Welcome to the MP JWT Sample Application! This application demonstrates some of the capabilities of the MicroProfile JWT specification, specifically the new features of the MP JWT 1.2 specification and the corresponding feature in the Open Liberty application server.
- Run it now
- MP JWT 1.2 features
- Project overview
- Application overview
- Building the application
- Running the application
- Interacting with the application
- Samples
- Troubleshooting
Much of the source for this sample application (e.g. Java classes and PEM files) is taken from the MicroProfile JWT TCK project under the Apache 2.0 license.
- Clone this repository
- In the project root, run
$ mvn package
$ mvn liberty:dev
- Interact with the app
- Type
Ctrl + C
to stop the server.
The MicroProfile JWT specification allows using a JSON Web Token for authenticating and authorizing requests to a service. MicroProfile JWT 1.2 adds some new capabilities that were not in previous releases:
- New MicroProfile Config properties
- Support for JSON Web Encryption (JWE) tokens
- Enhanced signature algorithms
Version 1.2 of the MicroProfile JWT specification adds the following MicroProfile Config properties to control different aspects of JWT validation:
- mp.jwt.token.header
- mp.jwt.token.cookie
- mp.jwt.verify.audiences
- mp.jwt.decrypt.key.location
- mp.jwt.verify.publickey.algorithm
This property allows you to control the HTTP request header that is expected to contain a JWT. You can specify either "Authorization"
(default) or "Cookie"
.
This property allows you to specify the name of the cookie that is expected to contain a JWT. The default value is "Bearer"
if not specified.
Note: The mp.jwt.token.header
MP Config property must be set to "Cookie"
for the mp.jwt.token.cookie
property to be recognized.
This property allows you to create list of allowable audience values. At least one of these must be found in the "aud"
claim of the JWT. Previously, this had to be configured in the server.xml
file. Now you can configure the audiences in the MicroProfile Config property as follows:
mp.jwt.verify.audiences=conferenceService,adminService
To support JSON Web Encryption tokens, this property allows you to specify the location of the Key Management Key. This is the private key that is used to decrypt the Content Encryption Key, which is then used to decrypt the JWE ciphertext. The private key must correspond to the public key that is used to encrypt the Content Encryption Key.
mp.jwt.decrypt.key.location=/path/to/privatekey.pem
Note: When the mp.jwt.decrypt.key.location
property is specified, the application will only accept tokens in JWE format; tokens in JWS format will be rejected. Inversely, if this property is not specified, the application will only accept tokens in JWS format.
Also note: The payload of JWE tokens must be a nested JWT in JSON Web Signature (JWS) format. JWE tokens whose payload is not a nested JWS will be rejected.
This property allows you to control the public key signature algorithm that is supported by the MP JWT endpoint. The default value is "RS256"
if not specified. Previously, this had to be configured in the server.xml
file. Now you can configure the public key algorithm used for verification of the JWT in the MicroProfile Config property as follows:
mp.jwt.verify.publickey.algorithm=ES256
JSON Web Encryption tokens (defined in RFC 7516) represent "encrypted content using JSON-based data structures". They are JWT structures that have encrypted payloads, and therefore offer more security over JWS structures whose payloads are simply Base64-encoded.
The MP JWT 1.2 specification adds support for the ES256 signature algorithm, while Open Liberty also adds support for using the RS384, RS512, HS384, HS512, ES256, ES384, and the ES512 signature algorithms.
The project makes use of the following technologies:
- Maven
- JAX-RS
- Eclipse MicroProfile
- Open Liberty
- Liberty Maven plugin
Eclipse MicroProfile is an Enterprise Java environment tailor-made for microservice architectures. The project is a collection of various specifications for technologies such as CDI, Metrics, Health, JAX-RS, JWT, Fault Tolerance, and others.
Open Liberty is IBM's open source Java application server. The server is a lightweight, open framework specifically designed for cloud-native environments. The product is freely available on GitHub.
The Liberty Maven plugin allows you to manage a Liberty server as part of your Maven build lifecycle. This sample application makes use of the plugin to package the app and deploy it onto a Liberty server with as little as one command.
The highlights of the application are:
The JAX-RS resource is a Java class that defines the endpoint and security constraints for that resource:
@Path("/endp")
@DenyAll
@RequestScoped
public class RolesEndpoint {
@GET
@Path("/echo")
@RolesAllowed("Echoer")
public String echoInput(@Context SecurityContext sec, @QueryParam("input") String input) {
Principal user = sec.getUserPrincipal();
return input + ", user="+user.getName();
}
}
The configuration of the resource is pretty simple. In a nutshell, this resource provides a /endp/echo
endpoint that serves HTTP GET
requests to users in the "Echoer"
role. If authorized, the endpoint returns a string that contains the Principal name of the authenticated user alongside the value of the "input"
query parameter that is sent in the request. If the user is not authorized, a 401 will be returned.
With the mpJwt-1.2
or microProfile-4.0
feature enabled, authorization will be determined based on the MP JWT configuration in the server and application. Any authorized request to this endpoint must therefore include a valid JWT in accordance with the MP JWT and application configurations.
With Open Liberty, the server configuration isn't much more than enabling a feature:
<featureManager>
<feature>microProfile-4.0</feature>
</featureManager>
This is the only server configuration typically necessary to use MP JWT 1.2 functionality. The mpJwt-1.2
feature can also be specified on its own if the other MicroProfile 4.0 features aren’t needed.
The MP Config source contains the remaining configuration properties needed for the application to work:
mp.jwt.decrypt.key.location=/privateKey.pem
mp.jwt.verify.audiences=s6BhdRkqt3,testing
mp.jwt.verify.publickey.location=/publicKey.pem
mp.jwt.verify.issuer=https://server.example.com
In our case, these properties are defined in the META-INF/microprofile-config.properties
file.
The New MicroProfile Config properties section provides some detail about these properties and their usage.
The MP JWT feature will automatically look for (and require) a JWT in requests sent to protected resources (e.g. paths with @RolesAllowed
defined). Several checks are made to validate the JWT and authorize the request.
To be authorized, inbound JWTs must include a claim whose value can be mapped to whatever security roles are defined by the application.
The endpoint provided in this sample application specifies:
@RolesAllowed("Echoer")
This means that for an inbound JWT to be considered valid, the JWT must have a claim that indicates the user is in the "Echoer"
role.
By default, the MP JWT feature will map the values in the "groups"
claim of the JWT to roles. For example, assume your JWT includes the claim:
"groups": ["Echoer","Tester","group1","group2"],...
By default, the MP JWT feature will consider each of those values as roles that the user is in. Since the value "Echoer"
is included in that list, the token will be considered authorized.
Note: If your JWT does not include a "groups"
claim, you'll have to add the groupNameAttribute
to your <mpJwt>
configuration in server.xml
. The value of the attribute should be set to the claim that contains the roles for the user.
For example, assume your JWT does not have a "groups"
claim. Instead it has:
"roles": ["Echoer"],...
To successfully validate the token, you would have to add the following to the server.xml
:
<mpJwt id="myMpJwt" groupNameAttribute="roles" ... />
The inbound JWT must contain some kind of user identifier - a value that can be used to uniquely identify the user within the realm of the application. In practice this is typically something like an email address or UUID. If an identifier cannot be found, the JWT will be rejected.
The MP JWT specification requires that a JWT contain a "upn"
claim to use as the user identifier. For JWTs that are not MP JWT compliant, a "sub"
(subject) claim is typically present that can be used for the same purpose.
Note: If the JWT does not contain a "upn"
claim, you'll have to add the userNameAttribute
to your <mpJwt>
configuration in server.xml
. The value of the attribute should be set to the claim whose value should be used to uniquely identify the user.
For example, assume your JWT does not have a "upn"
claim, but does have a "sub"
claim:
"sub": "[email protected]",...
To successfully validate the token, you would have to add the following to the server.xml
:
<mpJwt id="myMpJwt" userNameAttribute="sub" ... />
This is a Maven application, so building it should simply require the mvn package
command:
$ mvn package
The application can be run a number of ways using the Liberty Maven plugin:
Dev mode allows you to make hot changes to your application code while the app and server are still running.
To run dev mode, run the liberty:dev
goal:
$ mvn liberty:dev
This goal will compile and package your application, download an Open Liberty environment if this is the first time running the command, deploy the application onto the server, and start the server.
To use the hot change capabilities of the plugin, all that is required is to modify and save a file within the application. As soon as the file is saved, the Liberty Maven plugin will recompile, repackage, and redeploy the app onto the running server. This is all done automatically without the need for any other interaction other than saving the file. This includes changes to Java source, MP Config source files, Liberty server config, etc.
This command will run the Liberty server in the foreground of the command line interface. To stop the server and exit dev mode, type Ctrl + C
.
If you want to start the Liberty server in the background so you can continue to use your existing shell, you can run the liberty:start
goal:
$ mvn liberty:start
Once the server is started, the liberty:stop
goal must be run to stop the server:
$ mvn liberty:stop
The liberty:run
goal will run the Liberty server in the foreground of the current shell:
$ mvn liberty:run
This is similar to the liberty:dev
goal, however any changes to the application will not be picked up and deployed automatically. If you make any changes to the application, you will need to use separate Maven commands to repackage and redeploy the app.
Similar to the liberty:dev
goal, type Ctrl + C
to stop the server.
The JAX-RS resource in this application defines a /endp/echo
endpoint. The endpoint has the following constraints:
- Only serves HTTP
GET
requests - Requires authentication
- Authenticated user must be in the
"Echoer"
role
By default the application will be available at http://localhost:9080/endp/echo
.
To authenticate requests to this endpoint, we include a JWT in the request. You can find sample JWTs to try out with the application in the Samples section.
Recommendation: I recommend interacting with the application using Postman. It provides a pretty clear UI for executing HTTP requests, and lets you easily manipulate headers, parameters, and the like. You could also interact with the application in a browser or cURL, depending on your preference.
Invoking the protected resource with a bearer token is done like so:
GET /endp/echo HTTP/1.1
Host: localhost:9080
Authorization: Bearer <JWT>
input=Hello
Here <JWT>
is substituted for an appropriate JWT string. Depending on the application configuration, the JWT must be in either JWS or JWE format. This also assumes that the application is configured to look for the JWT in the Authorization header.
Invoking the protected resource with a JWT in a cookie is done like so:
GET /endp/echo HTTP/1.1
Host: localhost:9080
Cookie: <cookie-name>=<JWT>
input=Hello
Here <cookie-name>
is substituted for the expected cookie name and <JWT>
is substituted for an appropriate JWT string.
A successful endpoint response should be an HTTP 200
and something like the following response body:
Hello, [email protected]
You can use these sample JWTs to try out requests to the protected resource.
Note: These JWTs will be considered expired by the Liberty server without modification. If you want to use these JWTs, you will need to add the following to the server.xml
file:
<mpJwt id="myMpJwt" clockSkew="99999h" />
Doing so will allow old tokens to be allowed through (or at least not rejected because they were issued too long ago).
Sample JWE:
eyJjdHkiOiJKV1QiLCJlbmMiOiJBMjU2R0NNIiwiYWxnIjoiUlNBLU9BRVAifQ.LgNRqCK6_IyB2gvCGehNx2GMivq1GP5zPeyTJHNvgaNBAKCF2C1Rv8gtibzbHTrVV6zSiwS_beyQJ3rY0t3fb_cfZu1zEstPJ5xO3YIJPOBP0kHniLr49PC5YYwBMcoH3pmnmE11w5_nbHHvSiHnrUT6OCOfZIfVqi0Qw5wy_Cd3W_AMbr1k0ZOEna3lfq8Lyi9vKNxhyBhtNeVcY6MFBe6bJTYDstPQG1QVu6T-NNIp7YyIcfxzNUjvQTH2OCzrGCnb9OyUsz0CxuzKK4yBdSoaE0y_LDHDhiSijQdz9pXl8Bvlqs5fCXbrZxH842sePhV4f21S0GC1Fr9VZCWrvQ.d0vXIob289IEZwMX.nnXIEjQCWPZ3-NPy1O3rzlv79Q4-OPi3JAM3DRT_33E1NFoFYJRLzqqTYwP9r8tcUVNDwgsK0IJ7LBMCvhuyBFFzUwcx9btzr-cKIhQDNl9lG9YuKS50JaRXc3kfi7NaTL4alJuwRUS4ZcvVu637ldFqssfWWqzrd78GIt7dz9YqYAIySjSbGHRzslcKaJjPBS3SjtmfeYEiY2e-cXyBsGusvBMpuOxRKbfKuIQn0CFrP5U-dPvxDQdH09sPHkMaQqGgJHs0bvR8RXTVPn_7UpNmi4cfLbOs6tJ9MqKk5g2Ar8nyWTpYYahAjk77kLEeLXhiMbJPoIQzDJ4dOGLHr06lIGrKjTaSi660BzObSO4-DMX42WKxU7CGlITgpQQp04fw3LRXp56ovhcy0B4vVDqpl12Fo3D5SEE6itiT50cwJnCYRrjxSuJsNaTawCF4hUrQ3WNeM64q2zEeI3Qh5Vsob3gy1dEdDnmikGpdowDNGxYNzrKwqQZc6WMU7_s-Fakj4GhJloxxfj0ulokPlxrRyLh9mdPRbGVDi6RMOjRAdGS2JLEpZMAYFyaTPrE37wJAOuxQ1bUKKzr1QJrcLn4MFtGH8gsJ7aTmbV0Ly1WF1UwlVD6de4vsPQZWG7HP8HbQgn7ZVSo7PddO4xtnTWaKt4TyXVw0bzXt4lw9DiupoBSyKEdxB7vhqSvXRIJ0pnxXfprmO_JXjkBcpMK98r0km0XOG4cPetiqwdMFxUieM1SSDyQUcq2n1zIPhjLOHHWCEpy8QolLu_mCl5N-U-mgpAPQIe-uUgRMGxcPAbiEf5uo-nf2eEMm_0-LnjwJGIUGRU3fKVyBfsITGihTvNRNp2jTFsa8_G-aN7V0QJWZyvWXcZuT7ec0y7XZcH4GCGfmspvk8v3k6c1tIzliSkJ_u5vHYF6E8WGi93i8YJIQFuFn9QbTXn234J9TfGvCjhjWju0_bEDYSHZFGrZffOxbTNaBX0h0TqV7NXHxAy6I2u65uFOWqr1HjQQIdqw-R2Rcvu_skGK9e_yON1RaWWF3zI-_t-1XMWapyl1P-KxyFAB7Ffo-et_S4zkfz9Uam6gxCzkrXFmvpICOyW4dyaS7uGApqYwtCMdZuSAcR7auboi_hKMKJpI8pglWvnMs5fhFaB-zJA6nc4D8xG6ITlBCOnIWHXOFVODlfA9Yb_AnF5OtSIrCQL9DLEqBWH6f2u1ughUPu9niuzOyp8_FkH_ljiI7D305FKQG9TeahyhAZb68o4REHLzxpFHYTHsuxiJnwmwRZx4LxadRyluMa59TajlP_zLA51lGAmSaWrvAXeR_2GhOr1YZw2dB_X2E9apy8wCwQwfLeXjLq_ucGnxd7Uaj__lI-1R4XwEfM2ipQKy5K3AbLnxQsUzDB2ebeDd7-mZ7rZMVGW7NSJsnqu0QCQ2gEnQM5swt5fSw6iMlDlJH-u017QcRPHV5I3e9pFaVUht36DLSudpFu2nKjNSpQ0Qr3muMS5orO2rZgMidOIBmydbiet67EOk6D0-GQY7c0wzRBHsn4ti-fQrNj_k7HJ_wtEBeZ_z4W5Yq8mkGhW0dw97yxl5_wX4rTY-7CjghFZbCqG5VqZwzdJTtN6OQKcD2rqdv_tJHqi8s8ZQK1DGgOqiHVXukJmY6c_FpmK-vlGcBcL06BasutlU8FbMVAUO0mfe7EmIgYqFsnurAmhOduz_krNFKgCVTReXs12ljiJLArbxANatkRaaUC3QhWigkwzJKtIIzmNp42Gk1CXPNA9TRggVlDfHipIrvrKbQ84rISh6X0QtL_hkvE1UPHOihLMvUt2_fSDhqyCpRPBFe53fHaUFQpklnlVfRx0_61wNuMkX4w3apBbD_daIBp2hDQPAiAFVctHIBECJx7pYRWeeXqiu67eI2oEt9iMJwAFjqQn_tLxSSG6rRNJuHiGY4Xu197dLggKA1PwWgGLfr-n472KR_qfTh-4Yo7-mgNmQCOMDzoCYwZbIks1fBA0pKfvL1A0q_AIz2k9b16Uv2BDmPDbKKoocijpFcO2XTwfIGlNqTWlJll7Ba-J5J-oUfNTVc4omPJZNAtSclQsrsqqk7E5HWOMi-YqO5NuCEzABgXnt1wGrbUEwtM--w3OockWAtZrC1AyEl-A-A.MdMK8N5TlroFsT5X9x6vMw
- Requires
privateKey.pem
to decrypt the JWE - Nested JWS is signed using
RS256
- Requires
publicKey.pem
for signature verification of the nested JWS
Sample JWS (RS256):
eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiJ9.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.pN7F04bM9UTqYzF3Ex7Dd-WgX8BxzdUVdaRtqhLW90AeLw5Rmu6m6erHpGeBNmol0iPfQjYB2vxmu_Syt-5v84SR0SNeA23msrO7LPJVr63TKPkiAAVla4JjOh3wHKDwFX7GLqm4G22ht6YMRy3qhFfuEJPKJxfFv2g1XfhW5-A2Sa6tTnjMFsN50dIQNg2NuBeA8WRF383mJVSp6V30OhV2bjj-E_hHWEvnsbQiUko37Z25U_3Z2mLb82_Xz2j33S2keHTggE43n0fCeWWy-7-d4EuUzDIymdXN3VKvZd7svSolau_WWhOvqpTp0g9ITsc1nILj--yxZNeQjrLUXTfEomgrwcwnWtV3fx1UDsDOWrY3T5gorE5KILW8XXyeHZ4X7jpkXZLSBtlD7BvPq0DYrlye8jHvCjXRBgPHUdaq-jfFpexo_JweR8oNJDYL1K2megNixFnq56tiu3lnZyVHyA_ZLnWSLqPbuK6pP2NpMSk-l5g389zTHf13vAnNXgGtsGqsyCQZvp6G-qIlJRC2bi-3AWcObV4BPHFV1EBQVBiTYB6kzILd9uBPvM3vNte-zSZZOTHuzFO-pTGCef8nzKBYRyOEsXYdwlH5fBHgGxrBQi4YjJ8QN_25CqcH4_atKRJ335KXpY9QVkrV7e2FDU-J73-HrYKjXrTh87I
- Requires
publicKey.pem
for signature verification
Sample JWS (ES256):
eyJraWQiOiIvZWNQcml2YXRlS2V5LnBlbSIsInR5cCI6IkpXVCIsImFsZyI6IkVTMjU2In0.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.brc6WPUEFs4B-S7_71XnahvacXO7O1yq_wTREMJd1Gfu-Jpd9WKbcK01ephofvD7virYlhrd-JG9IUWz9RZkvg
- Requires the
mp.jwt.verify.publickey.algorithm
property to be set toES256
becauseRS256
is the default signature algorithm - Requires
ecPublicKey.pem
for signature verification
Problem
If you get a 401 for your request and see this in the server logs:
[INFO] [ERROR ] CWWKS5523E: The MicroProfile JWT feature cannot authenticate the request because the token that is included in the request cannot be validated. CWWKS6025E: The JSON Web Token (JWT) is not valid because its expiration ('exp') claim is either missing or the token expired. The expiration claim is [2021-03-22T15:58:09-0500]. The current time minus the clock skew is [2021-03-24T11:15:59-0500]. The configured clock skew is [300] seconds.
Solution
See the note at the beginning of the Samples section. You'll need to add this to your server.xml
:
<mpJwt id="myMpJwt" clockSkew="99999h" />