captainbobsim / the-cessna-172-project-v3 Goto Github PK

The Cessna 172 Project brings hardcore flight simulation to more people - to help others find this wonderful hobby, and enjoy it!

Home Page: https://captainbobsim.com

License: Other

Python 100.00%

simulation flightsimulator cessna172 aviation simulator

the-cessna-172-project-v3's Introduction

The-Cessna-172-Project-V3

Click here to download everything

Your Dream Flight Simulator Has Just Landed

These plans are based on a "Pay What You Want" model. Though I could charge money for these plans, I want to give this project's plans and files away on this GitHub for free.

💗Support development of the project on Patreon! or PayPal!

Section 0 : Documentation
Section 1 : (Archived for now) Nose (Where the PC goes) [defined as from 24" fw of firewall to the firewall]
Section 2 : Structure and All Instruments/Components [defined as from the firewall to 24" aft of firewall]
Section 2A/2G : INSTRUMENT PANELS and panel templates. Letter designates type.
Section 2A : Analog Panel Template (Steam Gauges and Radio Stack)
Section 2G : Garmin G1000 based Cessna 172 Panel

Coming Later:
Section 3/4 : Pilot/CoPilot Seats [defined as 24" aft of firewall to 72" aft]
Section 5 : Instructor Section/Back Seat Bench

🔨Become a Developer

Email [email protected] or go to https://captainbobsim.com/want-to-help/

📚C172 research/Dimensions

Copyright

Spreadsheet

Top level files are usually to big to store on GitHub, so instead you can download them from the links on this spreadsheet. Please start an issue should a link not properly work.

Take a look at the Standard components the Cessna 172 Project uses.

Issues:

We all have issues. Let's be honest. If you find any that pertain to the 172 project, create a new blank issue, and describe what it is the best you can. Create a new issue for if a part breaks, so we can factor it into a redesign.

Why?

The Flight Simulation Community has given me so much and I would like to give back. Free C172 Plans were what started me off in flight simulation when I was younger, and I don't want cost to be an obstacle for any aspiring individuals to build their very own Cessna 172 Flight Sim.

If you are just getting started in Flight Simulation: I believe in you. You can do this. It will take time and hard work, but for me it is definitely worth it, and you might find it is too.

"Everyone is smart and can be smarter"

Special Thanks:

Thank you to Kovinator for being an absolute madlad and helping so much with the instruments! He made all of the servo small fuel instruments as well as various adaptaions of large instruments.
Thank you to knector01 for making the dual potentiometer for the dimming knobs!

the-cessna-172-project-v3's People

Contributors

Stargazers

Watchers

Forkers

br0mmie scls19fr callahanp kovinator dragungundras gtt1229 lewark vlad7971 chernogorsky echoalphaflightsim protection6 dataggregator gokmenhakan luizrenault okvojta barnsey77 jacob-gigilal hoynedawg

the-cessna-172-project-v3's Issues

Give me my adorable ears back!

Airtable

Airtable Record

Yoke linkage arm is too high for ceiling

Fix Half of 2-1-101

Swap these

2A Panel Cutout Instrument Knobs

Any instrument with a knob (Altimeter, VSI, HDG, VOR1/2, ADF) has knob cutouts that aren't exactly good.
Altimeter/VSI fit decent, but need adjustment.
VOR, ADF, HDG size needs to be determined.

1-1-102 12 o'clock Stringer Thickness incorrect.

should be set to "stdply"

Altimeter is Too Tight!

Flaps support panel cutout

Instruments Ruined in "Grand Rotation"

Need to reorient everything to accommodate a design standard
Airspeed Indicator, Vertical Speed Indicator affected

Thickness of mounting thing standardized

22/32

Hole size

Increase mounting hole size from .25 to .3 or .35

Temperature window feels left out

Missing the bunny ear holes on support structure

Panel is 2" too low

Yoke is currently about 23 inches from floor, should be about 25.
Need to check multiple sources to be sure.

Rib panel

Make section 2 templates dxf for instrumebts, panel, etc

I want everything to be "opensourceish" so that people can easily build their own instruments based from my templates (but under this license not be able to sell them for profit)

Windshield support arms should extend to glareshield

Split Section 1 "sheet metal" piece into 3 parts and delete base

How to print large paper stuff tutorial

Everyone is like "bro. how the heck do I actually do this"
and I'm like - "just watch every single video I've ever posted and somewhere it probably says it"

I need a "print large papers" tutorial, or one I can link to using the adobe reader poster mode.

Check the panels upper geometry

Airtable

Airtable Record

Should I make the yoke ugly on purpose?

The actual yoke has a carve out making the yoke wiring accessible from the back (still need to decide though.

I have no clue how to delete files from the Github. Send help!

2-1-100 Windshield doesn't mate well

Should be flush- which would require twisting/planing plywood.

CAD mounting holes for Yoke system

AS Cutout

Airspeed cutout is on wrong side. Should be like altimeter

Ideally, instrument glass would not rotate

Make an awesome notch!

2-1-100 sw panel interference

Stub interferes with switch panel

Make yoke mounting holes

1-1-101, rib insert at 7 o'clock position is "slightly bonkers"

Not tangent to exterior line.

Some Files Too Large

Some files skipped in "export" due to size constraints.

Visiting folder Cessna 172 Project Version 3 Visiting file c172 blend model v1 . f3d Opening c172 blend modelSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\c172 blend model_v1.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\c172 blend model_v1.step Closing c172 blend model Visiting folder Hardware Visiting file 1-1 Shell Complete Assy_2358T53 v1 . f3d Opening1-1 Shell Complete Assy_2358T53Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\1-1 Shell Complete Assy_2358T53_v1.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\1-1 Shell Complete Assy_2358T53_v1.step Closing 1-1 Shell Complete Assy_2358T53 Visiting file Defender Security 5/16 in key Cabinet and Drawer Lock v5 . f3d filenameDefender Security 5/16 in key Cabinet and Drawer Lockcontained bad chars, replacing byDefender Security 5 16 in key Cabinet and Drawer LockOpeningDefender Security 5/16 in key Cabinet and Drawer LockSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Defender Security 5 16 in key Cabinet and Drawer Lock_990749b7_v5.f3d filenameDefender Security 5/16 in key Cabinet and Drawer Lockcontained bad chars, replacing byDefender Security 5 16 in key Cabinet and Drawer LockSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Defender Security 5 16 in key Cabinet and Drawer Lock_990749b7_v5.step Closing Defender Security 5/16 in key Cabinet and Drawer Lock Visiting file M2 90592A075_STEEL HEX NUT v1 . f3d OpeningM2 90592A075_STEEL HEX NUTSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\M2 90592A075_STEEL HEX NUT_v1.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\M2 90592A075_STEEL HEX NUT_v1.step Closing M2 90592A075_STEEL HEX NUT Visiting file M2 92010A802_Passivated 18-8 Phillips Flat Head Screw v1 . f3d OpeningM2 92010A802_Passivated 18-8 Phillips Flat Head ScrewSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\M2 92010A802_Passivated 18-8 Phillips Flat Head Screw_v1.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\M2 92010A802_Passivated 18-8 Phillips Flat Head Screw_v1.step Closing M2 92010A802_Passivated 18-8 Phillips Flat Head Screw Visiting file Microswitch CN0098 v1 . f3d OpeningMicroswitch CN0098Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Microswitch CN0098_v1.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Microswitch CN0098_v1.step Closing Microswitch CN0098 Visiting file Solenoid, Blue v3 . f3d OpeningSolenoid, BlueSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Solenoid, Blue_v3.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Solenoid, Blue_v3.step Closing Solenoid, Blue Visiting file Standard Spacing Block 90 degree v1 . f3d OpeningStandard Spacing Block 90 degreeSaved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Standard Spacing Block 90 degree_v1.f3d Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Hardware\Standard Spacing Block 90 degree_v1.step Closing Standard Spacing Block 90 degree Visiting folder Junk Drawer Visiting file *Trashed* LARGE SOLENOID ACTUAL Simualted CB v2 . f3d filenameTrashed LARGE SOLENOID ACTUAL Simualted CBcontained bad chars, replacing by Trashed LARGE SOLENOID ACTUAL Simualted CBOpeningTrashed LARGE SOLENOID ACTUAL Simualted CB`
Traceback (most recent call last):
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 218, in visit_file
counter += export_file(ctx, format, file, doc)
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 182, in export_file
options = em.createFusionArchiveExportOptions(str(output_path))
File "C:/Users/Trevor/AppData/Local/Autodesk/webdeploy/production/97f9b2cd7bcb11d89be9f43364b3bb92648fda4b/Api/Python/packages\adsk\fusion.py", line 16876, in createFusionArchiveExportOptions
return _fusion.ExportManager_createFusionArchiveExportOptions(self, *args)
RuntimeError: 3 : The file name is not valid.

filename *Trashed* LARGE SOLENOID ACTUAL Simualted CB contained bad chars, replacing by Trashed LARGE SOLENOID ACTUAL Simualted CB
Traceback (most recent call last):
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 218, in visit_file
counter += export_file(ctx, format, file, doc)
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 186, in export_file
options = em.createSTEPExportOptions(str(output_path))
File "C:/Users/Trevor/AppData/Local/Autodesk/webdeploy/production/97f9b2cd7bcb11d89be9f43364b3bb92648fda4b/Api/Python/packages\adsk\fusion.py", line 16837, in createSTEPExportOptions
return _fusion.ExportManager_createSTEPExportOptions(self, *args)
RuntimeError: 3 : The file name is not valid.

Closing Trashed LARGE SOLENOID ACTUAL Simualted CB
Visiting file 2A Panel Drawing v3 . f2d
file 2A Panel Drawing has extension f2d which is not currently handled, skipping
Visiting file ARCHIVE 2A-0-100 v1 . f3d
Opening ARCHIVE 2A-0-100
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\ARCHIVE 2A-0-100_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\ARCHIVE 2A-0-100_v1.step
Closing ARCHIVE 2A-0-100
Visiting file C172 SW Panel Mod CB Tycon v2 . f3d
Opening C172 SW Panel Mod CB Tycon
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\C172 SW Panel Mod CB Tycon_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\C172 SW Panel Mod CB Tycon_v2.step
Closing C172 SW Panel Mod CB Tycon
Visiting file Defender Security 5/16 in key Cabinet and Drawer Lock v1 . f3d
filename Defender Security 5/16 in key Cabinet and Drawer Lock contained bad chars, replacing by Defender Security 5 16 in key Cabinet and Drawer Lock
Opening Defender Security 5/16 in key Cabinet and Drawer Lock
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Defender Security 5 16 in key Cabinet and Drawer Lock_990749b7_v1.f3d
filename Defender Security 5/16 in key Cabinet and Drawer Lock contained bad chars, replacing by Defender Security 5 16 in key Cabinet and Drawer Lock
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Defender Security 5 16 in key Cabinet and Drawer Lock_990749b7_v1.step
Closing Defender Security 5/16 in key Cabinet and Drawer Lock
Visiting file Dual Rocker Switch v1 . f3d
Opening Dual Rocker Switch
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Dual Rocker Switch_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Dual Rocker Switch_v1.step
Closing Dual Rocker Switch
Visiting file Key Assy v2 . f3d
Opening Key Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Key Assy_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Key Assy_v2.step
Closing Key Assy
Visiting file Modified Tyco Circuit Breaker v1 . f3d
Opening Modified Tyco Circuit Breaker
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Modified Tyco Circuit Breaker_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Modified Tyco Circuit Breaker_v1.step
Closing Modified Tyco Circuit Breaker
Visiting file rotary_asm v1 . f3d
Opening rotary_asm
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\rotary_asm_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\rotary_asm_v1.step
Closing rotary_asm
Visiting file Simulated CB Tycon Circuit Breaker v1 . f3d
Opening Simulated CB Tycon Circuit Breaker
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Simulated CB Tycon Circuit Breaker_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Simulated CB Tycon Circuit Breaker_v1.step
Closing Simulated CB Tycon Circuit Breaker
Visiting file Switch Panel Assy v2 . f3d
Opening Switch Panel Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Switch Panel Assy_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Switch Panel Assy_v2.step
Closing Switch Panel Assy
Visiting file Toggle Switch - eBay v1 . f3d
Opening Toggle Switch - eBay
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Toggle Switch - eBay_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Toggle Switch - eBay_v1.step
Closing Toggle Switch - eBay
Visiting file Yoke Assy Attempt 1 v3 . f3d
Opening Yoke Assy Attempt 1
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Yoke Assy Attempt 1_v3.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Yoke Assy Attempt 1_v3.step
Closing Yoke Assy Attempt 1
Visiting file Yoke Gear Prototype v1 . f3d
Opening Yoke Gear Prototype
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Yoke Gear Prototype_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Junk Drawer\Yoke Gear Prototype_v1.step
Closing Yoke Gear Prototype
Visiting file trashed Yoke Assy V2 v1 . f3d
filename *trashed* Yoke Assy V2 contained bad chars, replacing by trashed Yoke Assy V2
Opening *trashed* Yoke Assy V2
Traceback (most recent call last):
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 218, in visit_file
counter += export_file(ctx, format, file, doc)
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 182, in export_file
options = em.createFusionArchiveExportOptions(str(output_path))
File "C:/Users/Trevor/AppData/Local/Autodesk/webdeploy/production/97f9b2cd7bcb11d89be9f43364b3bb92648fda4b/Api/Python/packages\adsk\fusion.py", line 16876, in createFusionArchiveExportOptions
return _fusion.ExportManager_createFusionArchiveExportOptions(self, *args)
RuntimeError: 3 : The file name is not valid.

filename *trashed* Yoke Assy V2 contained bad chars, replacing by trashed Yoke Assy V2
Traceback (most recent call last):
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 218, in visit_file
counter += export_file(ctx, format, file, doc)
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 186, in export_file
options = em.createSTEPExportOptions(str(output_path))
File "C:/Users/Trevor/AppData/Local/Autodesk/webdeploy/production/97f9b2cd7bcb11d89be9f43364b3bb92648fda4b/Api/Python/packages\adsk\fusion.py", line 16837, in createSTEPExportOptions
return _fusion.ExportManager_createSTEPExportOptions(self, *args)
RuntimeError: 3 : The file name is not valid.

Closing trashed Yoke Assy V2
Visiting folder Section 0
Visiting file C172 Reference v2 . f3d
Opening C172 Reference
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\C172 Reference_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\C172 Reference_v2.step
Closing C172 Reference
Visiting file Cessna_172SP v3 . f3d
Opening Cessna_172SP
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\Cessna_172SP_v3.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\Cessna_172SP_v3.step
Closing Cessna_172SP
Visiting folder 0-0 Full Assembly
Visiting file 0-0 Complete 172 Assy v28 . f3d
Opening 0-0 Complete 172 Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-0 Full Assembly\0-0 Complete 172 Assy_v28.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-0 Full Assembly\0-0 Complete 172 Assy_v28.step
Closing 0-0 Complete 172 Assy
Visiting folder 0-1 Full Shell
Visiting file 0-1-001 CANVAS for Reference v5 . f3d
Opening 0-1-001 CANVAS for Reference
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1-001 CANVAS for Reference_v5.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1-001 CANVAS for Reference_v5.step
Closing 0-1-001 CANVAS for Reference
Visiting file 0-1-000 V5 Form Shell Assembly v50 . f3d
Opening 0-1-000 V5 Form Shell Assembly
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1-000 V5 Form Shell Assembly_v50.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1-000 V5 Form Shell Assembly_v50.step
Closing 0-1-000 V5 Form Shell Assembly
Visiting folder 0-1 Archives
Visiting file ARCHIVE 0-1 V6 Form Shell Assembly for Splitting v2 . f3d
Opening ARCHIVE 0-1 V6 Form Shell Assembly for Splitting
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V6 Form Shell Assembly for Splitting_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V6 Form Shell Assembly for Splitting_v2.step
Closing ARCHIVE 0-1 V6 Form Shell Assembly for Splitting
Visiting file ARCHIVE 0-1 V1 Shell Assembly for Splitting v13 . f3d
Opening ARCHIVE 0-1 V1 Shell Assembly for Splitting
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V1 Shell Assembly for Splitting_v13.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V1 Shell Assembly for Splitting_v13.step
Closing ARCHIVE 0-1 V1 Shell Assembly for Splitting
Visiting file 0-1 V3 Form Shell Assembly for Splitting Copy v1 . f3d
Opening 0-1 V3 Form Shell Assembly for Splitting Copy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\0-1 V3 Form Shell Assembly for Splitting Copy_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\0-1 V3 Form Shell Assembly for Splitting Copy_v1.step
Closing 0-1 V3 Form Shell Assembly for Splitting Copy
Visiting file 0-1 C172 Cabin Height Measurements.PNG v1 . art
file 0-1 C172 Cabin Height Measurements.PNG has extension art which is not currently handled, skipping
Visiting file ARCHIVE 0-1 V2 Form Shell Assembly for Splitting v9 . f3d
Opening ARCHIVE 0-1 V2 Form Shell Assembly for Splitting
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V2 Form Shell Assembly for Splitting_v9.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V2 Form Shell Assembly for Splitting_v9.step
Closing ARCHIVE 0-1 V2 Form Shell Assembly for Splitting
Visiting file ARCHIVE 0-1 V4 Form Shell Assembly for Splitting v10 . f3d
Opening ARCHIVE 0-1 V4 Form Shell Assembly for Splitting
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V4 Form Shell Assembly for Splitting_v10.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V4 Form Shell Assembly for Splitting_v10.step
Closing ARCHIVE 0-1 V4 Form Shell Assembly for Splitting
Visiting file ARCHIVE 0-1 V3 Form Shell Assembly for Splitting v7 . f3d
Opening ARCHIVE 0-1 V3 Form Shell Assembly for Splitting
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V3 Form Shell Assembly for Splitting_v7.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 0\0-1 Full Shell\0-1 Archives\ARCHIVE 0-1 V3 Form Shell Assembly for Splitting_v7.step
Closing ARCHIVE 0-1 V3 Form Shell Assembly for Splitting
Visiting folder 0-1 Canvases
Visiting file Rez 4-4.PNG v1 . art
file Rez 4-4.PNG has extension art which is not currently handled, skipping
Visiting file Rez 5-5.PNG v1 . art
file Rez 5-5.PNG has extension art which is not currently handled, skipping
Visiting file 0-1 Firewall looking forward draiwng.PNG v1 . art
file 0-1 Firewall looking forward draiwng.PNG has extension art which is not currently handled, skipping
Visiting file Rez 2-2.PNG v1 . art
file Rez 2-2.PNG has extension art which is not currently handled, skipping
Visiting file 0-1 C172 Cabin Width Measurement.PNG v1 . art
file 0-1 C172 Cabin Width Measurement.PNG has extension art which is not currently handled, skipping
Visiting file 0-1 Front view no dimensions.PNG v1 . art
file 0-1 Front view no dimensions.PNG has extension art which is not currently handled, skipping
Visiting file Rez 6-6 and 7-7.PNG v1 . art
file Rez 6-6 and 7-7.PNG has extension art which is not currently handled, skipping
Visiting file Rez 3-3.PNG v1 . art
file Rez 3-3.PNG has extension art which is not currently handled, skipping
Visiting file 0-1 C172 Top view.PNG v1 . art
file 0-1 C172 Top view.PNG has extension art which is not currently handled, skipping
Visiting file 0-1 c172 side profile Area sections.png v1 . art
file 0-1 c172 side profile Area sections.png has extension art which is not currently handled, skipping
Visiting file Rez 1-1.PNG v1 . art
file Rez 1-1.PNG has extension art which is not currently handled, skipping
Visiting file 01_Cessna172S_sn172S8774_e.jpg v1 . art
file 01_Cessna172S_sn172S8774_e.jpg has extension art which is not currently handled, skipping
Visiting folder Section 1
Visiting file 1-0 Full Section 1 Assy v24 . f3d
Opening 1-0 Full Section 1 Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-0 Full Section 1 Assy_v24.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-0 Full Section 1 Assy_v24.step
Closing 1-0 Full Section 1 Assy
Visiting file 1-1 Shell Complete Assy v88 . f3d
Opening 1-1 Shell Complete Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-1 Shell Complete Assy_v88.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-1 Shell Complete Assy_v88.step
Closing 1-1 Shell Complete Assy
Visiting file 1-1 Shell Complete Assy Drawing v43 . f2d
file 1-1 Shell Complete Assy Drawing has extension f2d which is not currently handled, skipping
Visiting file 1-5-000 PC v2 . f3d
Opening 1-5-000 PC
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-5-000 PC_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-5-000 PC_v2.step
Closing 1-5-000 PC
Visiting folder 1-600 Aux Easter Egg Systems
Visiting file Harbor Freight Awooga Horn v2 . f3d
Opening Harbor Freight Awooga Horn
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-600 Aux Easter Egg Systems\Harbor Freight Awooga Horn_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 1\1-600 Aux Easter Egg Systems\Harbor Freight Awooga Horn_v2.step
Closing Harbor Freight Awooga Horn
Visiting folder Section 2
Visiting file ACTUAL Simualted CB v21 . f3d
Opening ACTUAL Simualted CB
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\ACTUAL Simualted CB_v21.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\ACTUAL Simualted CB_v21.step
Closing ACTUAL Simualted CB
Visiting file Flap Assy v3 . f3d
Opening Flap Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Flap Assy_v3.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Flap Assy_v3.step
Closing Flap Assy
Visiting file Key Assy v25 . f3d
Opening Key Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Key Assy_v25.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Key Assy_v25.step
Closing Key Assy
Visiting file Key Assy Drawing v3 . f2d
file Key Assy Drawing has extension f2d which is not currently handled, skipping
Visiting file Modified Tyco Circuit Breaker v14 . f3d
Opening Modified Tyco Circuit Breaker
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Modified Tyco Circuit Breaker_v14.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Modified Tyco Circuit Breaker_v14.step
Closing Modified Tyco Circuit Breaker
Visiting file Simple Instrument v10 . f3d
Opening Simple Instrument
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Simple Instrument_v10.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\Simple Instrument_v10.step
Closing Simple Instrument
Visiting file timeline G1000 C172 Panel BASIC Sketch v40 . f3d
Opening timeline G1000 C172 Panel BASIC Sketch
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\timeline G1000 C172 Panel BASIC Sketch_v40.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\timeline G1000 C172 Panel BASIC Sketch_v40.step
Closing timeline G1000 C172 Panel BASIC Sketch
Visiting folder 2-0 Full Assy
Visiting file 2-0-000 Full Assembly Section 2 v34 . f3d
Opening 2-0-000 Full Assembly Section 2
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-0 Full Assy\2-0-000 Full Assembly Section 2_v34.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-0 Full Assy\2-0-000 Full Assembly Section 2_v34.step
Closing 2-0-000 Full Assembly Section 2
Visiting folder 2-1 Shell
Visiting file 2-1-100 Full Shell Drawing v13 . f2d
file 2-1-100 Full Shell Drawing has extension f2d which is not currently handled, skipping
Visiting file 2-1-100 Full Shell STRUCTURE v138 . f3d
Opening 2-1-100 Full Shell STRUCTURE
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\2-1-100 Full Shell STRUCTURE_v138.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\2-1-100 Full Shell STRUCTURE_v138.step
Closing 2-1-100 Full Shell STRUCTURE
Visiting folder Archive
Visiting file ARCHIVE C172 Panel BASIC Sketch v7 . f3d
Opening ARCHIVE C172 Panel BASIC Sketch
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\ARCHIVE C172 Panel BASIC Sketch_v7.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\ARCHIVE C172 Panel BASIC Sketch_v7.step
Closing ARCHIVE C172 Panel BASIC Sketch
Visiting file also archive G1000 C172 Panel BASIC Sketch v21 . f3d
filename *also archive* G1000 C172 Panel BASIC Sketch contained bad chars, replacing by also archive G1000 C172 Panel BASIC Sketch
Opening *also archive* G1000 C172 Panel BASIC Sketch
Traceback (most recent call last):
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 218, in visit_file
counter += export_file(ctx, format, file, doc)
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 182, in export_file
options = em.createFusionArchiveExportOptions(str(output_path))
File "C:/Users/Trevor/AppData/Local/Autodesk/webdeploy/production/97f9b2cd7bcb11d89be9f43364b3bb92648fda4b/Api/Python/packages\adsk\fusion.py", line 16876, in createFusionArchiveExportOptions
return _fusion.ExportManager_createFusionArchiveExportOptions(self, *args)
RuntimeError: 3 : The file name is not valid.

filename *also archive* G1000 C172 Panel BASIC Sketch contained bad chars, replacing by also archive G1000 C172 Panel BASIC Sketch
Traceback (most recent call last):
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 218, in visit_file
counter += export_file(ctx, format, file, doc)
File "C:/Users/Trevor/Documents/Fusion360Exporter-master/Fusion360Exporter-master/Exporter.py", line 186, in export_file
options = em.createSTEPExportOptions(str(output_path))
File "C:/Users/Trevor/AppData/Local/Autodesk/webdeploy/production/97f9b2cd7bcb11d89be9f43364b3bb92648fda4b/Api/Python/packages\adsk\fusion.py", line 16837, in createSTEPExportOptions
return _fusion.ExportManager_createSTEPExportOptions(self, *args)
RuntimeError: 3 : The file name is not valid.

Closing also archive G1000 C172 Panel BASIC Sketch
Visiting file ARCHIVE 2-1-700 G1000 SIMPLE v2 . f3d
Opening ARCHIVE 2-1-700 G1000 SIMPLE
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\ARCHIVE 2-1-700 G1000 SIMPLE_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\ARCHIVE 2-1-700 G1000 SIMPLE_v2.step
Closing ARCHIVE 2-1-700 G1000 SIMPLE
Visiting file 2-1-000 Full Shell ASSEMBLY v13 . f3d
Opening 2-1-000 Full Shell ASSEMBLY
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\2-1-000 Full Shell ASSEMBLY_v13.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\2-1-000 Full Shell ASSEMBLY_v13.step
Closing 2-1-000 Full Shell ASSEMBLY
Visiting file FORMER Version 2-1-200 Analog Instrument Panel v11 . f3d
Opening FORMER Version 2-1-200 Analog Instrument Panel
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\FORMER Version 2-1-200 Analog Instrument Panel_v11.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\FORMER Version 2-1-200 Analog Instrument Panel_v11.step
Closing FORMER Version 2-1-200 Analog Instrument Panel
Visiting file Older 2-1-100 Full Shell Drawing v1 . f2d
file Older 2-1-100 Full Shell Drawing has extension f2d which is not currently handled, skipping
Visiting file ARCHIVE 2-1-300 G1000 Instrument Panel v5 . f3d
Opening ARCHIVE 2-1-300 G1000 Instrument Panel
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\ARCHIVE 2-1-300 G1000 Instrument Panel_v5.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-1 Shell\Archive\ARCHIVE 2-1-300 G1000 Instrument Panel_v5.step
Closing ARCHIVE 2-1-300 G1000 Instrument Panel
Visiting folder 2-3 Yoke Assembly
Visiting file 2-3-001 Cessna Yoke Grommet v2 . f3d
Opening 2-3-001 Cessna Yoke Grommet
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\2-3-001 Cessna Yoke Grommet_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\2-3-001 Cessna Yoke Grommet_v2.step
Closing 2-3-001 Cessna Yoke Grommet
Visiting file 2-3-001 Cessna Yoke Grommet Drawing v1 . f2d
file 2-3-001 Cessna Yoke Grommet Drawing has extension f2d which is not currently handled, skipping
Visiting file Cessna Early Style Yoke v2 . f3d
Opening Cessna Early Style Yoke
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\Cessna Early Style Yoke_v2.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\Cessna Early Style Yoke_v2.step
Closing Cessna Early Style Yoke
Visiting file STL c152+yoke+back v1 . f3d
Opening STL c152+yoke+back
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\STL c152+yoke+back_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\STL c152+yoke+back_v1.step
Closing STL c152+yoke+back
Visiting file STL c152+yoke+front+with+logo v1 . f3d
Opening STL c152+yoke+front+with+logo
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\STL c152+yoke+front+with+logo_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\STL c152+yoke+front+with+logo_v1.step
Closing STL c152+yoke+front+with+logo
Visiting file Yoke Assembly v83 . f3d
Opening Yoke Assembly
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\Yoke Assembly_v83.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2\2-3 Yoke Assembly\Yoke Assembly_v83.step
Closing Yoke Assembly
Visiting file Yoke Assembly Drawing v5 . f2d
file Yoke Assembly Drawing has extension f2d which is not currently handled, skipping
Visiting folder Section 2A
Visiting file 2A-0-000 v3 . f3d
Opening 2A-0-000
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\2A-0-000_v3.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\2A-0-000_v3.step
Closing 2A-0-000
Visiting file 2A-1-000 Panel v46 . f3d
Opening 2A-1-000 Panel
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\2A-1-000 Panel_v46.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\2A-1-000 Panel_v46.step
Closing 2A-1-000 Panel
Visiting file 2A-3-000 Switch Panel Assy v24 . f3d
Opening 2A-3-000 Switch Panel Assy
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\2A-3-000 Switch Panel Assy_v24.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\2A-3-000 Switch Panel Assy_v24.step
Closing 2A-3-000 Switch Panel Assy
Visiting file 2A-1-000 Panel Drawing v2 . f2d
file 2A-1-000 Panel Drawing has extension f2d which is not currently handled, skipping
Visiting file Large Solenoid CB v17 . f3d
Opening Large Solenoid CB
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\Large Solenoid CB_v17.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2A\Large Solenoid CB_v17.step
Closing Large Solenoid CB
Visiting file Switch Panel Assy Drawing v7 . f2d
file Switch Panel Assy Drawing has extension f2d which is not currently handled, skipping
Visiting folder 2A-0
Visiting folder Section 2G
Visiting file 2G Panel FSM v9 . f3d
Opening 2G Panel FSM
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2G\2G Panel FSM_v9.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2G\2G Panel FSM_v9.step
Closing 2G Panel FSM
Visiting file 2G Panel NONFSM v1 . f3d
Opening 2G Panel NONFSM
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2G\2G Panel NONFSM_v1.f3d
Saved C:\Users\Trevor\Desktop\Fusion360Export\Cessna 172 Project Version 3\Section 2G\2G Panel NONFSM_v1.step
Closing 2G Panel NONFSM
Visiting folder Section 3
Visiting folder Section 4
`

Computer CAD 1-5-000

Make a Computer model for 1-5-000

Fix Stringer Holes 1-1-103 at 3 o clock

1-1-103 Rib Sliver at 3 o clock

Panel Bunny Ears 2A

Fix the bunny ears

Need to upload new CAD Drawings

Heating concerns about putting PC in Section 1

Hot hot, hey you got it. Hot hot, oo you got it.
Hot chocolate.
PC might overheat if kept in small area, which is stupid because I spent so much of my money on a Flight Sim Computer

Airtable

Airtable Record

Airtable

Airtable Record

Stringers are shown at 45 degree angles, not 90 degree angles as they should

Acceptable:

Unacceptable:

Flap Cutout add to main panel support and instrument panel

Screw in Secret Circuit Breaker

Yoke Issues

POSTPONED - [ ] Yoke Map holder needs to be figured out

Party that I wasn't invited to needs to be fixed

Right lip needs to have upper 2nd piece (to increase modularity)

Cessna Logo needs to be added:

The UnGrommet should be parametrized to the pipe diameter, but everything behind should be at ~1 inch.

DECIDED TO POSTPONE- [x] The actual yoke has a carve out making the yoke wiring accessible from the back (still need to decide though.

Recommend Projects

React

A declarative, efficient, and flexible JavaScript library for building user interfaces.
Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
TensorFlow

An Open Source Machine Learning Framework for Everyone
Django

The Web framework for perfectionists with deadlines.
Laravel

A PHP framework for web artisans
D3

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
web

Some thing interesting about web. New door for the world.
server

A server is a program made to process requests and deliver data to clients.
Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Visualization

Some thing interesting about visualization, use data art
Game

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft

Open source projects and samples from Microsoft.
Google

Google ❤️ Open Source for everyone.
Alibaba

Alibaba Open Source for everyone
D3

Data-Driven Documents codes.
Tencent

China tencent open source team.

captainbobsim / the-cessna-172-project-v3 Goto Github PK

the-cessna-172-project-v3's Introduction

The-Cessna-172-Project-V3

👉Watch the Build Videos Here

💗Support development of the project on Patreon! or PayPal!

Table of Contents:

Copyright

Spreadsheet

Issues:

Why?

Special Thanks:

the-cessna-172-project-v3's People

Contributors

Stargazers

Watchers

Forkers

the-cessna-172-project-v3's Issues

Recommend Projects

Recommend Topics

Recommend Org