Eagle
1.Open a new schematic file within your project.
2.Use the libraries provided in EAGLE or create custom libraries if necessary.
3.Place components onto the schematic sheet by using the 'Add' tool.
4.Connect the components using the 'Net' tool.
5.Label nets appropriately to ensure clarity
6.Once routing is complete, perform a ERC to ensure there are no errors and save the schematic.
7.Click on the 'Generate/Switch to Board' icon to create a board from your schematic.
8.EAGLE's board layout editor allows you to place components, route traces, and define board shapes.
9.Arrange components on the board to optimize space usage and minimize signal interference.
10.Route traces to connect components according to your schematic.
11.Use the various routing and editing tools provided by EAGLE to ensure proper routing and avoid design rule violations.
12.Once routing is complete, perform a design rule check (DRC) to ensure there are no errors and save the board layout.
13.Go to File > CAM Processor and set up CAM jobs to generate Gerber files for your PCB layers.
14.Verify generated files to ensure they contain all necessary information.
15.Save the generated manufacturing files.