This repository contains code for TTGO T-Display board to let it use as dashboard for any VESC based ESC. Compatible with FW5.3

Display battery level, power and speed based on VESC data. Transparent BLE-UART proxy for VESC tool.

1. Modify src/config.h according to your specifications.
2. Connect 3V or 5V pin to VESC.
   1. Optional: I recommend you to use 10µF capacitor between V+ and G pin to avoid unstable behavior.
3. Connect G pin to VESC Ground.
4. Connect RX pin to VESC TX and TX pin to VESC RX.
5. Now you can use T-Display as dashboard and bluetooth relay.

You can also install buzzer, but case in this repo doesn't have a space for it.

Use buttons

I'm using the first button to control the light, so pin name is LIGHT_PIN. The button can be used in two modes: as switch and pass-through.

In Switch mode button will toggle the flag, while flag is TRUE, LIGHT_PIN will be HIGH. In pass-through mode button will pass-through the state. Normal state is HIGH.