bonuscloud / bonuscloud-node Goto Github PK

View Code? Open in Web Editor NEW

85.0 14.0 32.0 305.31 MB

Home Page: https://bonuscloud.io/

Shell 83.68% HTML 0.01% Classic ASP 16.32%

bonuscloud-node's Introduction

Device Support List Of Lite Node：https://bonuscloud.gitbook.io/help/device-support-list-of-lite-node

BonusCloud-Node

Routers

ARM v8

https://github.com/BonusCloud/BonusCloud-Node/blob/master/aarch64-merlin

Arm v8 Lite Node Running in Merlin with koolshare.

Suggest for Koolshare merlin(374.6) with jffs enabled.

ARM v7

https://github.com/BonusCloud/BonusCloud-Node/blob/master/aarch32-merlin

Arm v7 Lite Node running in Merlin with koolshare.

Suggest for koolshare merlin(380.69-X7.8) with jffs enabled.

SBC

PHICOMM N1

https://github.com/BonusCloud/BonusCloud-Node/tree/master/aarch64-N1

Running in Ubuntu (Armbian).

The recommended mirror file is：Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img.xz

RaspberryPi (32-bit)

https://github.com/BonusCloud/BonusCloud-Node/tree/master/aarch32-pi

NanoPi（64-bit）

https://github.com/BonusCloud/BonusCloud-Node/tree/master/aarch64-pi

Community contributors：

宁（qh szl）https://github.com/qinghon

Betterman（Allen Key） https://github.com/bettermanbao For PHICOMM K2 and PHICOMM N1

枫 https://github.com/haibochu For Openwrt and Lede with MIPS and ARM

Hikaru Chang https://github.com/hikaruchang For Openwrt with ARM and MIPS

404404 https://github.com/404404

bonuscloud-node's People

Contributors

Stargazers

Watchers

Forkers

qinghon leymx bettermanbao fomosats hikaruchang cjeruen wqf8057 huah6571 g3ne netgb visense catchfishday jifei881121 psymonli ysblack j1091353830 404404 0xgoerlimainnet gs-seven

bonuscloud-node's Issues

华硕AC86U安装Bonuscloud插件后无法使用

安装 BonusCloud-Node/aarch64-merlin/bxc.tar.gz 后，出现如下画面，没有输入账号的地方。输入码后提示格式不正确

J

bnb12ygw53qzh255ujrhc4l8rrp3mrf9g6rmmrr54r (Id. adicional: 0252369010898357)

aarch64 安装程序报错

n1的Armbian安装脚本
https://github.com/BonusCloud/BonusCloud-Node/tree/master/aarch64

在执行过程中获取 bxc_k8s_gcr_io/kube-proxy-arm 这个docker image时候失败

其中获取image时候可以看到多次从registry.cn-beijing.aliyuncs.com 下载，但是下载后继续不停的retry。retry多次之后unexpected EOF就失败了。

下面部分是获取docker images时候的输出

tmp/screenfetch     100%[===================>] 232.28K   827KB/s    in 0.3s
2019-05-21 09:43:06 URL:https://raw.githubusercontent.com/KittyKatt/screenFetch/master/screenfetch-dev [237855/237855] -> "tmp/screenfetch" [1]
arm-3.1: Pulling from bxc_k8s_gcr_io/pause
Digest: sha256:2aac966ece8906a535395f92bb25f0e8e21dac737df75b381e8f9bdd3ed56528
Status: Image is up to date for registry.cn-beijing.aliyuncs.com/bxc_k8s_gcr_io/pause:arm-3.1
v1.12.3: Pulling from bxc_k8s_gcr_io/kube-proxy-arm
dbaf9e16cce7: Retrying in 4 seconds
200178290a02: Downloading [==================================================>]  695.3kB/695.3kB
cca434ab6f3d: Downloading [==================================================>]  12.23MB/12.23MB
unexpected EOF

下面部分是安装脚本的完整输出

Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'apt' instead of 'apt-transport-https'
curl is already the newest version (7.58.0-2ubuntu3.6).
wget is already the newest version (1.19.4-1ubuntu2.2).
apt is already the newest version (1.6.10).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
tmp/screenfetch     100%[===================>] 232.28K   827KB/s    in 0.3s
2019-05-21 09:43:06 URL:https://raw.githubusercontent.com/KittyKatt/screenFetch/master/screenfetch-dev [237855/237855] -> "tmp/screenfetch" [1]
arm-3.1: Pulling from bxc_k8s_gcr_io/pause
Digest: sha256:2aac966ece8906a535395f92bb25f0e8e21dac737df75b381e8f9bdd3ed56528
Status: Image is up to date for registry.cn-beijing.aliyuncs.com/bxc_k8s_gcr_io/pause:arm-3.1
v1.12.3: Pulling from bxc_k8s_gcr_io/kube-proxy-arm
dbaf9e16cce7: Retrying in 4 seconds
200178290a02: Downloading [==================================================>]  695.3kB/695.3kB
cca434ab6f3d: Downloading [==================================================>]  12.23MB/12.23MB
unexpected EOF
Error response from daemon: No such image: registry.cn-beijing.aliyuncs.com/bxc_k8s_gcr_io/kube-proxy-arm:v1.12.3
vm.swappiness = 0
net.ipv6.conf.default.forwarding = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
sysctl: cannot stat /proc/sys/net/ipv6/conf/tun0/mtu: No such file or directory
net.ipv4.tcp_congestion_control = bbr
net.ipv4.ip_forward = 1
/opt/bcloud/compute/10-mynet.conflist                        100%[============================================================================================================================================>]     427  --.-KB/s    in 0.006s
2019-05-21 09:45:59 URL:https://raw.githubusercontent.com/BonusCloud/BonusCloud-Node/master/aarch64/res/compute/10-mynet.conflist [427/427] -> "/opt/bcloud/compute/10-mynet.conflist" [1]
/opt/bcloud/compute/99-loopback.conf                         100%[============================================================================================================================================>]      54  --.-KB/s    in 0.001s
2019-05-21 09:46:03 URL:https://raw.githubusercontent.com/BonusCloud/BonusCloud-Node/master/aarch64/res/compute/99-loopback.conf [54/54] -> "/opt/bcloud/compute/99-loopback.conf" [1]
tmp/info.txt                                                 100%[============================================================================================================================================>]     238  --.-KB/s    in 0.001s
2019-05-21 09:46:06 URL:https://raw.githubusercontent.com/BonusCloud/BonusCloud-Node/master/img-modules/info.txt [238/238] -> "tmp/info.txt" [1]
tmp/bxc-node_aarch64                                         100%[============================================================================================================================================>]  15.31M  1.74MB/s    in 8.9s
2019-05-21 09:46:17 URL:https://raw.githubusercontent.com/BonusCloud/BonusCloud-Node/master/img-modules/bxc-node_aarch64 [16049533/16049533] -> "tmp/bxc-node_aarch64" [1]
Would you like to install salt-minion for remote debugging by developers?
If not, the program has problems, you need to solve all the problems you encounter
您是否愿意安装salt-minion ，供开发人员远程调试.
如果否，程序出了问题，您需要自己解决所有遇到的问题，默认YES
[Default YES/N]:yes
cat: /proc/device-tree/model: No such file or directory
sed: can't read /etc/rc.local: No such file or directory
sed: can't read /etc/rc.local: No such file or directory

aarch32-merlin在AM380-x7.9.1下无法正常工作

过期问题

Does the node support x86_64 architecture?

I run it on my router with CPU D525 and OpenWRT x86_64, could the node work?

Yk

address,privatekey
0xecd1119a4743ae82e5f1b2d4e6ae6058d9baba17,d43141b6da8b39414d24c95a41260b9c8cdcd81f8134dbe6748ceebc4ad87b28

armbian armv7 安装salt报错

ERROR: Support for armhf packages at repo.saltstack.com is limited to Debian/Raspbian 8 platforms.
ERROR: You can try git installation mode, i.e.: sh bootstrap-salt.sh git v2017.7.2.
ERROR: It may be necessary to use git installation mode with pip and disable the SaltStack apt repository.
ERROR: For example:
ERROR: sh bootstrap-salt.sh -r -P git v2017.7.2
ERROR: Failed to run install_ubuntu_stable_deps()!!!

/install.sh: line 362: warning: command substitution: ignored null byte in input
生成配置文件id为_
saltconfig() {
sed -i "/^id:/d" /etc/salt/minion
echo "id: _" >> /etc/salt/minion
/etc/init.d/salt-minion restart > /dev/null 2>&1
}

arm V8

TEST

centos vps 服务器快到期了,dorker模式下【IP属于同一地区会有一些变动】

备份dorker，然后恢复该dorker 可以换到其他机器上运行么。

aarch32安装脚本有bug

n1 bxc-worker glibc2.27

感谢B大的一健安装程序
./bxc-worker: /lib/aarch64-linux-gnu/libc.so.6: version `GLIBC_2.27' not found (required by ./bxc-worker)

:/data/bxc# ./bxc.sh start
bxc-network: Start bxc-network
Thu Oct 18 18:50:09 2018 WARNING: file '/opt/bcloud/client.key' is group or others accessible
Thu Oct 18 18:50:09 2018
bxc-worker: Start bxc-worker
bxc-worker: /lib/aarch64-linux-gnu/libc.so.6: version `GLIBC_2.27' not found (required by bxc-worker)
bxc-node: node info has not changed: 0.2.2-4n#aarch64#4#1857948kB

装不上glibc2.27,,能做下兼容吗？

:/data/bxc# strings /lib/aarch64-linux-gnu/libc.so.6 |grep GLIBC_
GLIBC_2.17
GLIBC_2.18
GLIBC_2.22
GLIBC_2.23
GLIBC_2.24
GLIBC_PRIVATE

opkg install liblzo bug？

正常安装，提示如下，修改网络环境，重新安装OPKG都无法解决，请再看看

【2018年10月29日 15:02:18】: ====================== step 1 ===========================
【2018年10月29日 15:02:18】: 开启软件离线安装！
【2018年10月29日 15:02:19】: /tmp/upload目录下检测到上传的离线安装包bx.tar.gz
【2018年10月29日 15:02:20】: 尝试解压离线安装包离线安装包
【2018年10月29日 15:02:21】: 解压完成！
【2018年10月29日 15:02:23】: 准备安装bxc插件！
【2018年10月29日 15:02:23】: 找到安装脚本！
【2018年10月29日 15:02:23】: 运行安装脚本...
【2018年10月29日 15:02:23】: ====================== step 2 ===========================
【2018年10月29日 15:02:24】: 固件平台【koolshare merlin aarch64】符合安装要求，开始安装插件！
【2018年10月29日 15:02:24】: 校验安装包...
【2018年10月29日 15:02:24】: 未检测到包文件/tmp/bxc.tar.gz，跳过校验
【2018年10月29日 15:02:24】: 设备MAC地址为：XXXXXXX
【2018年10月29日 15:02:24】: 设备koolshare目录检测通过，开始复制文件...
【2018年10月29日 15:02:27】: 设备中未检测到邀请码，运行时需要先绑定设备。
【2018年10月29日 15:02:27】: 设置环境变量...
【2018年10月29日 15:02:27】: 安装版本信息：0.2.2
【2018年10月29日 15:02:27】: 安装依赖环境...
【2018年10月29日 15:02:29】: 系统中已安装opkg，并且更新信息成功！
【2018年10月29日 15:02:29】: opkg安装liblzo...
【2018年10月29日 15:02:30】: 安装liblzo失败，退出安装！
【2018年10月29日 15:02:30】: 您可以在命令行执行：opkg install liblzo ，手动验证安装
【2018年10月29日 15:02:30】: 因为bxc插件安装失败！退出离线安装！

Yy

CJ-861126816