[root@localhost arkcontrol]# ./deploy-server
INFO[0000] [sh -c \cp -rf ./nginx.conf ./nginx-1.8.0/nginx_conf/conf/]
INFO[0000] source="services/service.go:351"
ERRO[0000] error: get private IP failed.
ERRO[0000] error: cannot get private ip
INFO[0000] start nginx source="services/service.go:432"
ERRO[0003] error: get private IP failed.
ERRO[0003] error: cannot get private ip
INFO[0003] Please access http://:90 source="main/main.go:296"
ERRO[0003] error: get private IP failed.
ERRO[0003] error: cannot get private ip
INFO[0003] Please access http://:90 source="main/main.go:297"
ERRO[0003] error: get private IP failed.
ERRO[0003] error: cannot get private ip
INFO[0003] Please access http://:90 source="main/main.go:298"
ERRO[0149] error: get private IP failed.
ERRO[0149] error: cannot get private ip

我是以docker的方式运行ark，最新版本1.0.1，之前的问题都解决了，配置es这里，我选择新建es，就会报下面的错，这里我建议不要固执的执行 sysctl -w vm.max_map_count=262144 这个shell指令，应该做个判断，如果底层os没有设置vm.max_map_count=262144，再报错退出，下面是新建es的报错：

-- 开始配置elasticsearch...
es deploy: exit status 255
exit status 255
安装已结束，自动退出...
time="2018-11-23T06:56:18Z" level=info msg="write config success!" source="services/service.go:178"
time="2018-11-23T06:56:18Z" level=info msg="es install path: /data/Arkcontrol/software, es-5.6.9" source="es/step.go:184"
time="2018-11-23T06:56:18Z" level=debug msg="wait es starting: Get http://172.17.0.2:9202/_cluster/health: dial tcp 172.17.0.2:9202: connect: connection refused" source="es/step.go:196"
time="2018-11-23T06:56:18Z" level=debug msg="wait es starting: unexpected end of JSON input" source="es/step.go:201"
time="2018-11-23T06:56:28Z" level=error msg="init system properties failed, error:exit status 255 stdout: stderr:sysctl: setting key "vm.max_map_count": Read-only file system\n" source="es/step.go:35"
time="2018-11-23T06:56:28Z" level=error msg="es deploy: exit status 255" source="monitor/deploy.go:24"
time="2018-11-23T06:56:28Z" level=error msg="exit status 255" source="services/service.go:121"
time="2018-11-23T06:56:28Z" level=info msg="Clean MySQL dir" source="services/service.go:432"
time="2018-11-23T06:56:31Z" level=warning msg="exit status 1 error:exit status 1 stdout: stderr:sudo: pam_open_session: Permission denied\nsudo: policy plugin failed session initialization\n" source="services/service.go:439"
time="2018-11-23T06:56:31Z" level=info msg="http: Server closed" source="ark-control-init/deploy_server.go:90"

使用现有es，这个也不能成功，报错如下：

-- 开始配置elasticsearch...
es deploy: 检测到es进程已经存在，但是安装目录不存在，是否为僵尸进程？请清理，目录：/data/Arkcontrol/software/es-5.6.9
检测到es进程已经存在，但是安装目录不存在，是否为僵尸进程？请清理，目录：/data/Arkcontrol/software/es-5.6.9
安装已结束，自动退出...
time="2018-11-23T06:08:31Z" level=info msg="Grant user: root, root to mysql" source="services/service.go:420"
time="2018-11-23T06:08:31Z" level=info msg="install mysql success" source="services/service.go:164"
time="2018-11-23T06:08:31Z" level=info msg="write config success!" source="services/service.go:178"
time="2018-11-23T06:08:31Z" level=info msg="es install path: /data/Arkcontrol/software, es-5.6.9" source="es/step.go:184"
time="2018-11-23T06:08:31Z" level=info msg="ES start success!" source="es/step.go:204"
time="2018-11-23T06:08:31Z" level=info msg="es install path: /data/Arkcontrol/software, es-5.6.9" source="es/step.go:218"
time="2018-11-23T06:08:31Z" level=error msg="es deploy: 检测到es进程已经存在，但是安装目录不存在，是否为僵尸进程？请清理，目录：/data/Arkcontrol/software/es-5.6.9" source="monitor/deploy.go:24"
time="2018-11-23T06:08:31Z" level=error msg="检测到es进程已经存在，但是安装目录不存在，是否为僵尸进程？请清理，目录：/data/Arkcontrol/software/es-5.6.9" source="services/service.go:121"
time="2018-11-23T06:08:31Z" level=info msg="Clean MySQL dir" source="services/service.go:432"
time="2018-11-23T06:08:35Z" level=info msg="http: Server closed" source="ark-control-init/deploy_server.go:90"

希望es这块的配置能改进下，新版本我在测试了，感谢各种开发者的辛劳付出

ERROR 1126 (HY000): Can't open shared library '/usr/lib64/mysql/plugin/arkit.so' (errno: 2 /usr/lib64/mysql/plugin/arkit.so: undefined symbol: _Z21my_aes_crypt_free_ctxP15MyEncryptionCTX)

[root@sr-mysql-01 ~]# rpm -qa | grep percona
percona-release-0.1-6.noarch
percona-xtrabackup-2.3.10-1.el7.x86_64

本机上之前已经有安装过，这里安装用的是什么命令？

可以离线部署主从mysql吗

我手动安装了deploy.yaml里所有的包之后，编辑deploy.yaml, 编辑后的deploy.yaml文件内容如下:

package_url: http://mirror.cloud-ark.com:80/public_package/release
dependency:
yums:
- rsync
pt_version: percona-toolkit-3.0.4

还是无限循环输出 - 开始安装Yum依赖... 。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。

我不知道程序正在干什么，可以让用户自己选择是否执行yum 安装 依赖 这一步吗？？？

欢迎使用Arkcontrol产品...
创建[mysql, ark]用户...
Arkcontrol Deploy需要使用2个相邻端口,默认前后端: [9527/9528]
Arkcontrol Server需要使用2个相邻端口,默认前后端: [13306/13307]
请确保端口未被占用,或者是否需要手动指定？[y/N]N
默认安装目录(自动创建): /data, 是否手动指定:[y/N]y
请指定Arkcontrol安装目录/mnt_db/soft/arkcontrol
安装目录以及其父目录必须保证Arkcontrol的用户都能访问，Arkcontrol会默认新建ark和mysql用户，需要确保用户能够cd进入安装目录
error:exit status 127 stdout: stderr:bash: cd: No such file or directory

Hello,
During the arkgate setting, after i copied the "arkgate.so" under the "plugin_dir", also copied the "arkgate.key" under the "arkdb/3321/etc" dir, then i executed INSTALL PLUGIN command and got ERROR 1126.

mysql> install plugin arkgate soname 'arkgate.so';
ERROR 1126 (HY000): Can't open shared library 'arkgate.so' (errno: 0 API version for DAEMON plugin is too different)

Did i do something wrong? And how can i fix it?

es直接初始化安装报错：
shell# ./deploy-server
INFO[0000] [sh -c \cp -rf ./nginx.conf ./nginx-1.8.0/nginx_conf/conf/]
INFO[0000] source="services/service.go:330"
INFO[0000] start nginx source="services/service.go:411"
INFO[0003] Please access http://172.16.3.95:90 source="main/main.go:282"
INFO[0083] {Id:0 ServerIP:172.16.3.95 ServerPort:8090 IsInstallDB:true DBIP:172.16.3.95 DBPort:3316 DBUser:root DBPass:123456 IsInstallES:true ESIP: ESPort:9200 ESUser: ESPass: SourceDir:/ark AgentUser:ark AgentPass:123456 CreateTime:} source="main/main.go:59"
INFO[0083] Init acme start source="services/service.go:224"
INFO[0083] download file ok! source="services/service.go:228"
INFO[0083] [sh -c tar -zxvf ./download/arkcontrol_resource.tar.gz -C ./download]
INFO[0086] install mysql start source="services/service.go:250"
INFO[0086] MySQL already exist: {0 172.16.3.95 8090 true 172.16.3.95 3316 root 123456 true 9200 /ark ark 123456 } source="services/service.go:178"
INFO[0086] install mysql success source="services/service.go:254"
INFO[0086] [sh -c /data/ark/arkdb/cellar/mysql57/bin/mysql -h172.16.3.95 -P3316 -uroot -p123456 < ./download/init.sql]
INFO[0086] write config success! source="services/service.go:264"
ERRO[0086] init system properties failed, exit status 255 source="es/step.go:41"
ERRO[0086] es deploy: exit status 255 source="monitor/deploy.go:22"
ERRO[0086] exit status 255 source="services/service.go:232"
INFO[0086] [sh -c ./nginx-1.8.0/nginx_conf/sbin/nginx -p ./nginx-1.8.0/nginx_conf/ -s stop]
INFO[0086] http: Server closed source="main/main.go:284"
INFO[0086] done source="main/main.go:286"

所以我自己安装了es，并且关了xpack插件，重新安装：

es错误日志信息：
[2018-09-27T17:27:18,410][DEBUG][o.e.a.a.i.t.p.TransportPutIndexTemplateAction] [wl3GU6n] failed to put template [ark_monitor]
org.elasticsearch.index.mapper.MapperParsingException: Failed to parse mapping [default]: Could not convert [value.index] to boolean
at org.elasticsearch.index.mapper.MapperService.internalMerge(MapperService.java:317) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.MapperService.merge(MapperService.java:279) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.metadata.MetaDataIndexTemplateService.validateAndAddTemplate(MetaDataIndexTemplateService.java:255) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.metadata.MetaDataIndexTemplateService.access$300(MetaDataIndexTemplateService.java:65) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.metadata.MetaDataIndexTemplateService$2.execute(MetaDataIndexTemplateService.java:175) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.ClusterStateUpdateTask.execute(ClusterStateUpdateTask.java:45) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.service.MasterService.executeTasks(MasterService.java:639) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.service.MasterService.calculateTaskOutputs(MasterService.java:268) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.service.MasterService.runTasks(MasterService.java:198) [elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.service.MasterService$Batcher.run(MasterService.java:133) [elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.service.TaskBatcher.runIfNotProcessed(TaskBatcher.java:150) [elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.cluster.service.TaskBatcher$BatchedTask.run(TaskBatcher.java:188) [elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingRunnable.run(ThreadContext.java:624) [elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.common.util.concurrent.PrioritizedEsThreadPoolExecutor$TieBreakingPrioritizedRunnable.runAndClean(PrioritizedEsThreadPoolExecutor.java:244) [elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.common.util.concurrent.PrioritizedEsThreadPoolExecutor$TieBreakingPrioritizedRunnable.run(PrioritizedEsThreadPoolExecutor.java:207) [elasticsearch-6.4.1.jar:6.4.1]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [?:1.8.0_40]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [?:1.8.0_40]
at java.lang.Thread.run(Thread.java:745) [?:1.8.0_40]
Caused by: java.lang.IllegalArgumentException: Could not convert [value.index] to boolean
at org.elasticsearch.common.xcontent.support.XContentMapValues.nodeBooleanValue(XContentMapValues.java:433) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.TypeParsers.nodeBooleanValue(TypeParsers.java:59) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.TypeParsers.parseField(TypeParsers.java:232) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.NumberFieldMapper$TypeParser.parse(NumberFieldMapper.java:149) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.ObjectMapper$TypeParser.parseProperties(ObjectMapper.java:278) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.ObjectMapper$TypeParser.parseObjectOrDocumentTypeProperties(ObjectMapper.java:199) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.RootObjectMapper$TypeParser.parse(RootObjectMapper.java:131) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.DocumentMapperParser.parse(DocumentMapperParser.java:112) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.DocumentMapperParser.parse(DocumentMapperParser.java:92) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.DocumentMapperParser.parse(DocumentMapperParser.java:78) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.MapperService.internalMerge(MapperService.java:315) ~[elasticsearch-6.4.1.jar:6.4.1]
... 17 more
Caused by: java.lang.IllegalArgumentException: Failed to parse value [no] as only [true] or [false] are allowed.
at org.elasticsearch.common.Booleans.parseBoolean(Booleans.java:73) ~[elasticsearch-core-6.4.1.jar:6.4.1]
at org.elasticsearch.common.xcontent.support.XContentMapValues.nodeBooleanValue(XContentMapValues.java:438) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.common.xcontent.support.XContentMapValues.nodeBooleanValue(XContentMapValues.java:431) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.TypeParsers.nodeBooleanValue(TypeParsers.java:59) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.TypeParsers.parseField(TypeParsers.java:232) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.NumberFieldMapper$TypeParser.parse(NumberFieldMapper.java:149) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.ObjectMapper$TypeParser.parseProperties(ObjectMapper.java:278) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.ObjectMapper$TypeParser.parseObjectOrDocumentTypeProperties(ObjectMapper.java:199) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.RootObjectMapper$TypeParser.parse(RootObjectMapper.java:131) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.DocumentMapperParser.parse(DocumentMapperParser.java:112) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.DocumentMapperParser.parse(DocumentMapperParser.java:92) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.DocumentMapperParser.parse(DocumentMapperParser.java:78) ~[elasticsearch-6.4.1.jar:6.4.1]
at org.elasticsearch.index.mapper.MapperService.internalMerge(MapperService.java:315) ~[elasticsearch-6.4.1.jar:6.4.1]
... 17 more

请问这个怎么解决？

部署agent客户端时报不支持：
time="2019-03-15T14:45:07+08:00" level=info msg="host info {"hostname":"xxxxxdb03","uptime":1313302,"bootTime":1551319005,"procs":389,"os":"linux","platform":"oracle","platformFamily":"rhel","platformVersion":"6.5","kernelVersion":"3.8.13-16.2.1.el6uek.x86_64","virtualizationSystem":"kvm","virtualizationRole":"host","hostid":"4c4c4544-0054-3810-8038-b3c04f355831"}"

现在1.4.1的版本不支持Oracle Linux。

由于CentOS和RedHat以及Oracle Linux都是同源的，可以适当放开限制。

客户端安装的包差异不大。

希望大佬有计划支持一下，谢谢！

顺利安装各依赖，但是最终提示agent启动失败，日志里没找到具体失败原因

下面是安装过程，已经提示登陆成功

---------------------------------------
| Welcome to the World of Arkcontrol! |
---------------------------------------
欢迎使用Arkcontrol产品...
创建[mysql, ark]用户...
Arkcontrol Deploy需要使用2个相邻端口,默认前后端: [9527/9528]
Arkcontrol Server需要使用2个相邻端口,默认前后端: [13306/13307]
请确保端口未被占用,或者是否需要手动指定？[y/N]N
默认安装目录(自动创建): /data, 是否手动指定:[y/N]N
安装目录已选择: /data/Arkcontrol
- 正在拷贝文件至安装目录. 
- 文件拷贝成功... 
- 安装过程可能需要花费较长时间，请耐心等待...
- 开始安装Nginx...
- Nginx安装成功...
Deploy Server启动中...
请访问 http://192.168.0.253:9527 继续执行安装...
请勿退出本程序,安装结束后会自动退出...
- 开始安装Yum依赖...
- numactl安装成功
- libaio安装成功
- rsync安装成功
- screen安装成功
- libaio-devel安装成功
- perl安装成功
- perl-devel安装成功
- perl-Digest-MD5*安装成功
- perl-Time-HiRes安装成功
- perl-DBD-MySQL安装成功
- 开始安装pt工具...
- pt工具安装成功...
- 开始初始化配置库
- 配置库初始化成功
- 配置监控...可能需要较长时间，请耐心等待
-- 开始配置elasticsearch...
es deploy:  es start failed...
- 监控部署失败：监控不影响主流程，详情参看日志，跳过...
- 监控配置完毕
- 启动Arkcontrol Server...
- 启动成功,等待页面自动跳转...
安装已结束，自动退出...
[root@nexus arkcontrol-v1.4.1-beta-community-linux-x86_64]# ls

问题：默认登陆密码就是web页面最后一项设置的账号密码么？
用此账号密码登陆提示不存在，自己注册之后登陆提示 ““Login failed.”，请问接着要怎么操作？

在主机录入中，包文件大小都反复检查确认正常，但是提示该报错
去掉参数z，tar -xf 正常

如题，详细错误如下：
ERRO[0044] exit status 2 source="services/service.go:232"

录入失败依赖安装出错socat安装失败，请问怎么排查

INFO[0262] write config success! source="services/service.go:279"
ERRO[0264] exit status 1 source="es/step.go:172"
ERRO[0264] es deploy: exit status 1 source="monitor/deploy.go:22"
ERRO[0264] exit status 1 source="services/service.go:246"
INFO[0264] Clean MySQL dir source="services/service.go:223"
INFO[0264] [sh -c /etc/init.d/mysql.server -P 3306 stop]
INFO[0267] [sh -c sudo rm -rf /data/3306]
INFO[0267] [sh -c sudo rm -rf /data/ark/arkdb/multi/3306]
INFO[0267] [sh -c ./nginx-1.8.0/nginx_conf/sbin/nginx -p ./nginx-1.8.0/nginx_conf/ -s stop]
INFO[0267] http: Server closed source="main/main.go:284"
INFO[0267] done source="main/main.go:286"

这是点击语法检查时的日志:
time="2019-12-19T16:37:07+08:00" level=error msg="record not found" source="services/arkit_feedback_service.go:387"

通过什么方式卸载ark_control?

Error 6986: License is invalid or expire, this product is disabled, please check and update the license.

安装报错

具体报错如下：

INFO[0045] Grafana start success!                        source="grafana/deploy.go:168"
INFO[0045] grafana deploy success.                       source="monitor/deploy.go:33"
ERRO[0105] timeout: still not init index template        source="es/step.go:250"
ERRO[0105] init index template failed.                   source="monitor/deploy.go:38"
ERRO[0105] init index template failed.                   source="services/service.go:232"

请问如何解决呢

arkcontrol-v1.4.1-beta-community安装

登陆前注册用户, 后无法登陆提示"Login failed.", 相同用户再次注册时提示已存在

后台详细报错如下

time="2020-07-14T16:34:52+08:00" level=info msg="login start, user_information: {"id":0,"account_id":"","account_name":"admin","account_password":"admin123","tel":"","email":"","role_id":0,"title_id":0,"create_time":"","update_time":"","wechat":"","dingding":""}" source="services/user_service.go:122"
time="2020-07-14T16:34:52+08:00" level=error msg="Failed to get user title information for login. error : record not found" source="services/user_service.go:154"
time="2020-07-14T16:34:52+08:00" level=info msg="login end, user_information: {"id":0,"account_id":"","account_name":"admin","account_password":"admin123","tel":"","email":"","role_id":0,"title_id":0,"create_time":"","update_time":"","wechat":"","dingding":""}" source="services/user_service.go:155"

依赖的mysql和es已经启动，登录arkcontrol web端一直卡住。是否需要启动其他进程？

我内网安装，没外网，有all-in-one的安装包么？

点击forum.cloud-ark.com跳转错误。

创建路径/ark/data1失败

ArkControl体验版操作手册根本打不开

新的一波收割韭菜的项目?

主机录入时，无法启动agent，总是说已经存在，但并未发现类似进程，是否为bug？

time="2019-08-15T07:20:17-04:00" level=info msg="依赖安装完成"
time="2019-08-15T07:20:17-04:00" level=info msg="尝试设置环境变量"
time="2019-08-15T07:20:18-04:00" level=info msg="尝试复制mysql tool"
time="2019-08-15T07:20:18-04:00" level=info msg="尝试启动arkagent;"
time="2019-08-15T07:20:18-04:00" level=info msg="检测到已经存在一个 arkagent 进程在运行！kill当前agent进程"