

When the transformer plug came off, did it take any trace with it?

If you measure the output (there is a + and - over the output pins) of the black component next to the plug you should get a DC voltage.

Either way, if its dead, ill gladly send you a new main board. Let me know your order number if thats the case.

from expandable-6-channel-esp32-energy-meter.

I am a little discouraged by the parts connections coming loose. At this point I think replacement would be the best option. Order #200054

from expandable-6-channel-esp32-energy-meter.

You got it. I'll send a new main board asap. It'll be black, but is exactly the same as the green.

from expandable-6-channel-esp32-energy-meter.

This is in the mail!

from expandable-6-channel-esp32-energy-meter.