beagleboard / linux Goto Github PK
View Code? Open in Web Editor NEWThe official Read Only BeagleBoard and BeagleBone kernel repository https://git.beagleboard.org/beagleboard/linux
Home Page: http://beagleboard.org/source
License: Other
linux's Introduction
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
linux's People
Stargazers
Watchers
Forkers
rozzied maurillo71 jadonk priyansmurarka yixiaoyang kimjd7 pwielders ankurtank accumulator joaopedrotaveira a-san1214 vs3 cdsteinkuehler jcreekmore jlcox1970 kyllikki emercs kamejoko80 lc7cl stefanct ft-liang xczhanjun incas3 yung-chang-chiu synapse-wireless-labs jameshyunkim byterhit twam ziaagikian antboard kkwekkeboom lebronfaling avr92 lucyking marshall andrewlee97 esvitech shel cooltouya artur321 signal11 cj456 fritzprix hallry perrenialprick jaykothari zyswww davier dennis-musk rflownn ruisebastiao jiangmouren gshrikant gautamboddeda retrography erhanyilmaz sidkuma24 dss91 hmbedded qwertyssp lp9 mayurp85 sureshcore wimiguo raguprasanth adargel bobsomers bergst zeuzoix rajusr70 love4558 mbahar94 syntheticpp superkulpa fakufaku jmc8 suresh-personal shubhi1407 giapdangle jameshagerman yu1019594136 prathapnagaraj imcek tameralamiri hmchen1 jokepinocchio clue-technologies muthmano-dev tuyenth frutiemax wentasah xcage15 jemale zhkj2010 nimaim akrapovik ranpiggy suse110 efargas ewqasd200glinux's Issues
Uart RTS Not Working
For RS485, I've enabled the rts gpio on my uart using OS v4.1:
uart1: serial@48022000 {
compatible = "ti,omap-serial-rs485";
ti,hwmods = "uart2";
clock-frequency = <0x2dc6c00>;
reg = <0x48022000 0x2000>;
interrupts = <0x49>;
dmas = <&edma 0x1c &edma 0x1d>;
dma-names = "tx", "rx";
rs485-rts-active-high;
rs485-rts-delay = <0 0>;
rts-gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
gpio3 19 points to P9_27 which is my rts line as verified by a scope (and a working program on the 3.14 of the OS).
My serial driver does successfully find the gpio ("rts-gpio") however I get a kernel crash during boot up:
Running uname_boot ...
loading /boot/vmlinuz-4.1.13-ti-rt-r77 ...
[ 5.576334] kobject: 'omap_serial_rs485' (bf003550): kobject_add_internal: parent: 'module', set: 'module'
[ 5.576402] kobject: 'holders' (df555500): kobject_add_internal: parent: 'omap_serial_rs485', set: '<NULL>'
[ 5.576589] kobject: 'notes' (df58cc80): kobject_add_internal: parent: 'omap_serial_rs485', set: '<NULL>'
[ 5.576618] kobject: 'omap_serial_rs485' (bf003550): kobject_uevent_env
[ 5.576638] kobject: 'omap_serial_rs485' (bf003550): fill_kobj_path: path = '/module/omap_serial_rs485'
[ 5.585686] kobject: 'omap-serial-rs485' (df4efc80): kobject_add_internal: parent: 'drivers', set: 'drivers'
[ 5.586061] of_get_named_gpiod_flags: parsed 'rts-gpio' property of node '/ocp/serial@48022000[0]' - status (0)
[ 5.586085] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ae134
[ 5.586095] pgd = df5d4000
[ 5.586103] [fa1ae134] *pgd=48011452(bad)
[ 5.586128] Internal error: : 1028 [#1] PREEMPT SMP ARM
[ 5.586140] Modules linked in: omap_serial_rs485(+)
[ 5.586165] CPU: 0 PID: 174 Comm: modprobe Not tainted 4.1.13-ti-rt-r77 #262
[ 5.586174] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 5.586184] task: df5daac0 ti: df50a000 task.ti: df50a000
This code worked in OS 3.14 but not in 4.1. The biggest change, for this system, is the dts/dtsi files which I've tried to make sure were set up properly.
The crash occurs during the gpio_direction_output function call, see below..
.
.
.
if (omap_up_info->tx_enable_gpio = of_get_named_gpio(dev->of_node, "txe-gpio", 0))
{
gpio_direction_output(omap_up_info->tx_enable_gpio, PIN_HIGH);
.
.
.
By manipulating P9_27 (gpio 115) directly, the problem goes away and the software works as designed.
root@localhost:~# cd /sys/class/gpio/
root@localhost:/sys/class/gpio# echo 115 > export
root@localhost:/sys/class/gpio# cd gpio115
root@localhost:/sys/class/gpio/gpio115# ls
active_low device direction edge power subsystem uevent value
root@localhost:/sys/class/gpio/gpio115# cat value
0
root@localhost:/sys/class/gpio/gpio115# cat active_low
0
root@localhost:/sys/class/gpio/gpio115# ls
active_low device direction edge power subsystem uevent value
root@localhost:/sys/class/gpio/gpio115# cat direction
in
root@localhost:/sys/class/gpio/gpio115# echo "out" > direction
root@localhost:/sys/class/gpio/gpio115#
Note that the pin is already configured to be "out" yet the devicetree is reporting it set to "in".
BB-VIEW-LCD7
Latest kernel didn't seem to have the overlay in it for me. I thought we had support, but I'm guessing not. Let me know if I missed it somewhere.
I'm trying out a hack: a4b6aff
d0ce07ed09d393f76889e71192d30c185c9530a5 disappeared (rebased) from 4.1 branch?
Two weeks ago I managed to build 4.1 branch with the revision: d0ce07e
Now, this revision disappeared. Are rebases likely to happen on this fork? Or it was just an exception?
Regards,
Andrei
SPI: length of word only power of two
Hello,
Why it is not possible to use any word length? Lot of SPI modules are able to work with it.
https://github.com/beagleboard/linux/blob/master/drivers/spi/spi.c#L1859
Could someone propose some easy workaround how to use SPI with odd number of bits in word?
Startup anomalies
Just migrated from 4.1.13 to 4.1.17 and during boot, experiencing:
[ **](1 of 2) A start job is running for LSB: Raise netwo...33s / no limit)[ 38.430333] random: nonblocking pool is initialid
[ TIME ] Timed out waiting for device dev-ttyGS0.device.
[DEPEND] Dependency failed for Serial Getty on ttyGS0.
[ *] A start job is running for LSB: Raise network interf... 4s / no limit)[ 189.953893] net eth0: initializing cpsw version )
For some reason it is trying and failing to bring up ttyGS0.
Also, unable to set static IP even after setting the etc/network/interface file... keeps going to DHCP. This could be connected to the above problem.
Any ideas?
G_multi
How do you spawn the systemd process after g_multi loads?
androidboot.console=ttyO0 not working linux kernel 3.14
this is my uEnv.txt file. If I remove the androidboot.console=ttyO0 I see the serial output but if I leave it in it just says Starting Kernel... and nothing after that. Do I need to configure in linux kernel or dts file to allow the androidboot.console variable to work. Thanks!
kernel_file=zImage
console=ttyO0,115200n8
#video_res=video=720x480-16@60
mmcroot=/dev/mmcblk0p2 rw
mmcrootfstype=ext4 rootwait fixrtc
loadkernel=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${kernel_file}
loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /dtbs/${fdtfile}
boot_ftd=run loadkernel; run loadfdt
mmcargs=setenv bootargs consoleblank=0 androidboot.console=ttyO0 mem=512M acpi=noirq vt.global_cursor_default=0 mpurate=1000 ${video_res} qemu=1 console=${console} root=${mmcroot} rootfstype=${mmcrootfstype} init=/init ip=off g_ffs.idVendor=0x18d1 g_ffs.idProduct=0x4e23 g_ffs.iSerialNumber=BBBANDROID
uenvcmd=run boot_ftd; run mmcargs; bootz ${loadaddr} - ${fdtaddr}
usb_otg_register_gadget: device not registered to otg core
I enabled functionfs for linux kernel 3.14 but on startup I get this error message:
[ 6.626079] g_ffs gadget: g_ffs ready
[ 6.629822] musb-hdrc musb-hdrc.0.auto: otg: usb_otg_register_gadget: device not registered to otg core
Do you know what configuration for the kernel or dts file I need to solve this issue?
Branch 4.1 does not boot on BeagleBone Black
Last working tag is 4.1.17-ti-rt-r46. Tags 4.1.17-ti-rt-r47 and 4.1.17-ti-rt-r48 do not boot. The boot process freezes right after jumping to Linux, then resets (presumably a watchdog reset). This is the serial output:
U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)
U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build: jenkins-github_Bootloader-Builder-105
Watchdog enabled
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
reading uEnv.txt
1067 bytes read in 6 ms (172.9 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
cpsw Waiting for PHY auto negotiation to complete. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.46.120 (763 ms)
Checking if client_ip is set ...
using am335x-boneblack.dtb ...
gpio: pin 56 (gpio 56) value is 1
Running nfsboot ...
Booting from 192.168.46.2 ...
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.46.2; our IP address is 192.168.46.120
Filename 'zImage'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###############################
384.8 KiB/s
done
Bytes transferred = 7811736 (773298 hex)
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.46.2; our IP address is 192.168.46.120
Filename 'dtbs/am335x-boneblack.dtb'.
Load address: 0x88000000
Loading: ############
160.2 KiB/s
done
Bytes transferred = 60532 (ec74 hex)
Kernel image @ 0x82000000 [ 0x000000 - 0x773298 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Device Tree to 8ffee000, end 8ffffc73 ... OK
Starting kernel ...
U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)
Has something changed after r46? I am using TFTP to load the kernel and the DT.
Thanks in advance.
Unable to boot linux 4.1 on beagle bone black Rev C.
Hi,
I have compiled the Linux 4.1 from this repo. When I run it over beagle bone black (using tftp and nfs), Kernel stops @ "Starting Kernel..,".
And no further logs are seen.
Can you please help me.
Thanks,
[Branch 4.1] : tty spawning failed
Hello All,
I have tried compiling the BBB Linux version 4.1. I am able to boot the target successfully with the uImage and dtb.
But am not able to login into the console. Am not sure is there anything specific changes needed for tty spawning. The same RFS works fine with older version of the kernel.
I am getting the following message after few minutes ideal boot screen.
HEAD: 3c34b46
Log:
init Id O0 respawning too fast disabled for 5 minutes
Please help.
Thanks,
Parthiban N
compiling 3.8.13 fails at built-in.o
I'm trying to build the latest 3.8.13 kernel with netconsole enabled (that's the only change I made to the bb.org_defconfig).
The make fails with this error:
~/build/linux$ make ARCH=arm CROSS_COMPILE=${CC} O=/home/rain/build/kernelcompiled
Using /home/rain/build/linux as source for kernel
GEN /home/rain/build/kernelcompiled/Makefile
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
make[2]: include/generated/mach-types.h' is up to date. CALL /home/rain/build/linux/scripts/checksyscalls.sh CHK include/generated/compile.h LD arch/arm/kernel/built-in.o arch/arm/kernel/devtree.o: In functionearly_init_dt_add_memory_arch':
/home/rain/build/linux/include/linux/of.h:777: multiple definition of of_free_overlay_info' arch/arm/kernel/smp_twd.o:/home/rain/build/linux/include/linux/of.h:777: first defined here arch/arm/kernel/perf_event_cpu.o: In functionof_free_overlay_info':
/home/rain/build/linux/include/linux/of.h:777: multiple definition of of_free_overlay_info' arch/arm/kernel/smp_twd.o:/home/rain/build/linux/include/linux/of.h:777: first defined here arch/arm/kernel/topology.o: In functionof_free_overlay_info':
/home/rain/build/linux/include/linux/of.h:777: multiple definition of `of_free_overlay_info'
arch/arm/kernel/smp_twd.o:/home/rain/build/linux/include/linux/of.h:777: first defined here
make[2]: *** [arch/arm/kernel/built-in.o] Error 1
make[1]: *** [arch/arm/kernel] Error 2
make: *** [sub-make] Error 2
I'm using a fully updated Debian 7 with:
ii binutils 2.22-8 amd64
ii gcc 4:4.7.2-1 amd64
ii gcc-4.6-base:amd64 4.6.3-14 amd64
ii gcc-4.7 4.7.2-5 amd64
ii gcc-4.7-base:amd64 4.7.2-5 amd64
ii gcc-4.7-base:i386 4.7.2-5 i386
and the crosscompiler listed on this page:
https://eewiki.net/display/linuxonarm/BeagleBone+Black
Any idea on what the issue may be? Am I using the wrong version of one of the components?
Board will not completely powered off
With Kernel 3.14 a BeagleBoneBlack will not completely powered off,
wehen I use commands like 'poweroff' or 'shutdown -h now'.
With Kernel 3.8 this was possible ...
In Kernel 3.8 there was a function 'rtc_power_off' in 'rtc_omap.c'
with this function it was possible to power off the board after shutdown.
in all later Kernels this function is missing ...
What's happend to this function? Why it was removed?
How can I power off the board completely?
Random delay between bytes in UART driver
Tested in Kernel >= 3.8.13-boneXX and all debian 7.4, 7.8, 8.0, 8.1
The ACR122L Contactless Card Reader is crashing due random delay/jitter in synchronous UART writes.
Howto reproduce the bug:
int fd=open("/dev/ttyO2",......);
buffer[100];
memset(buffer,0xff,sizeof(buffer));
write(fd,buffer,sizeof(buffer));
The write must be atomic, but in oscilloscope is clear to see large random delay between bytes.
Large random delay means several milliseconds.
This bug is not present Angstrom Distribution (BeagleBone Black - 2GB eMMC) 2013-09-04.
am33xx.dtsi in kernels >=3.12 lacks CPU temperature sensor node
With kernel 3.8 CPU temperature sensor data is accessible via /sys/class/hwmon/ or using lm_sensors:
$ sensors
am335x-bandgap-isa-0000
Adapter: ISA adapter
temp1: +57.0°C
But this sensor is not accessible with kernels >=3.12 (well.. to be honest I tested only 3.14 :)) I guess this is because am33xx.dtsi in kernels >=3.12 lacks the following node:
bandgap@44e10448 {
compatible = "ti,am335x-bandgap";
reg = <0x44e10448 0x8>;
};
Could it be added to kernels >=3.12?
please sir help on how to enable gpio's for beagleboard Xm in new kernel.......
USB Driver Crash
Having an issue-- found it with both 3.14.58 and 4.1.15 so it must be systemic?
Hardware:
Beaglebone black with USB wireless (Novatel USB760).
I'm running a simple script that sends an "AT" to the modem, the modem responds with "OK". I print OK to the screen and repeat in a while() loop. That's it. Simple.
This script works just fine by after 300+ queries the USB driver crashes with the dump listed below. Note that I've run this on two versions and get the same results. It's intermittent, meaning unpredictable when it occurs but given enough time it will occur. I think there may be some kind of bug in the USB host driver? I've included my config file dump below the kernel dump below.
[ 3727.159459] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[ 3727.159505] Modules linked in: option usb_wwan usbserial usb_f_acm u_serial usb_f_ecm g_multi usb_f_mass_storage usb_f_rndis u_e6
[ 3727.159515] CPU: 0 PID: 718 Comm: bar.sh Not tainted 4.1.15-ti-rt-r48 #119
[ 3727.159518] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 3727.159523] task: dba3a700 ti: ddd40000 task.ti: ddd40000
[ 3727.159605] PC is at musb_urb_dequeue+0xb0/0x1a0 [musb_hdrc]
[ 3727.159625] LR is at musb_giveback+0x68/0xd8 [musb_hdrc]
[ 3727.159631] pc : [<bf0c4880>] lr : [<bf0c2f40>] psr: 600e0013
[ 3727.159631] sp : ddd41d58 ip : 00000000 fp : ddd41d8c
[ 3727.159634] r10: ddd88008 r9 : 00000001 r8 : 00000000
[ 3727.159638] r7 : 00000000 r6 : ddf92010 r5 : db825880 r4 : ddee4f00
[ 3727.159642] r3 : 00000000 r2 : dba3a700 r1 : 00000000 r0 : ddf92010
[ 3727.159648] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 3727.159652] Control: 10c5387d Table: 9dec0019 DAC: 00000015
[ 3727.159656] Process bar.sh (pid: 718, stack limit = 0xddd40218)
[ 3727.159660] Stack: (0xddd41d58 to 0xddd42000)
[ 3727.159667] 1d40: c0480600 c047f874
[ 3727.159674] 1d60: c0123594 c01003e8 ddee4f00 ddee4f00 ddd0d000 fffffffe ddd20ac0 00000000
[ 3727.159682] 1d80: ddd41dac ddd41d90 c047d9b8 bf0c47dc ddee4f00 fffffffe db986400 db986c00
[ 3727.159689] 1da0: ddd41dd4 ddd41db0 c047ec48 c047d990 00000000 dba3a700 00000000 ddee4f00
[ 3727.159697] 1dc0: ddee4f0c 0000000c ddd41e0c ddd41dd8 c04801d0 c047ebf8 00000000 ddd20aec
[ 3727.159704] 1de0: ddd41e0c ddd41df0 c047fb70 c00609e0 dba3a700 ddd20a80 ddfe7b00 0000000c
[ 3727.159711] 1e00: ddd41e34 ddd41e10 bf1eae68 c0480184 bf1eadb0 db986c04 db986cec dd92b400
[ 3727.159719] 1e20: 00000000 ddd88000 ddd41e44 ddd41e38 bf1c6028 bf1eadbc ddd41e64 ddd41e48
[ 3727.159726] 1e40: c03d9bac bf1c600c db986c04 dd92b400 db986c00 c093b708 ddd41e7c ddd41e68
[ 3727.159734] 1e60: c03da2e0 c03d9b24 dd92b400 ddd88000 ddd41e9c ddd41e80 bf1c6c40 c03da2c0
[ 3727.159741] 1e80: bf1c6c00 dd92b400 00000000 ddb34910 ddd41f24 ddd41ea0 c03d09bc bf1c6c0c
[ 3727.159748] 1ea0: 00000000 ddd40000 600e0013 00000000 ddd41f14 c00148e0 ddd41edc ddd41ec8
[ 3727.159756] 1ec0: c064bfb8 c064b564 db8ded70 c01352dc ddd41f5c ddd41ee0 c0014910 c064bf78
[ 3727.159763] 1ee0: 00000000 00000010 ddd880c0 ddd880c0 ddd88000 dc8ba30f ddb34910 ddd88000
[ 3727.159770] 1f00: db8ded70 ddb34910 dd37c5a0 00000010 00000000 ddd88008 ddd41f5c ddd41f28
[ 3727.159778] 1f20: c0135314 c03d089c 00000000 00000000 c09978fc dba3abc4 00000000 c09978fc
[ 3727.159785] 1f40: dba3a700 c0010584 ddd40000 00000000 ddd41f6c ddd41f60 c01354c0 c0135298
[ 3727.159792] 1f60: ddd41f8c ddd41f70 c0058a3c c01354bc ddd40000 c0010584 ddd41fb0 0000003f
[ 3727.159800] 1f80: ddd41fac ddd41f90 c00136cc c005898c dba3a700 00000006 003a8908 000c5758
[ 3727.159807] 1fa0: 00000000 ddd41fb0 c001042c c0013650 00000000 00000000 000000ff 00000000
[ 3727.159814] 1fc0: 00000006 003a8908 000c5758 0000003f 00000000 00000009 0000000a 003a7ea8
[ 3727.159821] 1fe0: 000c10f8 beb47f7c 00064a8f b6e693e6 400e0030 0000000a 00000000 00000000
[ 3727.159825] Backtrace:
[ 3727.159872] [<bf0c47d0>] (musb_urb_dequeue [musb_hdrc]) from [<c047d9b8>] (unlink1+0x34/0x118)
[ 3727.159884] r9:00000000 r8:ddd20ac0 r7:fffffffe r6:ddd0d000 r5:ddee4f00 r4:ddee4f00
[ 3727.159895] [<c047d984>] (unlink1) from [<c047ec48>] (usb_hcd_unlink_urb+0x5c/0xe0)
[ 3727.159904] r7:db986c00 r6:db986400 r5:fffffffe r4:ddee4f00
[ 3727.159913] [<c047ebec>] (usb_hcd_unlink_urb) from [<c04801d0>] (usb_kill_urb+0x58/0xd4)
[ 3727.159920] r6:0000000c r5:ddee4f0c r4:ddee4f00
[ 3727.159938] [<c0480178>] (usb_kill_urb) from [<bf1eae68>] (usb_wwan_close+0xb8/0x104 [usb_wwan])
[ 3727.159945] r6:0000000c r5:ddfe7b00 r4:ddd20a80
[ 3727.159987] [<bf1eadb0>] (usb_wwan_close [usb_wwan]) from [<bf1c6028>] (serial_port_shutdown+0x28/0x2c [usbserial])
[ 3727.159998] r8:ddd88000 r7:00000000 r6:dd92b400 r5:db986cec r4:db986c04 r3:bf1eadb0
[ 3727.160027] [<bf1c6000>] (serial_port_shutdown [usbserial]) from [<c03d9bac>] (tty_port_shutdown+0x94/0x98)
[ 3727.160037] [<c03d9b18>] (tty_port_shutdown) from [<c03da2e0>] (tty_port_close+0x2c/0x54)
[ 3727.160045] r7:c093b708 r6:db986c00 r5:dd92b400 r4:db986c04
[ 3727.160064] [<c03da2b4>] (tty_port_close) from [<bf1c6c40>] (serial_close+0x40/0x64 [usbserial])
[ 3727.160069] r5:ddd88000 r4:dd92b400
[ 3727.160085] [<bf1c6c00>] (serial_close [usbserial]) from [<c03d09bc>] (tty_release+0x12c/0x50c)
[ 3727.160093] r6:ddb34910 r5:00000000 r4:dd92b400 r3:bf1c6c00
[ 3727.160110] [<c03d0890>] (tty_release) from [<c0135314>] (__fput+0x88/0x1cc)
[ 3727.160121] r10:ddd88008 r9:00000000 r8:00000010 r7:dd37c5a0 r6:ddb34910 r5:db8ded70
[ 3727.160125] r4:ddd88000
[ 3727.160134] [<c013528c>] (__fput) from [<c01354c0>] (____fput+0x10/0x14)
[ 3727.160145] r10:00000000 r9:ddd40000 r8:c0010584 r7:dba3a700 r6:c09978fc r5:00000000
[ 3727.160148] r4:dba3abc4
[ 3727.160165] [<c01354b0>] (____fput) from [<c0058a3c>] (task_work_run+0xbc/0xec)
[ 3727.160184] [<c0058980>] (task_work_run) from [<c00136cc>] (do_work_pending+0x88/0xa8)
[ 3727.160193] r7:0000003f r6:ddd41fb0 r5:c0010584 r4:ddd40000
[ 3727.160202] [<c0013644>] (do_work_pending) from [<c001042c>] (work_pending+0xc/0x20)
[ 3727.160210] r6:000c5758 r5:003a8908 r4:00000006 r3:dba3a700
[ 3727.160219] Code: e1a00006 ebfff997 e5953000 e5c59025 (e5931010)
[ 3727.660022] ---[ end trace 0000000000000002 ]---
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159459] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159656] Process bar.sh (pid: 718, stack limit = 0xddd40218)
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159660] Stack: (0xddd41d58 to 0xddd42000)
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159667] 1d40: c0480600 c047f874
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159674] 1d60: c0123594 c01003e8 ddee4f00 ddee4f00 ddd0d000 fffffffe ddd20ac0 00000000
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159682] 1d80: ddd41dac ddd41d90 c047d9b8 bf0c47dc ddee4f00 fffffffe db986400 db986c00
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159689] 1da0: ddd41dd4 ddd41db0 c047ec48 c047d990 00000000 dba3a700 00000000 ddee4f00
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159697] 1dc0: ddee4f0c 0000000c ddd41e0c ddd41dd8 c04801d0 c047ebf8 00000000 ddd20aec
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159704] 1de0: ddd41e0c ddd41df0 c047fb70 c00609e0 dba3a700 ddd20a80 ddfe7b00 0000000c
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159711] 1e00: ddd41e34 ddd41e10 bf1eae68 c0480184 bf1eadb0 db986c04 db986cec dd92b400
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159719] 1e20: 00000000 ddd88000 ddd41e44 ddd41e38 bf1c6028 bf1eadbc ddd41e64 ddd41e48
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159726] 1e40: c03d9bac bf1c600c db986c04 dd92b400 db986c00 c093b708 ddd41e7c ddd41e68
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159734] 1e60: c03da2e0 c03d9b24 dd92b400 ddd88000 ddd41e9c ddd41e80 bf1c6c40 c03da2c0
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159741] 1e80: bf1c6c00 dd92b400 00000000 ddb34910 ddd41f24 ddd41ea0 c03d09bc bf1c6c0c
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159748] 1ea0: 00000000 ddd40000 600e0013 00000000 ddd41f14 c00148e0 ddd41edc ddd41ec8
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159756] 1ec0: c064bfb8 c064b564 db8ded70 c01352dc ddd41f5c ddd41ee0 c0014910 c064bf78
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159763] 1ee0: 00000000 00000010 ddd880c0 ddd880c0 ddd88000 dc8ba30f ddb34910 ddd88000
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159770] 1f00: db8ded70 ddb34910 dd37c5a0 00000010 00000000 ddd88008 ddd41f5c ddd41f28
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159778] 1f20: c0135314 c03d089c 00000000 00000000 c09978fc dba3abc4 00000000 c09978fc
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159785] 1f40: dba3a700 c0010584 ddd40000 00000000 ddd41f6c ddd41f60 c01354c0 c0135298
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159792] 1f60: ddd41f8c ddd41f70 c0058a3c c01354bc ddd40000 c0010584 ddd41fb0 0000003f
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159800] 1f80: ddd41fac ddd41f90 c00136cc c005898c dba3a700 00000006 003a8908 000c5758
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159807] 1fa0: 00000000 ddd41fb0 c001042c c0013650 00000000 00000000 000000ff 00000000
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159814] 1fc0: 00000006 003a8908 000c5758 0000003f 00000000 00000009 0000000a 003a7ea8
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.159821] 1fe0: 000c10f8 beb47f7c 00064a8f b6e693e6 400e0030 0000000a 00000000 00000000
Message from syslogd@beaglebone at Apr 5 19:14:18 ...
kernel:[ 3727.160219] Code: e1a00006 ebfff997 e5953000 e5c59025 (e5931010)
Segmentation fault
root@beaglebone:/boot#
My .config file contains (this is 4.1.15):
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.1.15 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.1.15 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="LynxSpring"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_KTHREAD_PRIO=0
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=17
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
# CONFIG_MEMCG_KMEM is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLUB=y
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_OMAP=y
#
# TI OMAP Common Features
#
#
# OMAP Feature Selections
#
# CONFIG_POWER_AVS_OMAP is not set
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
#
# TI OMAP/AM/DM/DRA Family
#
# CONFIG_ARCH_OMAP3 is not set
CONFIG_ARCH_OMAP4=y
# CONFIG_SOC_OMAP5 is not set
CONFIG_SOC_AM33XX=y
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_OMAP_INTERCONNECT_BARRIER=y
#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
#
# OMAP Legacy Platform Data Board Type
#
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_VDSO=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_PL310_ERRATA_727915=y
CONFIG_PL310_ERRATA_753970=y
CONFIG_PL310_ERRATA_769419=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_HEAVY_MB=y
# CONFIG_ARM_KERNMEM_PERMS is not set
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_643719=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_754327=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
CONFIG_ARM_ERRATA_773022=y
#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
CONFIG_ARM_PSCI=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RT_BASE=y
CONFIG_HAVE_PREEMPT_LAZY=y
CONFIG_PREEMPT_LAZY=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT__LL is not set
# CONFIG_PREEMPT_RTB is not set
CONFIG_PREEMPT_RT_FULL=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
CONFIG_SECCOMP=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set
#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE=""
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
# CONFIG_CPUFREQ_VOLTDM is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
# CONFIG_QORIQ_CPUFREQ is not set
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
#
# Power management options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_GENEVE is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_NAT is not set
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NF_TABLES_ARP=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NFT_BRIDGE_REJECT is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=m
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_SOCKET=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
# CONFIG_NET_EMATCH_IPSET is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_MCAST is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_LEDS is not set
CONFIG_CAN_TI_HECC=m
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_RCAR is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_CC770 is not set
#
# CAN SPI interfaces
#
CONFIG_CAN_MCP251X=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_GS_USB is not set
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_SOFTING=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_WILINK is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="am335x-pm-firmware.elf am335x-bone-scale-data.bin am335x-evm-scale-data.bin am43x-evm-scale-data.bin"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=24
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
CONFIG_ARM_CCI400_PMU=y
# CONFIG_ARM_CCN is not set
# CONFIG_BRCMSTB_GISB_ARB is not set
CONFIG_OMAP_INTERCONNECT=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_VEXPRESS_CONFIG=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=m
# CONFIG_MTD_NAND_OMAP_BCH is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_HISI504 is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# CONFIG_MTD_LPDDR2_NVM is not set
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_BLOCK=y
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_OF_UNITTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_CONFIGFS=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_LZ4_COMPRESS is not set
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_PMEM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_MG_DISK is not set
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
CONFIG_VEXPRESS_SYSCFG=y
CONFIG_BONE_CAPEMGR=m
# CONFIG_DEV_OVERLAYMGR is not set
# CONFIG_TIEQEP is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# Argus cape driver for beaglebone black
#
# CONFIG_CAPE_BONE_ARGUS is not set
CONFIG_BEAGLEBONE_PINMUX_HELPER=y
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
#
# PATA SFF controllers with BMDMA
#
#
# PIO-only SFF controllers
#
# CONFIG_PATA_PLATFORM is not set
#
# Generic fallback / legacy drivers
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
# CONFIG_TCM_IBLOCK is not set
# CONFIG_TCM_FILEIO is not set
# CONFIG_TCM_PSCSI is not set
# CONFIG_TCM_USER2 is not set
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_ISCSI_TARGET is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_ENCX24J600=m
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_DAVINCI_CPDMA=y
CONFIG_TI_CPSW_PHY_SEL=y
CONFIG_TI_CPSW_ALE=y
CONFIG_TI_CPSW=y
# CONFIG_TI_CPTS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_DP83867_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AT76C50X_USB=m
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_MAC80211_HWSIM=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
# CONFIG_ATH6KL_USB is not set
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_AR5523 is not set
CONFIG_ATH10K=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_WCN36XX is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_USB is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
# CONFIG_RT2800USB is not set
CONFIG_WL_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CU is not set
CONFIG_WL_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
# CONFIG_RSI_SDIO is not set
CONFIG_RSI_USB=m
#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=10
CONFIG_SERIAL_8250_RUNTIME_UARTS=10
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=m
CONFIG_SERIAL_OMAP_RS485=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_DCC is not set
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS_I2C_ATMEL=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_TIS_ST33ZP24 is not set
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=m
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_GPIO=y
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=m
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AS3722 is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_TI_IODELAY=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_OF_HELPER=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_ZEVIO is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
#
# MFD GPIO expanders
#
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
#
# USB GPIO expanders
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
#1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=m
# CONFIG_HDQ_MASTER_OMAP is not set
#
#1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_VOLTAGE_DOMAIN=y
#
# Voltage Domain Framework Drivers
#
CONFIG_VOLTAGE_DOMAIN_OMAP=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=y
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_HTU21=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_ADCXX=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_VEXPRESS is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_IMX_THERMAL is not set
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
# CONFIG_OMAP4_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_DA9052_WATCHDOG=m
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_RETU_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_DA9052=m
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_TI_ABB=y
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=m
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
#
# Direct Rendering Manager
#
# CONFIG_DRM is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_DA8XX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_SIMPLE=y
CONFIG_OMAP2_DSS_INIT=y
CONFIG_OMAP_DSS_BASE=y
CONFIG_OMAP2_DSS=y
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
CONFIG_OMAP2_DSS_DPI=y
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP2_DSS_HDMI_COMMON=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP5_DSS_HDMI=y
# CONFIG_OMAP2_DSS_SDI is not set
# CONFIG_OMAP2_DSS_DSI is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
# CONFIG_FB_OMAP2 is not set
#
# OMAP Display Device Drivers (new device model)
#
# CONFIG_DISPLAY_ENCODER_OPA362 is not set
# CONFIG_DISPLAY_ENCODER_TFP410 is not set
# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
# CONFIG_DISPLAY_ENCODER_SII9022 is not set
# CONFIG_DISPLAY_ENCODER_TC358768 is not set
# CONFIG_DISPLAY_CONNECTOR_DVI is not set
# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
# CONFIG_DISPLAY_PANEL_DPI is not set
# CONFIG_DISPLAY_PANEL_DSI_CM is not set
# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set
# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DISPLAY_PANEL_TLC59108 is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_LED is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_HCD_OMAP=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FUSBH200_HCD=m
CONFIG_USB_FOTG210_HCD=m
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_OMAP3=m
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
CONFIG_USB_HCD_TEST_MODE=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_MUSB_AM335X_CHILD=m
# CONFIG_USB_INVENTRA_DMA is not set
CONFIG_USB_TI_CPPI41_DMA=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
#
# Debugging features
#
# CONFIG_USB_DWC3_DEBUG is not set
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_PLATFORM=m
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_OF=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_DEBUG is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
CONFIG_TWL6030_USB=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=m
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=4
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=4
#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=m
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=m
CONFIG_USB_MV_UDC=m
CONFIG_USB_MV_U3D=m
CONFIG_USB_M66592=m
CONFIG_USB_BDC_UDC=m
#
# Platform Support
#
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_GADGET_XILINX=m
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_HID=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_HID=y
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
CONFIG_USB_G_DBGP_PRINTK=y
# CONFIG_USB_G_DBGP_SERIAL is not set
CONFIG_USB_LED_TRIG=y
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_DW=m
# CONFIG_MMC_DW_IDMAC is not set
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_EXYNOS=m
# CONFIG_MMC_DW_K3 is not set
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MC13783=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_PM8941_WLED is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_NETMON=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_ISL12057=y
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_S5M=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_MCP795=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
# CONFIG_RTC_DS1685_PROC_REGS is not set
# CONFIG_RTC_DS1685_SYSFS_REGS is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_XGENE is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_TI_EDMA=y
CONFIG_TI_DMA_CROSSBAR=y
CONFIG_DMA_OMAP=y
CONFIG_TI_CPPI41=y
# CONFIG_FSL_EDMA is not set
# CONFIG_NBPFAXI_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_MCP3202=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=m
#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_VT6656 is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
CONFIG_LIS3L02DQ=m
# CONFIG_SCA3000 is not set
#
# Analog to digital converters
#
# CONFIG_AD7606 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7280 is not set
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set
#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16060 is not set
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set
#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set
#
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_MTD_SPINAND_MT29F is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_FB_FLEX=m
CONFIG_FB_TFT_FBTFT_DEVICE=m
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_CLK_TWL6040=m
# CONFIG_CLK_QORIQ is not set
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
CONFIG_HWSPINLOCK=y
#
# Hardware Spinlock drivers
#
CONFIG_HWSPINLOCK_OMAP=y
#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_OMAP2PLUS_MBOX=y
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
CONFIG_ALTERA_MBOX=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_IOMMU_DEBUG=y
# CONFIG_ARM_SMMU is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_OMAP_REMOTEPROC=m
# CONFIG_OMAP_REMOTEPROC_WATCHDOG is not set
# CONFIG_STE_MODEM_RPROC is not set
# CONFIG_WKUP_M3_RPROC is not set
CONFIG_PRUSS_REMOTEPROC=m
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
# CONFIG_RPMSG_RPC is not set
# CONFIG_RPMSG_PRU is not set
#
# SOC (System On Chip) specific Drivers
#
CONFIG_SOC_TI=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_PALMAS=y
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
CONFIG_TI_EMIF=y
CONFIG_OMAP_GPMC=y
CONFIG_TI_EMIF_SRAM=m
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
# CONFIG_BMA180 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_MMA8452 is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
#
# Analog to digital converters
#
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD799X is not set
# CONFIG_CC10001_ADC is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TWL4030_MADC is not set
# CONFIG_TWL6030_GPADC is not set
# CONFIG_VF610_ADC is not set
#
# Amplifiers
#
# CONFIG_AD8366 is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5686 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
#
# Humidity sensors
#
# CONFIG_DHT11 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_IIO is not set
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
# CONFIG_APDS9300 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_ISL29125 is not set
# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_JSA1212 is not set
# CONFIG_LTR501 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
#
# Pressure sensors
#
# CONFIG_BMP280 is not set
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_MPL115 is not set
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
#
# Lightning sensors
#
# CONFIG_AS3935 is not set
#
# Proximity sensors
#
# CONFIG_SX9500 is not set
#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TIPWMSS=y
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_OMAP_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_DM816X_USB=m
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_SAMSUNG_USB2=m
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
CONFIG_POWERCAP=y
# CONFIG_MCB is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_NVMEM is not set
#
# Firmware Drivers
#
CONFIG_FIRMWARE_MEMMAP=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_PNFS is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=5
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_RPMSG_CLIENT is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_BCM63XX is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=32768
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_YAMA_STACKED=y
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_YAMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_OMAP_SHAM=y
CONFIG_CRYPTO_DEV_OMAP_AES=y
CONFIG_CRYPTO_DEV_OMAP_DES=y
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA1_ARM_NEON=m
# CONFIG_CRYPTO_SHA1_ARM_CE is not set
# CONFIG_CRYPTO_SHA2_ARM_CE is not set
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM_NEON=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
# CONFIG_CRYPTO_AES_ARM_CE is not set
# CONFIG_CRYPTO_GHASH_ARM_CE is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_VIRTUALIZATION=y
Pin 104 claimed by MMC1
In am335x-bone-common.dtsi pin 104 is being claimed by the MMC1 device even though it is not associated with the SDcard connector on the board schematic:
0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */
This is introduced in a8d5991 where all mmc pins are initially assigned.
A guess as to why this happened is maybe confusion of the CD pin (gpio0_6) with gpio0_7. gpio0_7 is tied to this gpio3_18 pin on the board on P9_42 so maybe both pins were claimed to avoid conflict. It doesn't seem necessary and claims a useful PRU/Mcasp resource.
Capes support for kernel 4.0?
Hi, it seems those capes under firmware haven't been updated ever since kernel 3.8?
More specifically,
-
Here is the folder "capes" for kernel 3.8
https://github.com/beagleboard/linux/tree/3.8/firmware/capes -
However, there is no subfolder named "capes" ever since 3.13
https://github.com/beagleboard/linux/tree/3.13/firmware -
Even if for kernel 3.12, the "capes" folder under "firmware" is imported from 3.8, with this commit info: "capes: import from 3.8"
https://github.com/beagleboard/linux/tree/3.12/firmware/capes
Now, here comes the question:
I'm using kernel 4.0, and I would like to know the capes support under this kernel....
Suggestions please?
Best Regards
Pei
Status of PRU
What is the status of the uio_pruss kernel driver? Is it working? I tried porting some patches from 3.12, but I'm having some trouble with it. If it is working, I can compare, if it is not working I can submit a patch once I find the error.
kernel BUG at kernel/sched/core.c:2734
BBB rev A5C freezing every day with kernel 4.1.22-ti-rt-r59.
[48816.076042] kernel BUG at kernel/sched/core.c:2734!
[48816.076047] Internal error: Oops - BUG: 0 [#7] PREEMPT SMP THUMB2
[48816.076095] Modules linked in: 8021q garp mrp stp llc usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite pru_rproc snd_soc_evm pruss omap_rng tilcdc rng_core spi_omap2_mcspi snd_soc_davinci_mcasp snd_soc_edma tda998x snd_soc_hdmi_codec uio_pdrv_genirq uio
[48816.076104] CPU: 0 PID: 73 Comm: irq/162-mmc1 Tainted: G D 4.1.22-ti-rt-r59 #1
[48816.076107] Hardware name: Generic AM33XX (Flattened Device Tree)
[48816.076112] task: dce29680 ti: dceec000 task.ti: dceec000
[48816.076119] PC is at __schedule+0x3ce/0x4f8
[48816.076124] LR is at rcu_preempt_qs+0x17/0x48
[48816.076130] pc : [<c06d679e>] lr : [<c007ca5f>] psr: 300f01b3
[48816.076130] sp : dceed298 ip : 1766e000 fp : 00000002
[48816.076134] r10: c06d68fd r9 : df913280 r8 : c0b662b0
[48816.076139] r7 : dceed2a8 r6 : dce66d00 r5 : df913280 r4 : c0b5c280
[48816.076144] r3 : 57ac6e9d r2 : c004f2dd r1 : c09e0f2c r0 : 00000000
[48816.076149] Flags: nzCV IRQs off FIQs on Mode SVC_32 ISA Thumb Segment user
[48816.076154] Control: 50c5387d Table: 9dc54019 DAC: 00000015
[48816.076158] Process irq/162-mmc1 (pid: 73, stack limit = 0xdceec218)
[48816.076163] Stack: (0xdceed298 to 0xdceee000)
[48816.076168] d280: c095f2dc c0b65188
[48816.076177] d2a0: dceed458 600f0193 0000000b c06d67a6 00000002 c00748c7 c095f2dc dceec000
[48816.076186] d2c0: dce29680 c0b65188 dceed2e0 600f0193 0000000b c06d67a6 00000002 c06d68fd
[48816.076195] d2e0: dce29680 0000000b dceed458 c0035821 dceed458 c06d3c4f dceed458 c0074e33
[48816.076204] d300: c0b57664 c0c4b244 c0c4b244 c0b65188 dceed458 600f0193 0000000b c06d67a6
[48816.076213] d320: 00000002 c0011a97 dceec218 0000000b 302f3535 c0b6b1b0 c0b65188 00000020
[48816.076221] d340: bf000000 00000004 c0952fd0 c0952fd8 00000005 36000021 20623939 38393734
[48816.076230] d360: 30363420 36652034 28203739 32306564 38362029 00203333 00000000 00000000
[48816.076238] d380: c0b65188 00000000 c0c8eeec dc8ba316 00000000 00000000 00030001 00000004
[48816.076247] d3a0: dceed458 c06d679e df913280 c06d68fd 00000002 c0009107 00000006 c0072c79
[48816.076256] d3c0: 00000004 00000000 00030001 c06d679e c0c4eaaf ffffffff dceed41c 00000010
[48816.076265] d3e0: 000cec69 00000000 0000bead 00000010 0000000a 00000006 00000006 00000000
[48816.076273] d400: 00000000 00000000 c0b65188 00000000 c0b65188 00000000 ffffffff 00000030
[48816.076282] d420: 00000010 00000001 00000010 00000000 00000000 00000000 c0b65188 00000000
[48816.076291] d440: c06d67a0 300f01b3 ffffffff dceed48c c0b662b0 c06d8eff 00000000 c09e0f2c
[48816.076299] d460: c004f2dd 57ac6e9d c0b5c280 df913280 dce66d00 dceed4f0 c0b662b0 df913280
[48816.076308] d480: c06d68fd 00000002 ce7ce000 dceed4e0 c007ca5f c06d679e 300f01b3 ffffffff
[48816.076317] d4a0: c0b662b0 c007ca5f 00000000 dce29680 c0c3341c c007f76b c0b5c280 c0b5c280
[48816.076326] d4c0: df913280 c0b65188 dceed4f0 c0b662b0 0000000b c06d68fd 00000002 c06d6407
[48816.076334] d4e0: c095f2dc c0b65188 dceed6a0 600f0193 0000000b c06d67a6 00000002 c00748c7
[48816.076343] d500: c095f2dc dceec000 dce29680 c0b65188 dceed528 600f0193 0000000b c06d67a6
[48816.076352] d520: 00000002 c06d68fd dce29680 0000000b dceed6a0 c0035821 dceed6a0 c06d3c4f
[48816.076361] d540: dceed6a0 c0074e33 c0b57664 c0c4b244 c0c4b244 c0b65188 dceed6a0 600f0193
[48816.076369] d560: 0000000b c06d67a6 00000002 c0011a97 dceec218 0000000b 302f3535 c0b6b1b0
[48816.076378] d580: c0b65188 00000020 bf000000 00000004 c0952fd0 c0952fd8 00000004 36000021
[48816.076387] d5a0: 20623939 38393734 30363420 36652034 28203739 32306564 38362029 00203333
[48816.076396] d5c0: 00000000 00000000 c0b65188 00000000 c0c8eeec dc8ba316 00000000 00000000
[48816.076404] d5e0: 00030001 00000004 dceed6a0 c06d679e df913280 c06d68fd 00000002 c0009107
[48816.076413] d600: 00000006 c0072c79 00000004 00000000 00030001 c06d679e c0c4eaaf ffffffff
[48816.076422] d620: dceed664 00000010 0000e1c4 00000000 0000bead 00000010 0000000a 00000005
[48816.076430] d640: 00000006 00000000 00000000 00000000 c0b65188 00000000 c0b65188 00000000
[48816.076439] d660: ffffffff 00000030 00000010 00000001 00000010 00000000 00000000 00000000
[48816.076448] d680: c0b65188 00000000 c06d67a0 300f01b3 ffffffff dceed6d4 c0b662b0 c06d8eff
[48816.076456] d6a0: 00000000 c09e0f2c c004f2dd 57ac6e9d c0b5c280 df913280 dce66d00 dceed738
[48816.076465] d6c0: c0b662b0 df913280 c06d68fd 00000002 9278f800 dceed728 c007ca5f c06d679e
[48816.076474] d6e0: 300f01b3 ffffffff c0b662b0 c007ca5f 00000000 dce29680 c0c3341c c007f76b
[48816.076483] d700: c0b5c280 c0b5c280 df913280 c0b65188 dceed738 c0b662b0 0000000b c06d68fd
[48816.076491] d720: 00000002 c06d6407 c095f2dc c0b65188 dceed8e8 600f0193 0000000b c06d67a6
[48816.076500] d740: 00000002 c00748c7 c095f2dc dceec000 dce29680 c0b65188 dceed770 600f0193
[48816.076509] d760: 0000000b c06d67a6 00000002 c06d68fd dce29680 0000000b dceed8e8 c0035821
[48816.076517] d780: dceed8e8 c06d3c4f dceed8e8 c0074e33 c0b57664 c0c4b244 c0c4b244 c0b65188
[48816.076526] d7a0: dceed8e8 600f0193 0000000b c06d67a6 00000002 c0011a97 dceec218 0000000b
[48816.076535] d7c0: 302f3535 c0b6b1b0 c0b65188 00000020 bf000000 00000004 c0952fd0 c0952fd8
[48816.076544] d7e0: 00000003 36000021 20623939 38393734 30363420 36652034 28203739 32306564
[48816.076552] d800: 38362029 00203333 00000000 00000000 c0b65188 00000000 c0c8eeec dc8ba316
[48816.076561] d820: 00000000 00000000 00030001 00000004 dceed8e8 c06d679e df913280 c06d68fd
[48816.076569] d840: 00000002 c0009107 00000006 c0072c79 00000004 00000000 00030001 c06d679e
[48816.076578] d860: c0c4eaaf ffffffff dceed8ac 00000010 00077306 00000000 0000beac 00000010
[48816.076586] d880: 0000000a 00000006 00000006 00000000 00000000 00000000 c0b65188 00000000
[48816.076595] d8a0: c0b65188 00000000 ffffffff 00000030 00000010 00000001 00000010 00000000
[48816.076604] d8c0: 00000000 00000000 c0b65188 00000000 c06d67a0 300f01b3 ffffffff dceed91c
[48816.076612] d8e0: c0b662b0 c06d8eff 00000000 c09e0f2c c004f2dd 57ac6e9d c0b5c280 df913280
[48816.076621] d900: dce66d00 dceed980 c0b662b0 df913280 c06d68fd 00000002 63731000 dceed970
[48816.076630] d920: c007ca5f c06d679e 300f01b3 ffffffff c0b662b0 c007ca5f 00000000 dce29680
[48816.076639] d940: c0c3341c c007f76b c0b5c280 c0b5c280 df913280 c0b65188 dceed980 c0b662b0
[48816.076647] d960: 0000000b c06d68fd 00000002 c06d6407 c095f2dc c0b65188 dceedb30 600f0193
[48816.076656] d980: 0000000b c06d67a6 00000002 c00748c7 c095f2dc dceec000 dce29680 c0b65188
[48816.076665] d9a0: dceed9b8 600f0193 0000000b c06d67a6 00000002 c06d68fd dce29680 0000000b
[48816.076674] d9c0: dceedb30 c0035821 dceedb30 c06d3c4f dceedb30 c0074e33 c0b57664 c0c4b244
[48816.076682] d9e0: c0c4b244 c0b65188 dceedb30 600f0193 0000000b c06d67a6 00000002 c0011a97
[48816.076691] da00: dceec218 0000000b 302f3535 c0b6b1b0 c0b65188 00000020 bf000000 00000004
[48816.076700] da20: c0952fd0 c0952fd8 00000002 36000022 20623939 38393734 30363420 36652034
[48816.076708] da40: 28203739 32306564 38362029 00203333 c0c8eeec 00000022 c0c8ef13 00000002
[48816.076717] da60: 00000000 dc8ba316 00000000 00000000 00030001 00000004 dceedb30 c06d679e
[48816.076725] da80: df913280 c06d68fd 00000002 c0009107 00000006 c0c8f2cc 00000004 00000000
[48816.076734] daa0: 00030001 c06d679e c0c4eaaf ffffffff dceedaf4 00000010 000286fb 00000000
[48816.076743] dac0: 0000beac 00000010 0000000a 00000006 00000006 00000000 00000000 00000000
[48816.076751] dae0: c0b65188 00000000 c0b65188 00000000 ffffffff 00000030 00000010 00000001
[48816.076760] db00: 00000010 00000000 00000000 00000000 c0b65188 00000000 c06d67a0 300f01b3
[48816.076769] db20: ffffffff dceedb64 c0b662b0 c06d8eff 00000000 c09e0f2c c004f2dd 57ac6e9d
[48816.076778] db40: c0b5c280 df913280 dce66d00 dceedbc8 c0b662b0 df913280 c06d68fd 00000002
[48816.076786] db60: 41831000 dceedbb8 c007ca5f c06d679e 300f01b3 ffffffff c0b662b0 c007ca5f
[48816.076795] db80: 00000000 dce29680 c0c3341c c007f76b c0b5c280 c0b5c280 df913280 c0b65188
[48816.076804] dba0: dceedbc8 c0b662b0 0000000b c06d68fd 00000002 c06d6407 c095f2dc c0b65188
[48816.076813] dbc0: dceeddd8 600f0193 0000000b c0048892 00000002 c00748c7 c095f2dc dceec000
[48816.076821] dbe0: dce29680 c0b65188 dceedc00 600f0193 0000000b c0048892 00000002 c06d68fd
[48816.076830] dc00: dce29680 0000000b dceeddd8 c0035821 dceeddd8 c06d3c4f dceeddd8 c0074e33
[48816.076839] dc20: c0b57664 c0c4b244 c0c4b244 c0b65188 dceeddd8 600f0193 0000000b c0048892
[48816.076847] dc40: 00000002 c0011a97 dceec218 0000000b 00000000 c0b6b1b0 c0b65188 00000020
[48816.076856] dc60: bf000000 00000004 c0952fd0 c0952fd8 00000000 66000001 20643538 34306265
[48816.076865] dc80: 64386620 33332030 28203462 33353866 63302029 00203431 00000002 c00748c7
[48816.076874] dca0: c0a07034 dceedccc 00000017 dc8ba316 000001ff ffffffec 00000017 c095543c
[48816.076882] dcc0: 00000017 dceeddd8 00000000 c06d954c 00000002 c06d37e1 00000000 c06d980d
[48816.076891] dce0: c0c8ef01 c0c8f2cc dceedd2c 00000001 00000049 00000000 0000bea9 00000001
[48816.076900] dd00: 0000000a 00000001 0000ffff c06d951d c0b6b84c 00000017 ffffffec dceeddd8
[48816.076909] dd20: c0b6b8bc c06d954c 00000002 c000920d 00000010 00000001 00000010 00000000
[48816.076917] dd40: 00000000 dc8ba316 c0b65188 c0c8ef1f c095f337 c0072c79 ffffffff 00000000
[48816.076926] dd60: 00000044 c0c5b8bc 00000032 00000002 00000000 00000000 c0c4e580 c0072d5f
[48816.076935] dd80: ff0a0100 00000000 00000006 00000006 c0b8e284 00000032 c0b8e284 c007460f
[48816.076943] dda0: 00000002 00000032 00000000 c0c4e580 c0c8eeee c007460f 00000000 c004888a
[48816.076952] ddc0: 800f01b3 ffffffff dceede0c 200f0193 0000000b c06d8db5 dce29680 dceedf38
[48816.076961] dde0: 000004f4 00000000 dce29680 00000000 c0c4ca88 dce29680 200f0193 0000000b
[48816.076970] de00: c06d954c 00000002 2e4c1000 dceede20 c0076579 c004888a 800f01b3 ffffffff
[48816.076978] de20: c0076559 dce29c3c 00000000 c00471a1 00000000 dce29680 00000000 00000001
[48816.076987] de40: dceede50 c003548f dceee010 c06d3c4f 200f0193 c0074e33 dceee010 c0c4b244
[48816.076996] de60: c0c4b244 c0b65188 dceee010 200f0193 0000000b c06d954c 00000002 c0011a97
[48816.077004] de80: dceec218 0000000b 00000000 c0b6b1b0 c0b65188 00000020 00000000 00000004
[48816.077013] dea0: c0952fd0 c0952fd8 00000000 66000001 20333230 66313330 31363020 39362030
[48816.077022] dec0: 28206531 36643866 32372029 00203065 00000000 c00748c7 c0a07034 dceedf04
[48816.077031] dee0: 00000017 dc8ba316 000002e1 000002e1 00000017 c095543c 00000017 dceee010
[48816.077039] df00: 00000000 00000000 00000000 c06d37e1 00000000 c06d980d c0c32e1f 00000000
[48816.077048] df20: 00000000 c06d68fd dced0324 dceec000 dced0300 c0076661 00000000 c0076559
[48816.077057] df40: dceedf58 c06d951d c0b6b84c 00000017 000002e1 dceee010 c0b6b8bc 00000000
[48816.077065] df60: 00000000 c000920d 2f20a0e0 00000000 dd8d0780 dced0300 00000000 00000000
[48816.077074] df80: dceedf80 dceedf80 00000001 00010001 dceedf90 dceedf90 dceedfa0 dced0340
[48816.077082] dfa0: c00483c9 00000000 00000000 c000e961 00000000 00000000 00000000 00000000
[48816.077090] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[48816.077099] dfe0: 00000000 00000000 00000000 00000000 00000013 c06d9544 a00f01b3 ffffffff
[48816.077110] [<c06d679e>] (__schedule) from [<c06d68fd>] (schedule+0x35/0x90)
[48816.077122] [<c06d68fd>] (schedule) from [<c0035821>] (do_exit+0x615/0x7c0)
[48816.077131] [<c0035821>] (do_exit) from [<c0011a97>] (die+0x35b/0x378)
[48816.077140] [<c0011a97>] (die) from [<c0009107>] (do_undefinstr+0xf3/0x124)
[48816.077150] [<c0009107>] (do_undefinstr) from [<c06d8eff>] (__und_svc_finish+0x1/0x22)
[48816.077155] Exception stack(0xdceed458 to 0xdceed4a0)
[48816.077160] d440: 00000000 c09e0f2c
[48816.077169] d460: c004f2dd 57ac6e9d c0b5c280 df913280 dce66d00 dceed4f0 c0b662b0 df913280
[48816.077178] d480: c06d68fd 00000002 ce7ce000 dceed4e0 c007ca5f c06d679e 300f01b3 ffffffff
[48816.077188] [<c06d8eff>] (__und_svc_finish) from [<c06d679e>] (__schedule+0x3ce/0x4f8)
[48816.077197] [<c06d679e>] (__schedule) from [<c06d68fd>] (schedule+0x35/0x90)
[48816.077207] [<c06d68fd>] (schedule) from [<c0035821>] (do_exit+0x615/0x7c0)
[48816.077216] [<c0035821>] (do_exit) from [<c0011a97>] (die+0x35b/0x378)
[48816.077224] [<c0011a97>] (die) from [<c0009107>] (do_undefinstr+0xf3/0x124)
[48816.077234] [<c0009107>] (do_undefinstr) from [<c06d8eff>] (__und_svc_finish+0x1/0x22)
[48816.077238] Exception stack(0xdceed6a0 to 0xdceed6e8)
[48816.077247] d6a0: 00000000 c09e0f2c c004f2dd 57ac6e9d c0b5c280 df913280 dce66d00 dceed738
[48816.077256] d6c0: c0b662b0 df913280 c06d68fd 00000002 9278f800 dceed728 c007ca5f c06d679e
[48816.077261] d6e0: 300f01b3 ffffffff
[48816.077271] [<c06d8eff>] (__und_svc_finish) from [<c06d679e>] (__schedule+0x3ce/0x4f8)
[48816.077280] [<c06d679e>] (__schedule) from [<c06d68fd>] (schedule+0x35/0x90)
[48816.077289] [<c06d68fd>] (schedule) from [<c0035821>] (do_exit+0x615/0x7c0)
[48816.077298] [<c0035821>] (do_exit) from [<c0011a97>] (die+0x35b/0x378)
[48816.077307] [<c0011a97>] (die) from [<c0009107>] (do_undefinstr+0xf3/0x124)
[48816.077316] [<c0009107>] (do_undefinstr) from [<c06d8eff>] (__und_svc_finish+0x1/0x22)
[48816.077320] Exception stack(0xdceed8e8 to 0xdceed930)
[48816.077328] d8e0: 00000000 c09e0f2c c004f2dd 57ac6e9d c0b5c280 df913280
[48816.077337] d900: dce66d00 dceed980 c0b662b0 df913280 c06d68fd 00000002 63731000 dceed970
[48816.077343] d920: c007ca5f c06d679e 300f01b3 ffffffff
[48816.077353] [<c06d8eff>] (__und_svc_finish) from [<c06d679e>] (__schedule+0x3ce/0x4f8)
[48816.077362] [<c06d679e>] (__schedule) from [<c06d68fd>] (schedule+0x35/0x90)
[48816.077371] [<c06d68fd>] (schedule) from [<c0035821>] (do_exit+0x615/0x7c0)
[48816.077380] [<c0035821>] (do_exit) from [<c0011a97>] (die+0x35b/0x378)
[48816.077389] [<c0011a97>] (die) from [<c0009107>] (do_undefinstr+0xf3/0x124)
[48816.077399] [<c0009107>] (do_undefinstr) from [<c06d8eff>] (__und_svc_finish+0x1/0x22)
[48816.077403] Exception stack(0xdceedb30 to 0xdceedb78)
[48816.077409] db20: 00000000 c09e0f2c c004f2dd 57ac6e9d
[48816.077418] db40: c0b5c280 df913280 dce66d00 dceedbc8 c0b662b0 df913280 c06d68fd 00000002
[48816.077426] db60: 41831000 dceedbb8 c007ca5f c06d679e 300f01b3 ffffffff
[48816.077436] [<c06d8eff>] (__und_svc_finish) from [<c06d679e>] (__schedule+0x3ce/0x4f8)
[48816.077444] [<c06d679e>] (__schedule) from [<c06d68fd>] (schedule+0x35/0x90)
[48816.077454] [<c06d68fd>] (schedule) from [<c0035821>] (do_exit+0x615/0x7c0)
[48816.077463] [<c0035821>] (do_exit) from [<c0011a97>] (die+0x35b/0x378)
[48816.077475] [<c0011a97>] (die) from [<c06d37e1>] (__do_kernel_fault.part.0+0x55/0x60)
[48816.077486] [<c06d37e1>] (__do_kernel_fault.part.0) from [<c06d980d>] (do_page_fault+0x2f1/0x2fc)
[48816.077497] [<c06d980d>] (do_page_fault) from [<c000920d>] (do_DataAbort+0x35/0x90)
[48816.077506] [<c000920d>] (do_DataAbort) from [<c06d8db5>] (__dabt_svc+0x35/0x60)
[48816.077510] Exception stack(0xdceeddd8 to 0xdceede20)
[48816.077516] ddc0: dce29680 dceedf38
[48816.077525] dde0: 000004f4 00000000 dce29680 00000000 c0c4ca88 dce29680 200f0193 0000000b
[48816.077533] de00: c06d954c 00000002 2e4c1000 dceede20 c0076579 c004888a 800f01b3 ffffffff
[48816.077546] [<c06d8db5>] (__dabt_svc) from [<c004888a>] (kthread_data+0xa/0x10)
[48816.077558] [<c004888a>] (kthread_data) from [<c0076579>] (irq_thread_dtor+0x21/0x8c)
[48816.077567] [<c0076579>] (irq_thread_dtor) from [<c00471a1>] (task_work_run+0x79/0xac)
[48816.077579] [<c00471a1>] (task_work_run) from [<c003548f>] (do_exit+0x283/0x7c0)
[48816.077588] [<c003548f>] (do_exit) from [<c0011a97>] (die+0x35b/0x378)
[48816.077599] [<c0011a97>] (die) from [<c06d37e1>] (__do_kernel_fault.part.0+0x55/0x60)
[48816.077611] [<c06d37e1>] (__do_kernel_fault.part.0) from [<c06d980d>] (do_page_fault+0x2f1/0x2fc)
[48816.077620] [<c06d980d>] (do_page_fault) from [<c000920d>] (do_DataAbort+0x35/0x90)
[48816.077629] Code: 699b 4798 4604 e697 (de02) 6833
[48817.528672] ---[ end trace 0000000000000008 ]---
[48817.528675] Fixing recursive fault but reboot is needed!
[48817.528683] ------------[ cut here ]------------
``
uio_pruss
I have both the uio_pruss and pruss_remoteproc modules installed, no errors reported in the Kernel logs and yet I am not getting any entries created in /sys/class/uio. It is supposed to show entries such as:
/sys/class/uio/uio0/maps/map0/addr
/sys/class/uio/uio0/maps/map0/size
Has something changed from 3.14 to 4.1 that would cause this?
there is something wrong in devicetree
in linux/arch/arm/boot/dts/am33xx.dtsi
edma: edma@49000000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
reg = <0x49000000 0x10000>;
reg-names = "edma3_cc";
interrupts = <12 13 14>;
interrupt-names = "edma3_ccint", "emda3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <20 21>;
};
0x10000 should be 0x100000
like edma_tptc0: tptc@49800000
Incorrect definition of SLEWCTRL_FAST in include/dt-bindings/pinctrl/am33xx.h
The following definition in am33xx.h is wrong:
#define SLEWCTRL_FAST (1 << 6)
A correct definition would be:
#define SLEWCTRL_FAST (0 << 6) /* dummy, fast is default */
#define SLEWCTRL_SLOW (1 << 6)
References:
- It was correct in the Rowboat kernel: mux.h:
#define AM33XX_SLEWCTRL_FAST (0 << 6)
#define AM33XX_SLEWCTRL_SLOW (1 << 6)
Section "9.2.2 Pad Control Registers": Bit 6 SLEWCTRL: 0 = Fast, 1 = Slow
Section "9.3.1.50 conf_<module>_<pin> Register": Bit 6, Field conf_<module>_pin_slewctrl: Select between faster or slower slew rate. 0 = Fast, 1 = Slow.
-
meta-ti message from Peter A. Bigot: "mis-definition of SLEWCTRL_FAST in dt-bindings amxxxx header"
-
TI forum discussion: AM335x Slew rate setup in the device tree
-
It's not fixed at kernel.org
Beaglebone black + BB-VIEW43 LCD using kernel 3.14
I'm using BB-VIEW43 + kernel 3.14 in a Beaglebone Black revision C, everything is ok, except the touchscreen, it has jitter and random touch´s, i know that in 3.8.x is working ok. Is there any patch for the ti_am335x_tsc.c for 3.14.x
Thanks
CONFIG_HAMRADIO turned off in the latest debian jessie image
This removes AX25 support and prevents using the beaglebone with ham radio applications such as Paclink-Unix, Linux RMS Gateway, APRX, and TNC-Black interface to radios.
This is on is X86 versions and was on in the debian wheezy version for the beaglebone so why would it be turned off for the beaglebone now? It is also on in the latest Raspian image for the Raspberry Pi
Power button status on event0
Hello,
i want to monitor the status of the power button in the beaglbone black, i found in google some info and i tested the following script:
!/bin/sh
BTN=/dev/input/event0
echo "Waiting for events..."
while true; do
BTNVAL=hexdump -e '8/2 "%x " "\n"' -n 16 $BTN | grep ' 74 ' | awk '{print $7}'
if [ "$BTNVAL" = "1" ]
then
echo "Power button detected"
break
fi
echo "(other event detected)"
sleep 1
done
echo "Sending shutdown..."
/sbin/shutdown -h now
echo "Finished!"
but i didn't work,
When i dumped the /dev/input/event0 nothing appears, why i'm not receiving power button events ?
I'm using a yocto generated linux distro with kernel 3.14.
Thanks
SGX/OpenGL Status
Hi there,
I've been trying to get OpenGL running on the Beaglebone Black but can't seem to get all of the pieces into one place.
What is the status of SGX kernel modules in this repo?
Are these modules compiled in already?
- omaplfb
- pvrsrvkm
- bufferclass_ti
They are mentioned on the following TI wiki page: http://processors.wiki.ti.com/index.php/Graphics_SDK_Quick_installation_and_user_guide#Kernel_Modules
Any information would be great!
Driver crash on boot
I have a custom driver module (uio). If I move the module into my home directory and reboot, then load the module (insmod) manually, everything is perfect. If I let the module exist in the lib/modules system (which is where I originally moved it from) it crashes during boot (with the long 1 1/2 minute wait delay, etc.)
I think my driver may be effecting other drivers to get loaded "before their time". So, question-- using systemd, how the heck can I assure my driver is the last one loaded in the system? I used to do this easy-peasy with initd.
Thanks,
Bryan
Current G_MULTI_* config not working for windows
As currently both RNDIS and CDC Ethernet USB gadget are activated, Windows is not able to load drivers for BeagleBone Black with G_MULTI connected by USB:
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
from Kernel Documentation:
** Windows host drivers
For the gadget two work under Windows two conditions have to be met:
*** Detecting as composite gadget
[...]
The only thing to worry is that the gadget has to have a single configuration so a dual RNDIS and CDC ECM gadget won't work [...]
Could CONFIG_USB_G_MULTI_CDC just be disabled per default?
`make prepare` race condition
Sometimes i get the following error while compiling 4.4.9-ti-rt-r25
| HOSTCC scripts/basic/bin2c
| CHK include/generated/utsrelease.h
| UPD include/generated/utsrelease.h
| fixdep: error opening depfile: scripts/basic/.bin2c.d: No such file or directory
| scripts/Makefile.host:91: recipe for target 'scripts/basic/bin2c' failed
| make[3]: *** [scripts/basic/bin2c] Error 2
Sounds to me like a racing issue. Did anyone hit this before?
PRUSS doesn't work well
This issue has already been on 3.8 kernel
beagleboard/kernel#37
Anytime I try to enable pruss via .dtbo I get
pruss_uio 4a300000.pruss: No children
If found out that source code (uio_pruss.c) for pruss driver on kernel 3.8 is different from kernel 4.1. And pruss doesn't throw error when there is no child nodes in pruss node of dts file on 3.8. Initialization won't continue after this error, but i guess pruss driver should work well without any children nodes in dts file.
Not able to get uboot promplt., getting "CCCC" on minicom terminal.
Hi,
I was trying to boot BBB over tftp, but am not getting tftp boot.
I am getting "CCCC" on minicom terminal whenever I press reset button. Is the eMMC/uboot partition got corrupted ?
Please help in getting the uboot prompt.
Thanks,
Y M Patil
omap_hwmod WARNING during boot regarding enabled state
On latest branch 3.14 on a custom AM3352 board, getting the following warnings
[ 0.377214] ------------[ cut here ]------------
[ 0.377277] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2170 _enable+0x2d0/0x320()
[ 0.377294] omap_hwmod: mpu: enabled state can only be entered from initialized, idle, or disabled state
[ 0.377320] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.14.19-NPServe-dirty #35
[ 0.377337] Backtrace:
[ 0.377389] from
[ 0.377405] r6:0000087a r5:00000009 r4:cf14fc08 r3:00000000
[ 0.377462] from
[ 0.377499] from
[ 0.377525] from
[ 0.377540] r8:cf1dbe40 r7:cf1d9600 r6:c04be640 r5:ffffffea r4:c0496054
[ 0.377596] from
[ 0.377610] r3:c03c6fac r2:c03c8114
[ 0.377644] from
[ 0.377658] r8:cf1dbe40 r7:cf1d9600 r6:a0000113 r5:c04960b4 r4:c0496054
[ 0.377716] from
[ 0.377731] r6:cf1d9610 r5:cf1dbe00 r4:00000001 r3:cf1dbdc0
[ 0.377780] from
[ 0.377795] r5:00000001 r4:cf1dbe00
[ 0.377842] from
[ 0.377857] r10:00000000 r9:cf1d9810 r8:cf1d9610 r7:00000001 r6:00000000 r5:00000000
[ 0.377903] r4:ffffffff
[ 0.377933] from
[ 0.377947] r8:00000000 r7:00000001 r6:cf1d9610 r5:ffffffff r4:cf06b308 r3:ffffffff
[ 0.378007] from
[ 0.378022] r7:cf1d9810 r6:cf1d9618 r5:00000000 r4:cf1d9610
[ 0.378079] from
[ 0.378111] from
[ 0.378125] r10:00000000 r8:00000000 r7:00000000 r6:cf1d9600 r5:00000000 r4:cf1d9610
[ 0.378184] from
[ 0.378210] from
[ 0.378224] r7:c0441118 r6:00000001 r5:c0441374 r4:cfbeb45c
[ 0.378273] from
[ 0.378287] r10:c04c4148 r9:cfbeb45c r8:cf1d9810 r7:c0441118 r6:00000001 r5:c0441374
[ 0.378333] r4:cfbeb3e4
[ 0.378361] from
[ 0.378375] r10:00000001 r9:c043d298 r8:00000000 r7:c0441374 r6:c0441118 r5:cfbeadd0
[ 0.378421] r4:cfbeb3e4
[ 0.378457] from
[ 0.378471] r10:c04154d0 r8:00000064 r7:c04171d4 r6:00000000 r5:c0441118 r4:c0441364
[ 0.378530] from
[ 0.378544] r5:c043d280 r4:00000003
[ 0.378586] from
[ 0.378612] from
[ 0.378637] from
[ 0.378651] r10:c04154d0 r9:c043d298 r8:00000064 r7:c04c5340 r6:c04702a0 r5:c043d280
[ 0.378697] r4:00000003
[ 0.378739] from
[ 0.378753] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c032a54c
[ 0.378798] r4:00000000
[ 0.378828] from
[ 0.378842] r4:00000000 r3:00000000
[ 0.378869] ---[ end trace 3406ff24bd973830 ]---
[ 0.383650] ------------[ cut here ]------------
[ 0.383701] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2170 _enable+0x2d0/0x320()
[ 0.383719] omap_hwmod: l3_main: enabled state can only be entered from initialized, idle, or disabled state
[ 0.383742] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.14.19-NPServe-dirty #35
[ 0.383757] Backtrace:
[ 0.383801] from
[ 0.383816] r6:0000087a r5:00000009 r4:cf14fc68 r3:00000000
[ 0.383870] from
[ 0.383901] from
[ 0.383927] from
[ 0.383941] r8:cf1dbb40 r7:cf1d9200 r6:c04be640 r5:ffffffea r4:c0495b94
[ 0.383997] from
[ 0.384012] r3:c03c5f04 r2:c03c8114
[ 0.384045] from
[ 0.384059] r8:cf1dbb40 r7:cf1d9200 r6:a0000113 r5:c0495bf4 r4:c0495b94
[ 0.384116] from
[ 0.384131] r6:cf1d9210 r5:cf1dbb00 r4:00000001 r3:cf1dbac0
[ 0.384180] from
[ 0.384194] r5:00000001 r4:cf1dbb00
[ 0.384238] from
[ 0.384253] r10:00000000 r9:00000000 r8:cf1d9210 r7:00000001 r6:00000000 r5:00000000
[ 0.384299] r4:ffffffff
[ 0.384329] from
[ 0.384343] r8:00000000 r7:00000001 r6:cf1d9210 r5:ffffffff r4:cf06b308 r3:ffffffff
[ 0.384403] from
[ 0.384417] r7:00000000 r6:cf1d9218 r5:00000000 r4:cf1d9210
[ 0.384473] from
[ 0.384503] from
[ 0.384517] r10:00000000 r8:00000000 r7:00000000 r6:cf1d9200 r5:00000000 r4:cf1d9210
[ 0.384575] from
[ 0.384601] from
[ 0.384615] r7:c0441118 r6:00000001 r5:c0441374 r4:cfbebe58
[ 0.384664] from
[ 0.384678] r10:00000001 r9:c043d298 r8:00000000 r7:c0441374 r6:c0441118 r5:cfbeadd0
[ 0.384724] r4:cfbebe58
[ 0.384758] from
[ 0.384772] r10:c04154d0 r8:00000064 r7:c04171d4 r6:00000000 r5:c0441118 r4:c0441364
[ 0.384831] from
[ 0.384845] r5:c043d280 r4:00000003
[ 0.384883] from
[ 0.384909] from
[ 0.384934] from
[ 0.384948] r10:c04154d0 r9:c043d298 r8:00000064 r7:c04c5340 r6:c04702a0 r5:c043d280
[ 0.384995] r4:00000003
[ 0.385031] from
[ 0.385045] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c032a54c
[ 0.385090] r4:00000000
[ 0.385119] from
[ 0.385133] r4:00000000 r3:00000000
[ 0.385158] ---[ end trace 3406ff24bd973831 ]---
[ 0.392247] syscon 44e10000.syscon: regmap [mem 0x44e10000-0x44e107ff] registered
[ 0.395140] platform 49000000.edma: alias fck already exists
[ 0.395195] platform 49000000.edma: alias fck already exists
[ 0.395232] platform 49000000.edma: alias fck already exists
[ 0.404560] OMAP GPIO hardware version 0.1
[ 0.454095] ------------[ cut here ]------------
[ 0.454162] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2170 _enable+0x2d0/0x320()
[ 0.454180] omap_hwmod: ocmcram: enabled state can only be entered from initialized, idle, or disabled state
[ 0.454205] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.14.19-NPServe-dirty #35
[ 0.454222] Backtrace:
[ 0.454273] from
[ 0.454288] r6:0000087a r5:00000009 r4:cf14fc08 r3:00000000
[ 0.454346] from
[ 0.454381] from
[ 0.454408] from
[ 0.454422] r8:cf1f4ec0 r7:cf1cc200 r6:c04be640 r5:ffffffea r4:c0496184
[ 0.454479] from
[ 0.454493] r3:c03cda90 r2:c03c8114
[ 0.454527] from
[ 0.454541] r8:cf1f4ec0 r7:cf1cc200 r6:a0000113 r5:c04961e4 r4:c0496184
[ 0.454600] from
[ 0.454614] r6:cf1cc210 r5:cf1f4e80 r4:00000001 r3:cf1f4e40
[ 0.454663] from
[ 0.454677] r5:00000001 r4:cf1f4e80
[ 0.454725] from
[ 0.454740] r10:00000000 r9:cf1d9210 r8:cf1cc210 r7:00000001 r6:00000000 r5:00000000
[ 0.454786] r4:ffffffff
[ 0.454816] from
[ 0.454830] r8:00000000 r7:00000001 r6:cf1cc210 r5:ffffffff r4:cf06b308 r3:ffffffff
[ 0.454890] from
[ 0.454905] r7:cf1d9210 r6:cf1cc218 r5:00000000 r4:cf1cc210
[ 0.454962] from
[ 0.454994] from
[ 0.455008] r10:00000000 r8:00000000 r7:00000000 r6:cf1cc200 r5:00000000 r4:cf1cc210
[ 0.455067] from
[ 0.455093] from
[ 0.455107] r7:c0441118 r6:00000001 r5:c0441374 r4:cfbf5b38
[ 0.455156] from
[ 0.455170] r10:c04c4148 r9:cfbf5b38 r8:cf1d9210 r7:c0441118 r6:00000001 r5:c0441374
[ 0.455216] r4:cfbebe58
[ 0.455244] from
[ 0.455258] r10:00000001 r9:c043d298 r8:00000000 r7:c0441374 r6:c0441118 r5:cfbeadd0
[ 0.455304] r4:cfbebe58
[ 0.455339] from
[ 0.455353] r10:c04154d0 r8:00000064 r7:c04171d4 r6:00000000 r5:c0441118 r4:c0441364
[ 0.455412] from
[ 0.455426] r5:c043d280 r4:00000003
[ 0.455469] from
[ 0.455495] from
[ 0.455521] from
[ 0.455535] r10:c04154d0 r9:c043d298 r8:00000064 r7:c04c5340 r6:c04702a0 r5:c043d280
[ 0.455581] r4:00000003
[ 0.455622] from
[ 0.455636] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c032a54c
[ 0.455681] r4:00000000
[ 0.455711] from
[ 0.455725] r4:00000000 r3:00000000
[ 0.455751] ---[ end trace 3406ff24bd973832 ]---
[ 0.465705] ------------[ cut here ]------------
[ 0.465765] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2170 _enable+0x2d0/0x320()
[ 0.465782] omap_hwmod: gpmc: enabled state can only be entered from initialized, idle, or disabled state
[ 0.465806] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.14.19-NPServe-dirty #35
[ 0.465823] Backtrace:
[ 0.465869] from
[ 0.465885] r6:0000087a r5:00000009 r4:cf14fc08 r3:00000000
[ 0.465938] from
[ 0.465972] from
[ 0.465998] from
[ 0.466012] r8:cf1f4700 r7:cf1ea800 r6:c04be640 r5:ffffffea r4:c04959cc
[ 0.466070] from
[ 0.466084] r3:c03c629c r2:c03c8114
[ 0.466118] from
[ 0.466132] r8:cf1f4700 r7:cf1ea800 r6:a0000113 r5:c0495a2c r4:c04959cc
[ 0.466189] from
[ 0.466203] r6:cf1ea810 r5:cf1f46c0 r4:00000001 r3:cf1f4680
[ 0.466252] from
[ 0.466266] r5:00000001 r4:cf1f46c0
[ 0.466311] from
[ 0.466325] r10:00000000 r9:cf1d9210 r8:cf1ea810 r7:00000001 r6:00000000 r5:00000000
[ 0.466371] r4:ffffffff
[ 0.466402] from
[ 0.466416] r8:00000000 r7:00000001 r6:cf1ea810 r5:ffffffff r4:cf06b308 r3:ffffffff
[ 0.466476] from
[ 0.466491] r7:cf1d9210 r6:cf1ea818 r5:00000000 r4:cf1ea810
[ 0.466545] from
[ 0.466576] from
[ 0.466590] r10:00000000 r8:00000000 r7:00000000 r6:cf1ea800 r5:00000000 r4:cf1ea810
[ 0.466649] from
[ 0.466675] from
[ 0.466689] r7:c0441118 r6:00000001 r5:c0441374 r4:cfbf6440
[ 0.466737] from
[ 0.466752] r10:c04c4148 r9:cfbf6440 r8:cf1d9210 r7:c0441118 r6:00000001 r5:c0441374
[ 0.466798] r4:cfbebe58
[ 0.466826] from
[ 0.466840] r10:00000001 r9:c043d298 r8:00000000 r7:c0441374 r6:c0441118 r5:cfbeadd0
[ 0.466886] r4:cfbebe58
[ 0.466919] from
[ 0.466934] r10:c04154d0 r8:00000064 r7:c04171d4 r6:00000000 r5:c0441118 r4:c0441364
[ 0.466992] from
[ 0.467006] r5:c043d280 r4:00000003
[ 0.467046] from
[ 0.467072] from
[ 0.467098] from
[ 0.467113] r10:c04154d0 r9:c043d298 r8:00000064 r7:c04c5340 r6:c04702a0 r5:c043d280
[ 0.467159] r4:00000003
[ 0.467198] from
[ 0.467213] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c032a54c
[ 0.467259] r4:00000000
[ 0.467289] from
[ 0.467303] r4:00000000 r3:00000000
[ 0.467329] ---[ end trace 3406ff24bd973833 ]---
EDMA API is broken
Hello.
After migration from 3.8.13 kernel to 4.1.18 on my BBB I have found that compilation of my custom kernel driver which using EDMA API is impossible.
My driver based on this classical tutorial http://processors.wiki.ti.com/index.php/EDMA_sample_test_application. But now in file linux/platform_data/edma.h absent basic function for work with EDMA like as edma_start, edma_stop, edma_alloc_channel ...
it's happened after 0f30e8c commit.
Which guide should I use for porting my application from old kenel to new ?
Thanks
Kernel 3.8.13 - TSC_ADC freezing
Hi,
is there any chance that kernel 3.8.13 will be updated from version bone79(13th Oct 2015)? I have problem with touchscreen driver (TSC_ADC "freezing") which was updated on 6th Jan 2016 for kernel 4.1.X: https://github.com/torvalds/linux/blob/master/drivers/input/touchscreen/ti_am335x_tsc.c
Then I would like to update kernel via script "/opt/scripts/tools/update_kernel.sh"
Thanks.
Boot up issue with Beaglebone black.
I tried connecting an ethernet cable to my beaglebone, but for some reason I am not able to make SSH connection to it. I also tried connecting the LCD display , but on LCD all it shows is the linux logo at the boot up and then the screen remains blank forever.
So, I made use of FTDI cable to debug the possible issue with my beaglebone black with LCD screen attached to it as well, It shows following errors:
(1) bone-capemgr bone_capemgr.9: failed to load firmware 'BB-DCAN1-00A0.dtbo
(2) bone-capemgr bone_capemgr.9: slot #9: BB-UART1 conflict P9.24 (#3:BB-BONE-LCD4-01)
(3) bone-capemgr bone_capemgr.9: slot #9:Failed verification
(4) bone-capemgr bone_capemgr.9: slot #10: BB-UART2 conflict P9.21 (#7:ADAFRUIT-UART2)
(5)bone-capemgr bone_capemgr.9: slot #10: Failed
Can someone please help me out with this?
Thanks,
Kernel 4.1 compilation error
Hello All,
I have tried compiling the Kernel 4.1 in my Ubuntu 14.04. I have installed the cross compiler "gcc-arm-linux-gnueabihf".
Branch: 4.1
Tag: 4.1.6-ti-r11
Config file used:
bb.org_defconfig
Command used:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage dtbs LOADADDR=0x80008000 -j8Error:
arch/arm/kernel/asm-offsets.c:54:2: error: #error Your compiler is too buggy; it is known to miscompile kernels
#error Your compiler is too buggy; it is known to miscompile kernels
^
arch/arm/kernel/asm-offsets.c:55:2: error: #error and result in filesystem corruption and oopses.
#error and result in filesystem corruption and oopses.
^
make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
make: *** Waiting for unfinished jobs....Thanks,
Parthiban N
Slot conflict resolution without compiling custom kernel?
Hello
First off thank you. Secondly, I have an issue that has so far led me to having to consider compiling my own kernel, which I'd like to avoid. I am thinking there may be an easier solution that is just not well-documented yet.
I have a LCD cape that is causing a conflict in that it is disabling my UART2 in order to provide a hardware button [Enter key]. It is recognized as the BB-BONE-LCD4-01.
Between the LCD cape and the Beaglebone, I have a custom PCB (I call it a cape, but it does not provide an EEPROM with any identification information). This PCB utilizes UART2 via a MAX3232 chip. This was working perfectly fine before stacking the LCD cape.
I thought that I was already overriding the conflict by editing /boot/uboot/uEnv.txt to have the line cape_enable=capemgr.enable_partno=BB-UART1,BB-UART2 but this is not the case. The LCD cape overrides my settings and disables UART2 for the Enter button.
Is there a way to configure the beaglebone to prioritize my decision to enable the UART2 over the Enter key?
Some relevant lines of dmesg:
[ 0.710548] bone-capemgr bone_capemgr.9: loader: before slot-8 BB-UART2:00A0 (prio 0)
[ 0.710566] bone-capemgr bone_capemgr.9: loader: check slot-8 BB-UART2:00A0 (prio 0)
[ 0.710581] bone-capemgr bone_capemgr.9: loader: after slot-8 BB-UART2:00A0 (prio 0)
[ 0.710596] bone-capemgr bone_capemgr.9: slot #8: Requesting part number/version based 'BB-UART2-00A0.dtbo
[ 0.710612] bone-capemgr bone_capemgr.9: slot #8: Requesting firmware 'BB-UART2-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 0.710635] bone-capemgr bone_capemgr.9: slot #8: dtbo 'BB-UART2-00A0.dtbo' loaded; converting to live tree
[ 0.710792] bone-capemgr bone_capemgr.9: slot #8: BB-UART2 conflict P9.21 (#3:BB-BONE-LCD4-01)
[ 0.719838] bone-capemgr bone_capemgr.9: slot #8: Failed verification
[ 0.726586] bone-capemgr bone_capemgr.9: loader: failed to load slot-8 BB-UART2:00A0 (prio 0)
Thank you
chipsee beaglebone expansion. the touchscreen not work
Hi , i have http://www.chipsee.com/product/evm/beagle/beaglebone-black-expansion-capacitive.html , compiled the kernel With am335x-bone-bbb-exp-c.dtsi , the touchscreen worked , but Invested , the axis Y goes to 1024 to 0 , and axis X goes 0 to 768 , how to fix it ? driver is the problem ?
Thank !
chipsee beaglebone expansion. the touchscreen not work
this is my props for my touchscreen:
DISPLAY=:0.0 xinput --list-props "EP0790M09"
Device 'EP0790M09':
Device Enabled (116): 1
Coordinate Transformation Matrix (117): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (242): 0
Device Accel Constant Deceleration (243): 1.000000
Device Accel Adaptive Deceleration (244): 1.000000
Device Accel Velocity Scaling (245): 10.000000
Device Product ID (235): 0, 0
Device Node (236): "/dev/input/event1"
Evdev Axis Inversion (246): 0, 0
Evdev Axis Calibration (247): 1024, 0, 0, 600
Evdev Axes Swap (248): 0
Axis Labels (249): "Abs MT Position X" (240), "Abs MT Position Y" (241), "None" (0), "None" (0)
Button Labels (250): "Button Unknown" (237), "Button Unknown" (237), "Button Unknown" (237), "Button Wheel Up" (122), "Button Wheel Down" (123)
Evdev Scrolling Distance (251): 0, 0, 0
Evdev Middle Button Emulation (252): 0
Evdev Middle Button Timeout (253): 50
Evdev Third Button Emulation (254): 0
Evdev Third Button Emulation Timeout (255): 1000
Evdev Third Button Emulation Button (256): 3
Evdev Third Button Emulation Threshold (257): 20
Evdev Wheel Emulation (258): 0
Evdev Wheel Emulation Axes (259): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (260): 10
Evdev Wheel Emulation Timeout (261): 200
Evdev Wheel Emulation Button (262): 4
Evdev Drag Lock Buttons (263): 0*
according for evtest:
nand/omap2 module is not available if onenand/omap2 is
nand/omap2.ko is not shipped (make modules_install) if onenand/omap2 is built.
(if I'm correct, onenand/omap2 is not supposed to supersede nand/omap2 ?)
After build I have:
# /beagleboard/linux (master %=)$ find -name omap2.ko
./drivers/mtd/nand/omap2.ko
./drivers/mtd/onenand/omap2.ko
But only the onenand/omap2 module gets shipped upon make modules_install
# /beagleboard/linux (master %=)$ find /lib/modules/4.1.5/ -name omap2.ko
/lib/modules/4.1.5/kernel/drivers/mtd/onenand/omap2.ko
Also, on the running system (BeagleBoard C3) the nand is not found.
@rogerq , I don't think it's fixed with your last commits. Could you confirm ?
For ref, my initial discussion with @RobertCNelson : RobertCNelson/linux-dev#40
Thanks
compile problem
Hi all,
I was trying to compile from branch 3.14, for my beaglebone white, once changed my config to avoid sleep mode CONFIG_SUSPEND = NO but compiling there was a problem. It tries to compile something with it anyway, see the error:
::::::
CC arch/arm/mach-omap2/pm33xx.o
arch/arm/mach-omap2/pm33xx.c: In function ‘am33xx_pm_init’:
arch/arm/mach-omap2/pm33xx.c:546:2: error: ‘cefuse_pwrdm’ undeclared (first use in this function)
arch/arm/mach-omap2/pm33xx.c:546:2: note: each undeclared identifier is reported only once for each function it appears in
::::::
Once reintroduced CONFIG_SUSPEND = YES it compiled again..
Is it here the right place to notify that?
SKiAt
3.8.13-bone72 kernel included rt2x00 driver doesn't allow interface MAC changes
Apparently this issue:
http://comments.gmane.org/gmane.linux.kernel.wireless.general/108248
Since in kernel 4.1.3-bone14 the driver is the same version (2.3.0) and does allow MAC changes, 3.8.13 kernel could be patched too.
enc28j60 driver
Has anyone gotten the enc28j60 driver working in the drivers/net/ethernet/microchip directory?
I'm looking for any device tree structures that can help bring this up. Everything I've found on the internet doesn't seem to work for Beaglebone. I'm also aware of how woefully old enc28j60.c is and have updated it for the device tree (adding 'compatible', etc.)
Here's my current DT for this device:
/* */
/dts-v1/;
/plugin/;
/ {
compatible = "ti,beaglebone", "ti,beaglebone-black";
/* identification */
part-number = "BB-ENC28J60-01";
version = "00A0";
/* state the resources this cape uses */
exclusive-use =
/* the pin header uses */
"P9.17", /* spi0_cs0 */
"P9.18", /* spi0_d1 */
"P9.21", /* spi0_d0 */
"P9.22", /* spi0_sclk */
/* the hardware ip uses */
"spi0";
fragment@0 {
target = <&am33xx_pinmux>;
__overlay__ {
/* default state has all gpios released and mode set to uart1 */
bb_spi0_pins: pinmux_bb_spi0_pins {
pinctrl-single,pins = <
0x150 0x30 /* spi0_sclk.spi0_sclk, INPUT_PULLUP | MODE0 */
0x154 0x30 /* spi0_d0.spi0_d0, INPUT_PULLUP | MODE0 */
0x158 0x10 /* spi0_d1.spi0_d1, OUTPUT_PULLUP | MODE0 */
0x15c 0x10 /* spi0_cs0.spi0_cs0, OUTPUT_PULLUP | MODE0 */
>;
};
};
};
fragment@1 {
target = <&spi0>; /* spi0 is numbered correctly */
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&bb_spi0_pins>;
channel@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spidev";
reg = <0>;
spi-max-frequency = <16000000>;
spi-cpha;
//reg = < 0x00002160 0x00000020 >;
interrupt-parent = < &cpu >;
interrupts = < 2 >;
clock-frequency = < 100000000 >;
baud-width = < 8 >; /* BAUD_WIDTH type NUMBER */
gpios = < &spi1_cs 0 0 >;
ethernet: enc28j60@0 {
compatible = "microchip,enc28j60";
spi-max-frequency = < 20000000 >;
reg = < 0 >;
interrupts = < 4 >;
interrupt_deassert_reg = < 0x00003000 >;
};
};
channel@1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "spidev";
reg = <1>;
spi-max-frequency = <16000000>;
};
};
};
};
Patch missing for musb_cppi41.c in 3.14 branch
The patch "usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq" is missing for musb_cppi41.c in the 3.14 branch, while newer and older patches have been applied.
Compile error: multiple definitions of functions in of.h
Compiling this linux I get many errors similar to:
arch/arm/mach-omap2/dss-common.o: In function of_changeset_add_property_u32': |/kernel-source/include/linux/of.h:1116: multiple definition ofof_changeset_add_property_u32'
| arch/arm/mach-omap2/id.o:/kernel-source/include/linux/of.h:1116: first defined here
| arch/arm/mach-omap2/dss-common.o: In function of_changeset_add_property_bool': | /kernel-source/include/linux/of.h:1122: multiple definition ofof_changeset_add_property_bool'
| arch/arm/mach-omap2/id.o:/kernel-source/include/linux/of.h:1122: first defined here
| /kernel-source/scripts/Makefile.build:337: recipe for target 'arch/arm/mach-omap2/built-in.o' failed
The patch which introduces this is:
commit 8d2e106
Author: Pantelis Antoniou [email protected]
Date: Wed Jun 10 18:35:53 2015 +0300
exec bit should not be set on am335x-pm-firmware.bin
For what its worth, firmware/am335x-pm-firmware.bin should probably not be set to executable. It is a binary blob and not something the the BBB can run. firmware/am335x-pm-firmware.elf is debatable as well. I have seen elf/so files both with and without the execute bit set, so I'm not sure what the proper convention should be.
Incorrectly using internal clock for HDMI audio
I am developing an application that uses the mcasp with I2S using an external clock and used the HDMI devicetree as an example. I was watching the output with an oscilloscope and noticed that the bitclock is exactly 12.0 MHz when outputting 192 kHz audio, instead of the exact 12.288 that it is supposed to be. This must be because it is dividing down from the AM335X internal clock (24MHz) instead of the external 24.576 clock (which is there specifically for the HDMI).
In the latest 4.4.7 release, simple-audio-card is used as the machine driver between the mcasp and HDMI codec. Reading through its source code, I am not sure it is able to properly set up the mcasp for an external clock. Nowhere does it call snd_soc_dai_set_sysclk with codec_dai and SND_SOC_CLOCK_IN, which I believe means that the mcasp will not receive an external clock.
I was wondering if someone could confirm my observation. You can measure P9_29 (the frame clock) while playing 192kHz audio. If I am correct, you will not see 192 kHz (the proper value) and instead will see 187.5 kHz.
3.8.13 bone66 mmcqd related kernel panic under disk load
With netconsole enabled I was finally able to capture some details on the random freezes I'm getting on my BBB during it's overnight backup. At times it crashed the same night I last rebooted it while at other times it worked up to 3 weeks before crashing. I've had the issue with previous kernel versions as well, e.g. I was on bone47 and bone62. Pretty much since I had fully set up my Beagle at the beginning of the year.
This is what I had in the netconsole log today:
[224948.385572] INFO: task mmcqd/0:71 blocked for more than 60 seconds.
[224948.392495] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[224948.400964] mmcqd/0 D c04a09ff 0 71 2 0x00000000
[224948.408086] Kernel panic - not syncing: hung_task: blocked tasks
[224948.414593] [<c001125d>] (unwind_backtrace+0x1/0x98) from [<c049bb93>] (panic+0x5b/0x160)
[224948.423351] [<c049bb93>] (panic+0x5b/0x160) from [<c00724ed>] (watchdog+0x1a1/0x1c8)
[224948.431661] [<c00724ed>] (watchdog+0x1a1/0x1c8) from [<c004485f>] (kthread+0x6b/0x74)
[224948.440058] [<c004485f>] (kthread+0x6b/0x74) from [<c000c7fd>] (ret_from_fork+0x11/0x34)
[224948.448708] drm_kms_helper: panic occurred, switching back to text console
I'm running Debian 7 with the latest updates where the system runs from the eMMC, but there's also a SD card for storage purposes and an USB stick for swap, temporary files etc.
Doing a search, I did come across another report of the issue:
https://github.com/archlinuxarm/PKGBUILDs/issues/749
and that also links back to a thread on the beagleboard group:
http://comments.gmane.org/gmane.comp.hardware.beagleboard.user/43479
Apart from this issue, I'm pretty happy with the 3.8.13 kernel. Is there a way that a fix for it could be backported from one of the newer kernel versions?
Or should I just update to one of the newer versions? If so, what specific kernel version would you recommend? It should be pretty stable as the Beagle is supposed to run as a headless server on its own. I don't need any cape support, but would like to have basic ACPI support so I can initiate a Debian shutdown with the power button on the BBB. And on finished shutdown, the Beagle should turn itself off.
Thanks,
Sebastian
EDIT: Just fixed the log entry by marking it as code so it's not partially filtered. Sorry for not noticing that before.
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.