This is the L4.verified git repository with formal specifications and proofs for the seL4 microkernel.
Most proofs in this repository are conducted in the interactive proof assistant Isabelle/HOL. For an introduction to Isabelle, see its official website and documentation.
DOIs for citing recent releases of this repository:
This repository is meant to be used as part of a Google repo setup. Instead of cloning it directly, please go to the following repository and follow the instructions there:
https://github.com/seL4/verification-manifest
For setting up the theorem prover and other dependencies, please see the section Dependencies below.
Contributions to this repository are welcome.
Please read CONTRIBUTING.md
for details.
The repository is organised as follows.
-
spec
: a number of different formal specifications of seL4abstract
: the functional abstract specification of seL4haskell
: Haskell model of the seL4 kernel, kept in sync with the C codedesign
: the Haskell-generated design-level specification of seL4machine
: the machine interface of these two specificationscspec
: the entry point for automatically translating the seL4 C code into IsabellecapDL
: a specification of seL4 that abstracts from memory content and concrete execution behaviour, modelling the protection state of the system in terms of capabilities. This specification corresponds to the capability distribution language capDL that can be used to initialise user-level systems on top of seL4.take-grant
: a formalisation of the classical take-grant security model, applied to seL4, but not connected to the code of seL4.
-
proof
: the seL4 proofsinvariant-abstract
: invariants of the seL4 abstract specificationrefine
: refinement between abstract and design specificationscrefine
: refinement between design specification and C semanticsaccess-control
: integrity and authority confinement proofsinfoflow
: confidentiality and intransitive non-interference proofsasmrefine
: Isabelle/HOL part of the seL4 binary verificationdrefine
: refinement between capDL and abstract specificationsep-capDL
: a separation logic instance on capDLcapDL-api
: separation logic specifications of selected seL4 APIs
-
lib
: generic proof libraries, proof methods and tools. Among these, further libraries for fixed-size machine words, a formalisation of state monads with nondeterminism and exceptions, a generic verification condition generator for monads, a recursive invariant prover for these (crunch
), an abstract separation logic formalisation, a prototype of the Eisbach proof method language, a prototypelevity
refactoring tool, and others. -
tools
: larger, self-contained proof toolsasmrefine
: the generic Isabelle/HOL part of the binary verification toolc-parser
: a parser from C into the Simpl language in Isabelle/HOL. Includes a C memory model.autocorres
: an automated, proof-producing abstraction tool from C into higher-level Isabelle/HOL functions, based on the C parser abovehaskell-translator
: a basic python script for converting the Haskell prototype of seL4 into the executable design specification in Isabelle/HOL.
-
misc
: miscellaneous scripts and build tools -
camkes
: an initial formalisation of the CAmkES component platform on seL4. Work in progress. -
sys-init
: specification of a capDL-based, user-level system initialiser for seL4, with proof that the specification leads to correctly initialised systems.
Almost all proofs in this repository should work within 4GB of RAM. Proofs involving the C refinement, will usually need the 64bit mode of polyml and about 16GB of RAM.
The proofs distribute reasonably well over multiple cores, up to about 8 cores are useful.
The proofs in this repository use Isabelle2016-1
. A copy of Isabelle
is included in the repository setup.
The dependencies for installing Isabelle in this repository are
- Perl 5.x with
libwww-perl
- Python 2.x
- LaTeX, for instance on Ubuntu 14.04
sudo apt-get install texlive-fonts-recommended texlive-latex-extra texlive-metapost texlive-bibtex-extra
- 32-bit C/C++ standard libraries on 64-bit platforms (optional)
For running the standalone version of the C Parser you will additionally need
- MLton ML compiler (package
mlton-compiler
on Ubuntu)
For building the Haskell kernel model, the Haskell build tool stack is
required. The Haskell kernel Makefile
will use stack
to obtain appropriate
versions of ghc
and cabal-install
. Note that this repository does not
contain the QEmu interface for actually running the model.
For running the C proofs, you need a working C preprocessor setup for the seL4 repository.
On Linux: the best way to make sure you have everything is to install the full build environment for seL4:
- seL4 development tool chain on Debian and Ubuntu
make
version 3.81 or higher
You can get away with avoiding a full cross compiler setup form the above, but you will need at least these:
sudo apt-get install python-pip python-dev libxml2-utils
sudo pip install sel4-deps
On MacOS: here it is harder to get a full cross-compiler setup going. For normal proof development, a full setup is not necessary, though. You mostly need a gcc-compatible C pre-processor and python. Try the following steps:
- install
XCode
from the AppStore and its command line tools. If you are running MacPorts, you have these already. Otherwise, after you have XCode installed, rungcc --version
in a terminal window. If it reports a version, you're set. Otherwise it should pop up a window and prompt for installation of the command line tools. - install the seL4 Python dependencies, for instance using
sudo easy_install sel4-deps
.easy_install
is part of Python'ssetuptools
. - install the
misc/scripts/cpp
wrapper for clang, by putting it in~/bin
, or somewhere else in yourPATH
.
After the repository is set up in Google repo, you should have following
directory structure, where l4v
is the repository you are currently looking
at:
verification/
isabelle/
l4v/
seL4/
To set up Isabelle for use in l4v/
, assuming you have no previous
installation of Isabelle, run the following commands in the directory
verification/l4v/
:
mkdir -p ~/.isabelle/etc
cp -i misc/etc/settings ~/.isabelle/etc/settings
./isabelle/bin/isabelle components -a
./isabelle/bin/isabelle jedit -bf
./isabelle/bin/isabelle build -bv HOL-Word
These commands perform the following steps:
- create an Isabelle user settings directory.
- install L4.verified Isabelle settings.
These settings initialise the Isabelle installation to use the standard
Isabelle
contrib
tools from the Munich Isabelle repository and set up paths such that multiple Isabelle repository installations can be used side by side without interfering with each other. - download
contrib
components from the Munich repository. This includes Scala, a Java JDK, PolyML, and multiple external provers. You should download these, even if you have these tools previously installed elsewhere to make sure you have the right versions. Depending on your internet connection, this may take some time. - compile and build the Isabelle PIDE jEdit interface.
- build basic Isabelle images, including
HOL-Word
to ensure that the installation works. This may take a few minutes.
Alternatively, it is possible to use the official Isabelle2016-1 release
bundle for your platform from the Isabelle website. In this case, the
installation steps above can be skipped, and you would replace the directory
verification/isabelle/
with a symbolic link to the Isabelle home directory
of the release version. Note that this is not recommended for development,
since Google repo will overwrite this link when you synchronise repositories
and Isabelle upgrades will have to be performed manually as development
progresses.
If Isabelle is set up correctly, a full test for the proofs in this repository can be run with the command
./run_tests
from the directory l4v/
.
Proof sessions that do not depend on the C code can be built directly with
./isabelle/bin/isabelle build -d . -v -b <session name>
from the directory l4v/
. For available sessions, see the corresponding
ROOT
files in this repository. There is roughly one session corresponding to
each major directory in the repository.
For proof sessions that depend on the C code, for instance CSpec
, CRefine
,
or CBaseRefine
, go for instance to the directory l4v/proof
and run
make CRefine
See the HEAPS
variable in the corresponding Makefile
for available
targets. The make
command should also work for sessions that do not depend
on C code.
For interactively exploring, say the invariant proof of the abstract specification with a pre-built logic image for the abstract specification, run
./isabelle/bin/isabelle jedit -d . -l ASpec
and open one of the files in spec/invariant-abstract
.
The files in this repository are released under standard open source
licenses. Please see the individual file headers and
LICENSE_GPLv2.txt
and
LICENSE_BSD2.txt
files for details.