Comments (5)
Did you try the calibration?
https://tasmota.github.io/docs/Power-Monitoring-Calibration/
from tasmota.
Yes, but the value is sitll incorect.
20:38:34.709 MQT: tele/shellybagno/SENSOR = {"Time":"2024-04-26T20:38:34","ANALOG":{"Temperature1":53.273},"ENERGY":{"TotalStartTime":"2024-04-26T11:45:22","Total":0.07622,"Yesterday":0.01930,"Today":0.05692,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Frequency":50,"Voltage":205,"Current":0.000},"ESP32":{"Temperature":58.400},"TempUnit":"C"}
20:39:20.563 CMD: powerset 60.0
20:39:20.567 MQT: stat/shellybagno/RESULT = {"PowerSetCal":165}
20:39:34.722 MQT: tele/shellybagno/STATE = {"Time":"2024-04-26T20:39:34","Uptime":"0T04:19:09","UptimeSec":15549,"Heap":154,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":23,"Objects":300},"Wifi":{"AP":1,"SSId":"guilan","BSSId":"3C:A6:2F:08:7B:F7","Channel":1,"Mode":"HT20","RSSI":94,"Signal":-53,"LinkCount":1,"Downtime":"0T00:00:04"}}
20:39:34.731 MQT: tele/shellybagno/SENSOR = {"Time":"2024-04-26T20:39:34","ANALOG":{"Temperature1":53.273},"ENERGY":{"TotalStartTime":"2024-04-26T11:45:22","Total":0.07643,"Yesterday":0.01930,"Today":0.05713,"Period":0,"Power":17,"ApparentPower":17,"ReactivePower":0,"Factor":1.00,"Frequency":50,"Voltage":205,"Current":0.085},"ESP32":{"Temperature":58.400},"TempUnit":"C"}
20:40:34.698 MQT: tele/shellybagno/STATE = {"Time":"2024-04-26T20:40:34","Uptime":"0T04:20:09","UptimeSec":15609,"Heap":154,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":23,"Objects":300},"Wifi":{"AP":1,"SSId":"guilan","BSSId":"3C:A6:2F:08:7B:F7","Channel":1,"Mode":"HT20","RSSI":98,"Signal":-51,"LinkCount":1,"Downtime":"0T00:00:04"}}
20:40:34.706 MQT: tele/shellybagno/SENSOR = {"Time":"2024-04-26T20:40:34","ANALOG":{"Temperature1":53.273},"ENERGY":{"TotalStartTime":"2024-04-26T11:45:22","Total":0.07712,"Yesterday":0.01930,"Today":0.05782,"Period":1,"Power":17,"ApparentPower":17,"ReactivePower":0,"Factor":1.00,"Frequency":50,"Voltage":206,"Current":0.085},"ESP32":{"Temperature":58.400},"TempUnit":"C"}
20:40:53.711 CMD: voltageset 220
20:40:53.716 MQT: stat/shellybagno/RESULT = {"VoltageSetCal":14403}
20:41:34.720 MQT: tele/shellybagno/STATE = {"Time":"2024-04-26T20:41:34","Uptime":"0T04:21:09","UptimeSec":15669,"Heap":153,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":23,"Objects":300},"Wifi":{"AP":1,"SSId":"guilan","BSSId":"3C:A6:2F:08:7B:F7","Channel":1,"Mode":"HT20","RSSI":88,"Signal":-56,"LinkCount":1,"Downtime":"0T00:00:04"}}
20:41:34.729 MQT: tele/shellybagno/SENSOR = {"Time":"2024-04-26T20:41:34","ANALOG":{"Temperature1":53.315},"ENERGY":{"TotalStartTime":"2024-04-26T11:45:22","Total":0.07785,"Yesterday":0.01930,"Today":0.05855,"Period":1,"Power":19,"ApparentPower":19,"ReactivePower":0,"Factor":1.00,"Frequency":50,"Voltage":221,"Current":0.086},"ESP32":{"Temperature":59.400},"TempUnit":"C"}
from tasmota.
What you post shows that you did not perform the calibration
from tasmota.
Sorry for the incomplete cut and paste: this is the complete one.
09:23:57.524 CMD: powerset 58
09:23:57.528 MQT: stat/shellybagno/RESULT = {"PowerSetCal":153}
09:24:01.784 CMD: voltageset 213
09:24:01.789 MQT: stat/shellybagno/RESULT = {"VoltageSetCal":14318}
09:24:06.545 CMD: currentset 220
09:24:06.549 MQT: stat/shellybagno/RESULT = {"CurrentSetCal":251213}
09:24:32.690 MQT: tele/shellybagno/STATE = {"Time":"2024-04-27T09:24:32","Uptime":"0T17:04:07","UptimeSec":61447,"Heap":154,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":20,"MqttCount":2,"Berry":{"HeapUsed":23,"Objects":300},"Wifi":{"AP":1,"SSId":"guilan","BSSId":"3C:A6:2F:08:7B:F7","Channel":1,"Mode":"HT20","RSSI":100,"Signal":-50,"LinkCount":1,"Downtime":"0T00:00:04"}}
09:24:32.698 MQT: tele/shellybagno/SENSOR = {"Time":"2024-04-27T09:24:32","ANALOG":{"Temperature1":52.766},"ENERGY":{"TotalStartTime":"2024-04-26T11:45:22","Total":0.08050,"Yesterday":0.05938,"Today":0.00182,"Period":1,"Power":16,"ApparentPower":16,"ReactivePower":0,"Factor":1.00,"Frequency":50,"Voltage":214,"Current":0.075},"ESP32":{"Temperature":58.400},"TempUnit":"C"}
from tasmota.
I would like to apologise to everyone: the incorrect readings were caused by incorrect wiring. Thank you for your patience @sfromis.
from tasmota.
Related Issues (20)
- SwitchMode 6 TOGGLE CMD on the wrong edge HOT 1
- Berry energy.read outputs invalid JSON (nan issue) HOT 14
- ESP32 and PZEM-004T v3 working intermittently HOT 2
- Documentation for comands 'subscribe' and 'subscribe2' is swapped HOT 1
- Add a new ZbState called ZbLoaded to indicate that all ZbDevices and ZbLoads have been loaded successfully. HOT 5
- A4988_Stepper , Motor commands doesnt give feedback while called without argument. Motor MIS not working ? HOT 4
- Berry script not returning sensors values in a given condition HOT 5
- Timers not working after power loss because time resets
- Web-UI does not load (v13.4.1.2 on ESP8266EX) HOT 5
- Events and arrays with mqtt
- Compiling tasmota32 fails
- KNX Support : Latest commit in development branch introduced a regression when using DHT11 sensor HOT 2
- tasmota32 freezing after displaytext more than 128 characters HOT 1
- Display SSD1306 not Working after Upgrade to Tasmota 14.0.0 an Universal Driver HOT 16
- Matter 1.3 - support for energy monitoring HOT 1
- Confict warning in xsnss_53_sml.ino HOT 5
- Deep sleep with timers can wake multiple times due to clock drift.
- Domotixz IDX funktioniert mit 14-0-0 nicht mehr HOT 1
- Shutter + tilt matter device causes Tasmota to hang HOT 5
- Bluetooth BT BLE devives not recognized / found by Tasmota @ V 14.0.0 HOT 21
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tasmota.