Insta360 OSC Get-Started

中文文档

Overview

Insta360 OSC is implemented based on Google OSC Note When your client connected to the AP of Insta360 ONE X、X2、X3、ONE R、ONE RS ，the ip address of the camera is：192.168.42.1 Strongly recomended ： Never send osc/commands request before you get the response of the previous one

HTTP Header required

Content-Type: application/json;charset=utf-8
Accept: application/json
Content-Length: {CONTENT_LENGTH}
X-XSRF-Protected: 1

Get Camera Info

Send a GET request to /osc/info to get basic info of the camera，the frequency of the request is recommend to no more than 1 request per second.

{
	"manufacturer": "Arashi Vision",
	"model": "Insta360 One2",
	"serialNumber": "IXE3619AYS76P6",
	"firmwareVersion": "v1.18.43",
	"supportUrl": "https://www.insta360.com/product/insta360-one2/",
	"endpoints": {
		"httpPort": 80,
		"httpUpdatesPort": 80
	},
	"gps": false,
	"gyro": true,
	"uptime": 48,
	"api": [
		"/osc/info",
		"/osc/state",
		"/osc/checkForUpdates",
		"/osc/commands/execute",
		"/osc/commands/status"
	],
	"apiLevel": [
		2
	],
	"_sensorModuleType": "4K",
	"_vendorVersion": "v1.1_build1"
}

_sensorModuleType : Indicates the current lens module type of the camera, only supported on ONE R. Available values are 4K, 4K_Selfie,Dual_Fisheye,Leica,Leica_Selfie. The Selfie suffix indicates the lens is facing the same direction with touch screen.

Send a POST request to /osc/state to get state of the camera device.

/osc/state response example:

{
	"fingerprint": "FPR_52923",
	"state": {
		"_cardState": "pass",
		"batteryLevel": 1,
		"storageUri": "http://192.168.42.1:80/DCIM/Camera01/"
	}
}

state._cardState：card state of the camera device. Available values:
- noCard: no card detected
- pass: A card detected with supported format
- noSpace: A card detected, but no space left
- invalidFormat:: A card detected, but the format is not supported
- writeProtect: A card detected, with WriteProtected on
- otherError: Other unknown error
state.batteryLevel: batery level of the camera device, values in [0,1]
state.storageUri: the storage path where photos are saved.

Remmber to send request to /osc/info 、/osc/state before starting take picture

Use camera.getOptions command to get options and features of the camera device. photoStitchingSupport and photoStitching are newly added options to tell if the camera device support ondevice-stitching. camera.getOptions request example：

{
  "name":"camera.getOptions",
  "parameters": {
      "optionNames": [
          "iso",
          "isoSupport",
    "shutterSpeed",
    "shutterSpeedSupport",
          "hdr",
          "hdrSupport",
          "totalSpace",
          "remainingSpace",
          "photoStitching",
          "photoStitchingSupport",
          "captureInterval",
          "captureIntervalSupport",
          "captureMode",
          "_videoType",
          "_videoTypeSupport",
          "_timelapseResolution",
          "_timelapseResolutionSupport",
          "_timelapseInterval",
          "_timelapseIntervalSupport",
          "exposureProgram",
          "exposureDelay",
          "exposureDelaySupport",
          "_topBottomCorrection",
          "whiteBalance",
          "whiteBalanceSupport",
          "_dateTime",
          "_MuteEnable",
          "_batteryCapacity",
          "_sysTimestamp"
      ]
  }
}

camera.getOptions response example

{
    "name": "camera.getOptions",
    "state": "done",
    "results": {
        "options": {
            "iso": 100,
            "isoSupport": [
                0,
                100,
                125,
                160,
                200,
                250,
                320,
                400,
                500,
                640,
                800,
                1000,
                1250,
                1600,
                2000,
                2500,
                3200
            ],
            "shutterSpeed": 0.001000,
            "shutterSpeedSupport": [
                0,
                120,
                100,
                80,
                60,
                50,
                40,
                30,
                15,
                8,
                2,
                1,
                0.500000,
                0.200000,
                0.100000,
                0.066660,
                0.033330,
                0.020000,
                0.016660,
                0.010000,
                0.008330,
                0.002000,
                0.001000,
                0.000500,
                0.000250,
                0.000125
            ],
            "hdr": "off",
            "hdrSupport": [
                "off",
                "hdr"
            ],
            "totalSpace": 0,
            "remainingSpace": 0,
            "photoStitching": "none",
            "photoStitchingSupport": [
                "none",
                "ondevice"
            ],
            "captureInterval": 3000,
            "captureIntervalSupport": {
                "minInterval": 3,
                "maxInterval": 120
            },
            "captureMode": "image",
            "_videoType": "normal",
            "_videoTypeSupport": [
                "normal",
                "timelapse"
            ],
            "_timelapseResolution": "5.7K",
            "_timelapseResolutionSupport": [
                "5.7K",
                "8K"
            ],
            "_timelapseInterval": 4000,
            "_timelapseIntervalSupport": [
                200,
                500,
                1000,
                2000,
                4000,
                10000,
                30000,
                60000,
                120000
            ],
            "exposureProgram": 2,
            "exposureDelay": 0,
            "exposureDelaySupport": [
                0,
                3,
                5,
                10,
                15,
                0
            ],
            "_topBottomCorrection": {
                "_topBottomCorrection": 0
            },
            "whiteBalance": "auto",
            "whiteBalanceSupport": [
                "auto",
                "incandescent",
                "fluorescent",
                "daylight",
                "cloudy-daylight"
            ],
            "_dateTime": "2023:03:23 16:05:41",
            "_MuteEnable": {
                "_MuteEnable": 0
            },
            "_batteryCapacity": {
                "powerType": 1,
                "powerLevel": 100
            },
            "_sysTimestamp": 60427274
        }
    }
}

camera.getOptions response example (with error):

{
	"name": "camera.getOptions",
	"state": "error",
	"error": {
		"code": "invalidParameterName ",
		"message": "parameter is not supported."
	}
}

After successfully connected to the camera，execute camera.getOptions to know if the camera firmware support on-device stitching.

{
  "name":"camera.getOptions",
  "parameters": {
      "optionNames": [
          "photoStitchingSupport",
          "photoStitching"
      ]
  }
}

If the on-device stitching is supported, the response will be like below.. Otherwise, the response may contain error or photoStitchingSupport only has value none.

{
  "results": {
      "options": {
           "photoStitchingSupport":["none","ondevice"],
           "photoStitching":"none"
      }
  }
}

iso: value of current iso isoSupport: list of supported iso values hdrSpport: list of supported hdr values hdr: current hdr value totalSpace: total SDcard space in byte remainingSpace: remaining space in byte photoStitchingSupport: list of supported photoStitching modes photoStitching: current photoStitching mode captureIntervalInterval photo time captureIntervalSupportTime Range Supported by Interval photo captureModecapture mode _videoTypevideo submode _videoTypeSupportlist of video submodes _timelapseResolutiontimelapse resolution _timelapseResolutionSupportList of available timelapse resolutions _timelapseIntervaltimelapse interval in millisecond _timelapseIntervalSupportlist of times available for timeLapse exposureProgramExposure mode, 1 -> manual Manual, 2 -> automatic Normal Program, 4 -> shutter priority ShutterPriority, 9 -> ISO priority ISOPriority exposureDelayExposure delay time, after starting shooting, delay for a certain period of time before exposing exposureDelaySupportList of supported exposure delay times _topBottomCorrectionPhoto Level Correction Switch whiteBalanceThe mode name of the current white balance whiteBalanceSupportList supported white balance settings _dateTimeTime format "YYYY:MM:DD HH:MM:SS", for example: "2022:05:06 17:56:15" _MuteEnableMute setting, 0 is no mute, 1 is mute _batteryCapacity"powerType": 0 charging status, 0 means not charging, 1 means charging "powerLevel": 100 battery percentage 100 means 100%, 0 means no battery _sysTimestampSystem timestamp in microseconds(us)

SetOptions/GetOptions allows you to query/set options as need, just put required options in the optionsName array

TakePicture

setOptions

use camera.setOptions command to set params
set HDR mode (Three original images will be returned upon takePicture successfully executed)

{
	"name": "camera.setOptions",
	"parameters": {
		"options": {
			"captureMode":"image",
			"hdr": "hdr",
			"photoStitching": "none" //add this option only when on-device stitching is supported
		}
	}
}

set HDR mode with ondevice-stitching ：(One stitched image with HDR effect will be returned upon takePicture successully executed)

{
	"name": "camera.setOptions",
	"parameters": {
		"options": {
			"captureMode":"image",
			"hdr": "hdr",
			"photoStitching": "ondevice" //add this option only when on-device stitching is supported
		}
	}
}

response on success：

{
    “name”:"camera.setOptions",
    "state":"done"
}

response on error:

{
    "error": {
        "code": "invalidParameterName",
        "message": "Parameter options contains unsupported option captureInterval."
    }
}

takePicture

use camera.takePicture command to start taking picture

{
    "name":"camera.takePicture"
}

response on success：

{
    "name":"camera.takePicture",
    "state":"inProgress",
    "id":"001996",
    "progress":
    {
        "completion":0
    }
}

response on error --camera not activated，Please remind user to download Insta360 official App to activate their camera when get this error:

{
	"name": "camera.takePicture",
	"state": "error",
	"error": {
		"code": "unactivated",
		"message": "Please activate your camera in insta360 official app."
	}
}

response on error-state error，This error often happens when camera is in standby mode or video mode, call setOptions (as described above) and try again：

{
	"name": "camera.takePicture",
	"state": "error",
	"error": {
		"code": "disabledCommand",
		"message": "Currently camera is not working in image mode"
	}
}

check capture status

use /osc/commands/status to check capture statu

{
    "id": "001996"
}

id idendifies the capture task response example:

{
    "name":"camera.takePicture",
    "state":"inProgress",
    "id":"001996",
    "progress":
    {
        "completion":0.5
    }
}

completion 0.5 means the capture progress is 50% now

Get file url and download

check /osc/commands/status repeatedly (recommend once per second ) until state is done in the response make a http request to download the file via fileUrl in the results

{
	"name": "camera.takePicture",
	"state": "done",
	"results": {
		"_fileGroup": ["http://192.168.42.1:80/DCIM/Camera01/IMG_20180101_051113_00_042.jpg"],
		"_localFileGroup": ["/DCIM/Camera01/IMG_20180101_051113_00_042.jpg"],
		"fileUrl": "http://192.168.42.1:80/DCIM/Camera01/IMG_20180101_051113_00_042.jpg"
	}
}

Delete the photo (optional)

use camera.delete to delete the file

{
    "name":"camera.delete",
    "parameters": {
        "fileUrls": [
            "url1",
            "url2",
            "url3",
            ...
            "urln"
        ]
    }
}

response on success：

{
	"name": "camera.delete",
	"results": {
		"fileUrls": []
	},
	"state": "done"
}

response on error:

{
    "error": {
        "code": "invalidParameterValue",
        "message": "Parameter url3 doesn't exist."
    }
}

Get File Lists

use camera.listFiles to list files on the device

{
	"name": "camera.listFiles",
	"parameters": {
		"fileType": "image",
		"entryCount": 1,
		"maxThumbSize": 100
	}
}

{
	"name": "camera.listFiles",
	"state": "done",
	"results": {
		"entries": [{
			"name": "IMG_20180106_180200_00_006.jpg",
			"fileUrl": "http://192.168.42.1:80/DCIM/Camera01/IMG_20180106_180200_00_006.jpg",
			"_localFileUrl": "/DCIM/Camera01/IMG_20180106_180200_00_006.jpg",
			"size": 4494224,
			"width": 6080,
			"height": 3040,
			"dateTimeZone": "2018:01:06 18:02:14+08:00",
			"_thumbnailSize": 37312,
			"isProcessed": true,
			"previewUrl": "",
			"thumbnail": "/9j/2wCEAAI...2Q==\n"//...表示省略
		}],
		"totalEntries": 3
	}
}

Recording

setOptions

set captureMode to video before start recording

{
	"name": "camera.setOptions",
	"parameters": {
		"options": {
			"captureMode":"video"
		}
	}
}

response on success：

{
	"name": "camera.setOptions",
	"state": "done"
}

startCapture

use camera.startCapture to start recording

{
    "name":"camera.stopCapture"
}

stopCapture

use camera.stopCapture to stop recording

{
    "name":"camera.stopCapture"
}

Make a http request to download the video files via fileUrls：

{
	"name": "camera.stopCapture",
	"state": "done",
	"results": {
		"fileUrls": [
			"http://192.168.42.1:80/DCIM/Camera01/VID_20180106_172302_10_005.mp4",
			"http://192.168.42.1:80/DCIM/Camera01/VID_20180106_172302_00_005.mp4"
		],
		"_localFileUrls": [
			"/DCIM/Camera01/VID_20180106_172302_10_005.mp4",
			"/DCIM/Camera01/VID_20180106_172302_00_005.mp4"
		]
	}
}

startTimelapse

Timelapse mode needs to be set before taking pictures

{
    "name":"camera.setOptions",
    "parameters":{
        "options":{
            "captureMode":"video",
            "_videoType":"timelapse",
            "_timelapseInterval":1000
        }
    }
}

Start capture

{
    "name":"camera.startCapture"
}

stopTimelapse

use camera.stopCapture to stop recording

{
    "name":"camera.stopCapture"
}

Make a http request to download the video files via fileUrls：

{
	"name": "camera.stopCapture",
	"state": "done",
	"results": {
		"fileUrls": [
			"http://192.168.42.1:80/DCIM/Camera01/VID_20180106_172302_10_005.mp4",
			"http://192.168.42.1:80/DCIM/Camera01/VID_20180106_172302_00_005.mp4"
		],
		"_localFileUrls": [
			"/DCIM/Camera01/VID_20180106_172302_10_005.mp4",
			"/DCIM/Camera01/VID_20180106_172302_00_005.mp4"
		]
	}
}

avilabss / insta360_osc Goto Github PK

insta360_osc's Introduction

Insta360 OSC Get-Started

Overview

Get Camera Info

TakePicture

setOptions

takePicture

check capture status

Get file url and download

Delete the photo (optional)

Get File Lists

Recording

setOptions

startCapture

stopCapture

startTimelapse

stopTimelapse

insta360_osc's People

Contributors

Recommend Projects

Recommend Topics

Recommend Org