Tini is the simplest init you could think of.

All Tini does is spawn a single child (Tini is meant to be run in a container), and wait for it to exit all the while reaping zombies and performing signal forwarding.

NOTE: There are pre-built Docker images available for Tini. If you're currently using an Ubuntu or CentOS image as your base, you can use one of those as a drop-in replacement.

NOTE: There are Tini packages for Alpine Linux and NixOS. See below for installation instructions.

Add Tini to your container, and make it executable. Then, just invoke Tini and pass your program and its arguments as arguments to Tini.

In Docker, you will want to use an entrypoint so you don't have to remember to manually invoke Tini:

# Add Tini
ENV TINI_VERSION v0.13.2
ADD https://github.com/krallin/tini/releases/download/${TINI_VERSION}/tini /tini
RUN chmod +x /tini
ENTRYPOINT ["/tini", "--"]

# Run your program under Tini
CMD ["/your/program", "-and", "-its", "arguments"]
# or docker run your-image /your/program ...

Note that you can skip the -- under certain conditions, but you might as well always include it to be safe. If you see an error message that looks like tini: invalid option -- 'c', then you need to add the --.

Arguments for Tini itself should be passed like -v in the following example: /tini -v -- /your/program.

NOTE: The binary linked above is a 64-bit dynamically-linked binary.

The tini and tini-static binaries are signed using the key 595E85A6B1B4779EA4DAAEC70B588DFF0527A9B7.

You can verify their signatures using gpg (which you may install using your package manager):

ENV TINI_VERSION v0.13.2
ADD https://github.com/krallin/tini/releases/download/${TINI_VERSION}/tini /tini
ADD https://github.com/krallin/tini/releases/download/${TINI_VERSION}/tini.asc /tini.asc
RUN gpg --keyserver ha.pool.sks-keyservers.net --recv-keys 595E85A6B1B4779EA4DAAEC70B588DFF0527A9B7 \
 && gpg --verify /tini.asc

On Alpine Linux, you can use the following command to install Tini:

apk add --update tini
# Tini is now available at /sbin/tini

Using Nix, you can use the following command to install Tini:

nix-env --install tini

ARM images are available! Find the list of available platforms under the releases tab.

The -v argument can be used for extra verbose output (you can pass it up to 3 times, e.g. -vvv).

By default, Tini needs to run as PID 1 so that it can reap zombies (by running as PID 1, zombies get re-parented to Tini).

If for some reason, you cannot run Tini as PID 1, you should register Tini as a process subreaper instead (only in Linux >= 3.4), by either:

• Passing the -s argument to Tini (tini -s -- ...)
• Setting the environment variable TINI_SUBREAPER (e.g. export TINI_SUBREAPER=).

This will ensure that zombies get re-parented to Tini despite Tini not running as PID 1.

NOTE: Tini will issue a warning if it detects that it isn't running as PID 1 and isn't registered as a subreaper. If you don't see a warning, you're fine.

By default, Tini only kills its immediate child process. This can be inconvenient if sending a signal to that process does have the desired effect. For example, if you do

docker run krallin/ubuntu-tini sh -c 'sleep 10'

and ctrl-C it, nothing happens: SIGINT is sent to the 'sh' process, but that shell won't react to it while it is waiting for the 'sleep' to finish.

With the -g option, Tini kills the child process group , so that every process in the group gets the signal. This corresponds more closely to what happens when you do ctrl-C etc. in a terminal: The signal is sent to the foreground process group.

Tini can also be used with an existing entrypoint in your container!

Assuming your entrypoint was /docker-entrypoint.sh, then you would use:

ENTRYPOINT ["/tini", "--", "/docker-entrypoint.sh"]

Tini has very few dependencies (it only depends on libc), but if your container fails to start, you might want to consider using the statically-built version instead:

ADD https://github.com/krallin/tini/releases/download/${TINI_VERSION}/tini-static /tini

Tini is a very small file (in the 10KB range), so it doesn't add much weight to your container.

The statically-linked version is bigger, but still < 1M.

If you'd rather not download the binary, you can build Tini by running cmake . && make.

Before building, you probably also want to run:

export CFLAGS="-DPR_SET_CHILD_SUBREAPER=36 -DPR_GET_CHILD_SUBREAPER=37"

This ensure that even if you're building on a system that has old Linux Kernel headers (< 3.4), Tini will be built with child subreaper support. This is usually what you want if you're going to use Tini with Docker (if your host Kernel supports Docker, it should also support child subreapers).

After spawning your process, Tini will wait for signals and forward those to the child process, and periodically reap zombie processes that may be created within your container.

When the "first" child process exits (/your/program in the examples above), Tini exits as well, with the exit code of the child process (so you can check your container's exit code to know whether the child exited successfully).

If something isn't working just like you expect, consider increasing the verbosity level (up to 3):

tini -v    -- bash -c 'exit 1'
tini -vv   -- true
tini -vvv  -- pwd

Maintainer:

• Thomas Orozco

Contributors:

• Tianon Gravi
• David Wragg
• Michael Crosby
• Wyatt Preul

Special thanks to:

• Danilo Bürger for packaging Tini for Alpine
• Asko Soukka for packaging Tini for Nix