The Yum cookbook exposes the yum_globalconfig
and yum_repository
resources that allows a user to both control global behavior and make individual Yum repositories available for use. These resources aim to allow the user to configure all options listed in the yum.conf
man page, found at http://linux.die.net/man/5/yum.conf
- RHEL/CentOS and derivatives
- Fedora
- Chef 11+
- none
This resource manages a yum repository configuration file at /etc/yum.repos.d/repositoryid
.repo. When the file needs to be repaired, it calls yum-makecache so packages in the repo become available to the next resource.
# add the Zenoss repository
yum_repository 'zenoss' do
description "Zenoss Stable repo"
baseurl "http://dev.zenoss.com/yum/stable/"
gpgkey 'http://dev.zenoss.com/yum/RPM-GPG-KEY-zenoss'
action :create
end
# add some internal company repo
yum_repository 'OurCo' do
description 'OurCo yum repository'
mirrorlist 'http://artifacts.ourco.org/mirrorlist?repo=ourco-6&arch=$basearch'
gpgkey 'http://artifacts.ourco.org/pub/yum/RPM-GPG-KEY-OURCO-6'
action :create
end
# delete CentOS-Media repo
yum_repository 'CentOS-Media' do
action :delete
end
:create
- creates a repository file and builds the repository listing:delete
- deletes the repository file:makecache
- update yum cache
baseurl
- Must be a URL to the directory where the yum repository's 'repodata' directory lives. Can be an http://, ftp:// or file:// URL. You can specify multiple URLs in one baseurl statement.cost
- relative cost of accessing this repository. Useful for weighing one repo's packages as greater/less than any other. defaults to 1000clean_metadata
- Run "yum clean metadata " during repository creation. defaults to true.description
- Maps to the 'name' parameter in a repository .conf. Descriptive name for the repository channel. This directive must be specified.enabled
- Eithertrue
orfalse
. This tells yum whether or not use this repository.enablegroups
- Eithertrue
orfalse
. Determines whether yum will allow the use of package groups for this repository. Default istrue
(package groups are allowed).exclude
- List of packages to exclude from updates or installs. This should be a space separated list in a single string. Shell globs using wildcards (eg. * and ?) are allowed.failovermethod
- Either 'roundrobin' or 'priority'.fastestmirror_enabled
- Eithertrue
orfalse
gpgcheck
- Eithertrue
orfalse
. This tells yum whether or not it should perform a GPG signature check on packages. When this is set in the [main] section it sets the default for all repositories. The default istrue
.gpgkey
- A URL pointing to the ASCII-armored GPG key file for the repository. This option is used if yum needs a public key to verify a package and the required key hasn't been imported into the RPM database. If this option is set, yum will automatically import the key from the specified URL.http_caching
- Either 'all', 'packages', or 'none'. Determines how upstream HTTP caches are instructed to handle any HTTP downloads that Yum does. Defaults to 'all'includepkgs
- Inverse of exclude. This is a list of packages you want to use from a repository. If this option lists only one package then that is all yum will ever see from the repository. Defaults to an empty list.keepalive
- Eithertrue
orfalse
. This tells yum whether or not HTTP/1.1 keepalive should be used with this repository.make_cache
- Optional, Default istrue
, iffalse
thenyum -q makecache
will not be ranmax_retries
- Set the number of times any attempt to retrieve a file should retry before returning an error. Setting this to '0' makes yum try forever. Default is '10'.metadata_expire
- Time (in seconds) after which the metadata will expire. So that if the current metadata downloaded is less than this many seconds old then yum will not update the metadata against the repository. If you find that yum is not downloading information on updates as often as you would like lower the value of this option. You can also change from the default of using seconds to using days, hours or minutes by appending a d, h or m respectively. The default is 6 hours, to compliment yum-updatesd running once an hour. It's also possible to use the word "never", meaning that the metadata will never expire. Note that when using a metalink file the metalink must always be newer than the metadata for the repository, due to the validation, so this timeout also applies to the metalink file.mirrorlist
- Specifies a URL to a file containing a list of baseurls. This can be used instead of or with the baseurl option. Substitution variables, described below, can be used with this option. As a special hack is the mirrorlist URL contains the word "metalink" then the value of mirrorlist is copied to metalink (if metalink is not set)mirror_expire
- Time (in seconds) after which the mirrorlist locally cached will expire. If the current mirrorlist is less than this many seconds old then yum will not download another copy of the mirrorlist, it has the same extra format as metadata_expire. If you find that yum is not downloading the mirrorlists as often as you would like lower the value of this option.mirrorlist_expire
- alias for mirror_expiremode
- Permissions mode of .repo file on disk. Useful for scenarios where secrets are in the repo file. If set to '600', normal users will not be able to use yum search, yum info, etc. Defaults to '0644'priority
- When the yum-priorities plug-in is enabled, you set priorities on repository entries, where N is an integer from 1 to 99. The default priority for repositories is 99.proxy
- URL to the proxy server that yum should use.proxy_username
- username to use for proxyproxy_password
- password for this proxyreport_instanceid
- Report instance ID when using Amazon Linux AMIs and repositoriesrepositoryid
- Must be a unique name for each repository, one word. Defaults to name attribute.sensitive
- Optional, Default isfalse
, iftrue
then content of repository file is hidden from chef run output.source
- Use a custom template source instead of the default one in the yum cookbooksslcacert
- Path to the directory containing the databases of the certificate authorities yum should use to verify SSL certificates. Defaults to none - uses system defaultsslclientcert
- Path to the SSL client certificate yum should use to connect to repos/remote sites Defaults to none.sslclientkey
- Path to the SSL client key yum should use to connect to repos/remote sites Defaults to none.sslverify
- Eithertrue
orfalse
. Determines if yum will verify SSL certificates/hosts. Defaults totrue
timeout
- Number of seconds to wait for a connection before timing out. Defaults to 30 seconds. This may be too short of a time for extremely overloaded sites.
This renders a template with global yum configuration parameters. The default recipe uses it to render /etc/yum.conf
. It is flexible enough to be used in other scenarios, such as building RPMs in isolation by modifying installroot
.
yum_globalconfig '/my/chroot/etc/yum.conf' do
cachedir '/my/chroot/etc/yum.conf'
keepcache 'yes'
debuglevel '2'
installroot '/my/chroot'
action :create
end
yum_globalconfig
can take most of the same parameters as a yum_repository
, plus more, too numerous to describe here. Below are a few of the more commonly used ones. For a complete list, please consult the yum.conf
man page, found here: http://linux.die.net/man/5/yum.conf
cachedir
- Directory where yum should store its cache and db files. The default is '/var/cache/yum'.keepcache
- Eithertrue
orfalse
. Determines whether or not yum keeps the cache of headers and packages after successful installation. Default isfalse
debuglevel
- Debug message output level. Practical range is 0-10. Default is '2'.exclude
- List of packages to exclude from updates or installs. This should be a space separated list. Shell globs using wildcards (eg. * and ?) are allowed.installonlypkgs
= List of package provides that should only ever be installed, never updated. Kernels in particular fall into this category. Defaults to kernel, kernel-bigmem, kernel-enterprise, kernel-smp, kernel-debug, kernel-unsupported, kernel-source, kernel-devel, kernel-PAE, kernel-PAE-debug.logfile
- Full directory and file name for where yum should write its log file.exactarch
- Eithertrue
orfalse
. Set totrue
to make 'yum update' only update the architectures of packages that you have installed. ie: with this enabled yum will not install an i686 package to update an x86_64 package. Default istrue
gpgcheck
- Eithertrue
orfalse
. This tells yum whether or not it should perform a GPG signature check on the packages gotten from this repository.
default
- Configuresyum_globalconfig[/etc/yum.conf]
with values found in node attributes atnode['yum']['main']
dnf_yum_compat
- Installs the yum package using dnf on Fedora systems to provide support for the package resource in recipes. This is necessary as Chef does not yet (as of Q4 2015) have native support for DNF. This recipe should be 1st on a Fedora runlist
The following attributes are set by default
default['yum']['main']['cachedir'] = '/var/cache/yum/$basearch/$releasever'
default['yum']['main']['keepcache'] = false
default['yum']['main']['debuglevel'] = nil
default['yum']['main']['exclude'] = nil
default['yum']['main']['logfile'] = '/var/log/yum.log'
default['yum']['main']['exactarch'] = nil
default['yum']['main']['obsoletes'] = nil
default['yum']['main']['installonly_limit'] = nil
default['yum']['main']['installonlypkgs'] = nil
default['yum']['main']['installroot'] = nil
For Amazon platform nodes,
default['yum']['main']['releasever'] = 'latest'
Recipes from older versions of this cookbook have been moved individual cookbooks. Recipes for managing platform yum configurations and installing specific repositories can be found in one (or more!) of the following cookbook.
- yum-centos
- yum-fedora
- yum-amazon
- yum-epel
- yum-elrepo
- yum-repoforge
- yum-ius
- yum-percona
- yum-pgdg
Put depends 'yum'
in your metadata.rb to gain access to the yum_repository resource.
- Author:: Eric G. Wolfe
- Author:: Matt Ray ([email protected])
- Author:: Joshua Timberman ([email protected])
- Author:: Sean OMeara ([email protected])
Copyright:: 2011 Eric G. Wolfe
Copyright:: 2013-2016 Chef Software, Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.