bastelschlumpf / m5paperweather Goto Github PK

Hello, when I try to compile, I get the erreor below (MyData not declared in this scope).

In file included from /home/user/Arduino/M5PaperWeather-master/weather/Utils.h:23,
from /home/user/Arduino/M5PaperWeather-master/weather/Weather.h:26,
from /home/user/Arduino/M5PaperWeather-master/weather/Data.h:24,
from /home/user/Arduino/M5PaperWeather-master/weather/weather.ino:26:
Time.h:26:21: error: 'MyData' was not declared in this scope
bool SetRTCDateTime(MyData &myData)
^~~~~~
/home/user/Arduino/M5PaperWeather-master/weather/Time.h:26:21: note: suggested alternative: 'FT_Data'
bool SetRTCDateTime(MyData &myData)
^~~~~~
FT_Data
Time.h:26:29: error: 'myData' was not declared in this scope
bool SetRTCDateTime(MyData &myData)
^~~~~~
/home/user/Arduino/M5PaperWeather-master/weather/Time.h:26:29: note: suggested alternative: 'FT_Data'
bool SetRTCDateTime(MyData &myData)
^~~~~~
FT_Data
/home/user/Arduino/M5PaperWeather-master/weather/weather.ino: In function 'void setup()':
weather:53:31: error: 'SetRTCDateTime' cannot be used as a function
SetRTCDateTime(myData);
^
In file included from /home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson.hpp:42,
from /home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson.h:9,
from /home/user/Arduino/M5PaperWeather-master/weather/Weather.h:25,
from /home/user/Arduino/M5PaperWeather-master/weather/Data.h:24,
from /home/user/Arduino/M5PaperWeather-master/weather/weather.ino:26:
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp: In instantiation of 'static T ArduinoJson::V6212PB::Converter<T, Enable>::fromJson(ArduinoJson::V6212PB::JsonVariantConst) [with T = char*; Enable = void]':
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/VariantRefBase.hpp:53:34: required from 'typename ArduinoJson::V6212PB::detail::enable_if<(! ArduinoJson::V6212PB::detail::ConverterNeedsWriteableRef::value), T>::type ArduinoJson::V6212PB::detail::VariantRefBase::as() const [with T = char*; TDerived = ArduinoJson::V6212PB::detail::MemberProxy<ArduinoJson::V6212PB::detail::ElementProxy<ArduinoJson::V6212PB::detail::MemberProxy<ArduinoJson::V6212PB::detail::MemberProxy<ArduinoJson::V6212PB::JsonObject, const char*>, const char*> >, const char*>; typename ArduinoJson::V6212PB::detail::enable_if<(! ArduinoJson::V6212PB::detail::ConverterNeedsWriteableRef::value), T>::type = char*]'
/home/user/Arduino/M5PaperWeather-master/weather/Weather.h:117:75: required from here
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:24:20: error: no matching function for call to 'convertFromJson(ArduinoJson::V6212PB::JsonVariantConst&, char*&)'
convertFromJson(src, result); // Error here? See https://arduinojson.org/v6/unsupported-as/
~~~~~~~~~~~~~~~^~~~~~~~~~~~~
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:267:13: note: candidate: 'void ArduinoJson::V6212PB::convertFromJson(ArduinoJson::V6212PB::JsonVariantConst, String&)'
inline void convertFromJson(JsonVariantConst src, ::String& dst) {
^~~~~~~~~~~~~~~
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:267:13: note: conversion of argument 2 would be ill-formed:
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:24:26: error: cannot bind non-const lvalue reference of type 'String&' to an rvalue of type 'String'
convertFromJson(src, result); // Error here? See https://arduinojson.org/v6/unsupported-as/
^~~~~~
In file included from /home/user/.arduino15/packages/m5stack/hardware/esp32/2.0.7/cores/esp32/Arduino.h:166,
from sketch/weather.ino.cpp:1:
/home/user/.arduino15/packages/m5stack/hardware/esp32/2.0.7/cores/esp32/WString.h:57:9: note: after user-defined conversion: 'String::String(const char*)'
String(const char cstr = "");
^~~~~~
In file included from /home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson.hpp:42,
from /home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson.h:9,
from /home/user/Arduino/M5PaperWeather-master/weather/Weather.h:25,
from /home/user/Arduino/M5PaperWeather-master/weather/Data.h:24,
from /home/user/Arduino/M5PaperWeather-master/weather/weather.ino:26:
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:283:13: note: candidate: 'void ArduinoJson::V6212PB::convertFromJson(ArduinoJson::V6212PB::JsonVariantConst, std::__cxx11::string&)'
inline void convertFromJson(JsonVariantConst src, std::string& dst) {
^~~~~~~~~~~~~~~
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:283:13: note: conversion of argument 2 would be ill-formed:
/home/user/Arduino/libraries/ArduinoJson/src/ArduinoJson/Variant/ConverterImpl.hpp:24:26: error: cannot bind non-const lvalue reference of type 'std::__cxx11::string&' {aka 'std::__cxx11::basic_string&'} to an rvalue of type 'std::__cxx11::string' {aka 'std::__cxx11::basic_string'}
convertFromJson(src, result); // Error here? See https://arduinojson.org/v6/unsupported-as/
^~~~~~
In file included from /home/user/.arduino15/packages/m5stack/tools/xtensa-esp32-elf-gcc/gcc8_4_0-esp-2021r2-patch5/xtensa-esp32-elf/include/c++/8.4.0/string:52,
from /home/user/.arduino15/packages/m5stack/tools/xtensa-esp32-elf-gcc/gcc8_4_0-esp-2021r2-patch5/xtensa-esp32-elf/include/c++/8.4.0/stdexcept:39,
from /home/user/.arduino15/packages/m5stack/tools/xtensa-esp32-elf-gcc/gcc8_4_0-esp-2021r2-patch5/xtensa-esp32-elf/include/c++/8.4.0/array:39,
from /home/user/.arduino15/packages/m5stack/tools/xtensa-esp32-elf-gcc/gcc8_4_0-esp-2021r2-patch5/xtensa-esp32-elf/include/c++/8.4.0/tuple:39,
from /home/user/.arduino15/packages/m5stack/tools/xtensa-esp32-elf-gcc/gcc8_4_0-esp-2021r2-patch5/xtensa-esp32-elf/include/c++/8.4.0/functional:54,
from /home/user/.arduino15/packages/m5stack/hardware/esp32/2.0.7/cores/esp32/HardwareSerial.h:49,
from /home/user/.arduino15/packages/m5stack/hardware/esp32/2.0.7/cores/esp32/Arduino.h:174,
from sketch/weather.ino.cpp:1:
/home/user/.arduino15/packages/m5stack/tools/xtensa-esp32-elf-gcc/gcc8_4_0-esp-2021r2-patch5/xtensa-esp32-elf/include/c++/8.4.0/bits/basic_string.h:514:7: note: after user-defined conversion: 'std::__cxx11::basic_string<_CharT, _Traits, _Alloc>::basic_string(const _CharT, const _Alloc&) [with _CharT = char; _Traits = std::char_traits; _Alloc = std::allocator]'
basic_string(const _CharT* __s, const _Alloc& __a = _Alloc())
^~~~~~~~~~~~
Multiple libraries were found for "WiFiClient.h"
Used: /home/user/.arduino15/packages/m5stack/hardware/esp32/2.0.7/libraries/WiFi
Not used: /home/user/arduino-1.8.15/libraries/WiFi
Multiple libraries were found for "SD.h"
Used: /home/user/.arduino15/packages/m5stack/hardware/esp32/2.0.7/libraries/SD
Not used: /home/user/arduino-1.8.15/libraries/SD
exit status 1
'MyData' was not declared in this scope

Hi,
great script, I got it to work. What does not work, is that the data update themselves. I am not so good in arduino, what could be the reason?

Dear @Bastelschlumpf , is there any chance to fix the code?
Unfortunately it cannot be compiled, there are multiple issues.

Thank you in advance.

Why are the icons of the type const uint8_t in the Icons.h file but the DrawIcons function in the Display.h uses const uint16_t *icon ?

In file included from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\M5PaperWeather\weather\Weather.h: In member function 'bool Weather::Fill(const JsonObject&)':
D:\Arduino\M5PaperWeather\weather\Weather.h:127:75: warning: 'typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char*>::value, const char*>::type ArduinoJson6185_91::MemberProxy<TParent, TStringRef>::as() const [with T = char*; TObject = ArduinoJson6185_91::ElementProxy<ArduinoJson6185_91::MemberProxy<ArduinoJson6185_91::MemberProxy<ArduinoJson6185_91::ObjectRef, const char*>, const char*> >; TStringRef = const char*; typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char*>::value, const char*>::type = const char*]' is deprecated: Replace as<char*>() with as<const char*>() [-Wdeprecated-declarations]
hourlyMain[0] = root["current"]["weather"][0]["main"].as<char >();
^
In file included from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/JsonDocument.hpp:9,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/BasicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/DynamicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.hpp:21,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.h:9,
from D:\Arduino\M5PaperWeather\weather\Weather.h:25,
from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Object/MemberProxy.hpp:79:7: note: declared here
as() const {
^~
In file included from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\M5PaperWeather\weather\Weather.h:128:75: warning: 'typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char>::value, const char*>::type ArduinoJson6185_91::MemberProxy<TParent, TStringRef>::as() const [with T = char*; TObject = ArduinoJson6185_91::ElementProxy<ArduinoJson6185_91::MemberProxy<ArduinoJson6185_91::MemberProxy<ArduinoJson6185_91::ObjectRef, const char*>, const char*> >; TStringRef = const char*; typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char*>::value, const char*>::type = const char*]' is deprecated: Replace as<char*>() with as<const char*>() [-Wdeprecated-declarations]
hourlyIcon[0] = root["current"]["weather"][0]["icon"].as<char >();
^
In file included from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/JsonDocument.hpp:9,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/BasicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/DynamicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.hpp:21,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.h:9,
from D:\Arduino\M5PaperWeather\weather\Weather.h:25,
from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Object/MemberProxy.hpp:79:7: note: declared here
as() const {
^~
In file included from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\M5PaperWeather\weather\Weather.h:133:84: warning: 'typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char>::value, const char*>::type ArduinoJson6185_91::MemberProxy<TParent, TStringRef>::as() const [with T = char*; TObject = ArduinoJson6185_91::ElementProxy<ArduinoJson6185_91::MemberProxy<ArduinoJson6185_91::ElementProxy<ArduinoJson6185_91::ArrayRef>, const char*> >; TStringRef = const char*; typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char*>::value, const char*>::type = const char*]' is deprecated: Replace as<char*>() with as<const char*>() [-Wdeprecated-declarations]
hourlyMain[i] = hourly_list[i - 1]["weather"][0]["main"].as<char >();
^
In file included from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/JsonDocument.hpp:9,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/BasicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/DynamicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.hpp:21,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.h:9,
from D:\Arduino\M5PaperWeather\weather\Weather.h:25,
from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Object/MemberProxy.hpp:79:7: note: declared here
as() const {
^~
In file included from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\M5PaperWeather\weather\Weather.h:134:84: warning: 'typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char>::value, const char*>::type ArduinoJson6185_91::MemberProxy<TParent, TStringRef>::as() const [with T = char*; TObject = ArduinoJson6185_91::ElementProxy<ArduinoJson6185_91::MemberProxy<ArduinoJson6185_91::ElementProxy<ArduinoJson6185_91::ArrayRef>, const char*> >; TStringRef = const char*; typename ArduinoJson6185_91::enable_if<ArduinoJson6185_91::is_same<T, char*>::value, const char*>::type = const char*]' is deprecated: Replace as<char*>() with as<const char*>() [-Wdeprecated-declarations]
hourlyIcon[i] = hourly_list[i - 1]["weather"][0]["icon"].as<char *>();
^
In file included from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/JsonDocument.hpp:9,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/BasicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Document/DynamicJsonDocument.hpp:7,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.hpp:21,
from D:\Arduino\libraries\ArduinoJson\src/ArduinoJson.h:9,
from D:\Arduino\M5PaperWeather\weather\Weather.h:25,
from D:\Arduino\M5PaperWeather\weather\Data.h:24,
from D:\Arduino\M5PaperWeather\weather\weather.ino:30:
D:\Arduino\libraries\ArduinoJson\src/ArduinoJson/Object/MemberProxy.hpp:79:7: note: declared here
as() const {
^~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp: In member function 'void M5EPD::BatteryADCBegin()':
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:5:25: error: 'ADC1_GPIO35_CHANNEL' was not declared in this scope
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:90:31: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc1_config_channel_atten(BAT_ADC_CHANNEL, ADC_ATTEN_DB_11);
^~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:5:25: note: suggested alternative: 'ADC1_CHANNEL_7'
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:90:31: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc1_config_channel_atten(BAT_ADC_CHANNEL, ADC_ATTEN_DB_11);
^~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp: In member function 'uint32_t M5EPD::getBatteryRaw()':
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:5:25: error: 'ADC1_GPIO35_CHANNEL' was not declared in this scope
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:100:25: note: in expansion of macro 'BAT_ADC_CHANNEL'
return adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:5:25: note: suggested alternative: 'ADC1_CHANNEL_7'
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:100:25: note: in expansion of macro 'BAT_ADC_CHANNEL'
return adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp: In member function 'uint32_t M5EPD::getBatteryVoltage()':
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:5:25: error: 'ADC1_GPIO35_CHANNEL' was not declared in this scope
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:111:39: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc_raw_value += adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:5:25: note: suggested alternative: 'ADC1_CHANNEL_7'
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
D:\Arduino\libraries\M5EPD\src\M5EPD.cpp:111:39: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc_raw_value += adc1_get_raw(BAT_ADC_CHANNEL);

M5paper display remains clean, no updates

I'm curious where I got the weather icon

any one get this error or know what to do about it??

In file included from /Users/andrew/Documents/Arduino/M5PaperProjects/M5PaperWeather-master/weather/Weather.h:26,
from /Users/andrew/Documents/Arduino/M5PaperProjects/M5PaperWeather-master/weather/Data.h:24,
from /Users/andrew/Documents/Arduino/M5PaperProjects/M5PaperWeather-master/weather/weather.ino:26:
/Users/andrew/Documents/Arduino/M5PaperProjects/M5PaperWeather-master/weather/Utils.h: In function 'time_t GetRTCTime()':
/Users/andrew/Documents/Arduino/M5PaperProjects/M5PaperWeather-master/weather/Utils.h:46:3: error: 'tmElements_t' was not declared in this scope
tmElements_t tmSet;

Vers nice work, thanks for that. unfortunately my display is full of errors and weather is not properly displayed.

I found that

uri += "/data/2.5/onecall";

onecall is not free anymore with new accounts.
We need two requests now and only get the current weather and a 5d forecast with 3h timestamps.

uri += "/data/2.5/weather";
uri += "/data/2.5/forecast";

Do you consider an update on this?

What libraries are required to get this to build?

Currently have libraries: Time, Moonrise, M5GFX, M5EPD, ArduinoJson, Wifi

Using Arduino IDE 1.8.6 on MacOS

/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp: In member function 'void M5EPD::BatteryADCBegin()':
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:5:25: error: 'ADC1_GPIO35_CHANNEL' was not declared in this scope
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:90:31: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc1_config_channel_atten(BAT_ADC_CHANNEL, ADC_ATTEN_DB_11);
^~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:5:25: note: suggested alternative: 'ADC1_CHANNEL_7'
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:90:31: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc1_config_channel_atten(BAT_ADC_CHANNEL, ADC_ATTEN_DB_11);
^~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp: In member function 'uint32_t M5EPD::getBatteryRaw()':
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:5:25: error: 'ADC1_GPIO35_CHANNEL' was not declared in this scope
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:100:25: note: in expansion of macro 'BAT_ADC_CHANNEL'
return adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:5:25: note: suggested alternative: 'ADC1_CHANNEL_7'
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:100:25: note: in expansion of macro 'BAT_ADC_CHANNEL'
return adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp: In member function 'uint32_t M5EPD::getBatteryVoltage()':
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:5:25: error: 'ADC1_GPIO35_CHANNEL' was not declared in this scope
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:111:39: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc_raw_value += adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:5:25: note: suggested alternative: 'ADC1_CHANNEL_7'
#define BAT_ADC_CHANNEL ADC1_GPIO35_CHANNEL
^~~~~~~~~~~~~~~~~~~
/Users/bfaist/Documents/Arduino/libraries/M5EPD/src/M5EPD.cpp:111:39: note: in expansion of macro 'BAT_ADC_CHANNEL'
adc_raw_value += adc1_get_raw(BAT_ADC_CHANNEL);
^~~~~~~~~~~~~~~

I have installed all libraries and all required to get my M5Paper detected and loaded on Arduino. I am able to upload other sketches to my device, except this one. Attached to this post is a txt file with the results of Terminal posting error.
M5Weather station error report.txt

Hello,

I am really stuck without understanding, I have added Time library https://playground.arduino.cc/Code/Time/ but I am still unable to compile it. Do you have any tips to move as it seems pretty straight forward ?

Thanks

In file included from /home/sam/M5PaperWeather/weather/Weather.h:26,
from /home/sam/M5PaperWeather/weather/Data.h:24,
from /home/sam/M5PaperWeather/weather/weather.ino:26:
/home/sam/M5PaperWeather/weather/Utils.h:30:10: fatal error: TimeLib.h: No such file or directory
#include <TimeLib.h>
^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SD.h"
Used: /home/sam/.arduino15/packages/m5stack/hardware/esp32/2.0.6/libraries/SD
Not used: /home/sam/.arduino15/libraries/SD
Not used: /home/sam/Arduino/libraries/SD-1.2.4
exit status 1

Compilation error: TimeLib.h: No such file or directory

I included all the relevant libraries referenced and have been unsuccessful in compiling using M5EDP version 0.1.4 & M5Stack version 2.0.4. Not sure what I am missing here especially the first error about MyData not declared in scope as this makes no sense as "Time.h" is the only header complaining about this. Ive probably missed something obvious but would appreciate any pointers as to what I am missing.

Here are a few of the issues Im running into

First issue

In file included from /home/pi/Arduino/weather/Utils.h:23,
                 from /home/pi/Arduino/weather/Weather.h:26,
                 from /home/pi/Arduino/weather/Data.h:24,
                 from /home/pi/Arduino/weather/weather.ino:25:
Time.h:26:21: error: 'MyData' was not declared in this scope
 bool SetRTCDateTime(MyData &myData)
                     ^~~~~~
/home/pi/Arduino/weather/Time.h:26:21: note: suggested alternative: 'FT_Data'
 bool SetRTCDateTime(MyData &myData)
                     ^~~~~~
                     FT_Data

Second issue

In file included from /home/pi/Arduino/weather/Data.h:24,
                 from /home/pi/Arduino/weather/weather.ino:25:
/home/pi/Arduino/weather/Weather.h: In member function 'bool Weather::Fill(const JsonObject&)':
/home/pi/Arduino/weather/Weather.h:117:75: warning: 'typename ArduinoJson6194_F1::enable_if<ArduinoJson6194_F1::is_same<T, char*>::value, const char*>::type ArduinoJson6194_F1::MemberProxy<TParent, TStringRef>::as() const [with T = char*; TObject = ArduinoJson6194_F1::ElementProxy<ArduinoJson6194_F1::MemberProxy<ArduinoJson6194_F1::MemberProxy<ArduinoJson6194_F1::ObjectRef, const char*>, const char*> >; TStringRef = const char*; typename ArduinoJson6194_F1::enable_if<ArduinoJson6194_F1::is_same<T, char*>::value, const char*>::type = const char*]' is deprecated: Replace as<char*>() with as<const char*>() [-Wdeprecated-declarations]
       hourlyMain[0]    = root["current"]["weather"][0]["main"].as<char *>();
                                                                           ^
In file included from /home/pi/Arduino/libraries/ArduinoJson/src/ArduinoJson/Document/JsonDocument.hpp:9,
                 from /home/pi/Arduino/libraries/ArduinoJson/src/ArduinoJson/Document/BasicJsonDocument.hpp:7,
                 from /home/pi/Arduino/libraries/ArduinoJson/src/ArduinoJson/Document/DynamicJsonDocument.hpp:7,
                 from /home/pi/Arduino/libraries/ArduinoJson/src/ArduinoJson.hpp:28,
                 from /home/pi/Arduino/libraries/ArduinoJson/src/ArduinoJson.h:9,
                 from /home/pi/Arduino/weather/Weather.h:25,
                 from /home/pi/Arduino/weather/Data.h:24,
                 from /home/pi/Arduino/weather/weather.ino:25:
/home/pi/Arduino/libraries/ArduinoJson/src/ArduinoJson/Object/MemberProxy.hpp:79:7: note: declared here
       as() const {
       ^~

Third issue

/home/pi/Arduino/weather/weather.ino: In function 'void setup()':
weather:52:31: error: 'SetRTCDateTime' cannot be used as a function
          SetRTCDateTime(myData);
                               ^