FunWithFlags, the Elixir feature flag library.
If you're reading this on the GitHub repo, keep in mind that this readme refers to the master
branch. For the latest version released on Hex, please check the readme published with the docs.
FunWithFlags is an OTP application that provides a 2-level storage to save and retrieve feature flags, an Elixir API to toggle and query them, and a web dashboard as control panel.
It stores flag information in Redis or a relational DB (PostgreSQL or MySQL, with Ecto) for persistence and synchronization across different nodes, but it also maintains a local cache in an ETS table for fast lookups. When flags are added or toggled on a node, the other nodes are notified via PubSub and reload their local ETS caches.
- What's a Feature Flag
- Usage
- Web Dashboard
- Origin
- So, caching, huh?
- To Do
- Installation
- Configuration
- Extensibility
- Application Start Behaviour
- Testing
- Development
Feature flags, or feature toggles, are boolean values associated to a name. They should be used to control whether some application feature is enabled or disabled, and they are meant to be modified at runtime while an application is running. This is usually done by the people who control the application.
In their simplest form, flags can be toggled on and off globally. More advanced rules or "gates" allow a fine grained control over their status. For example, it's possible to toggle a flag on and off for specific entities or for groups.
The goal is to have more granular and precise control over what is made available to which users, and when. A common use case, in web applications, is to enable a functionality without the need to deploy or restart the server, or to enable it only for internal users to test it before rolling it out to everyone. Another scenario is the ability to quickly disable a functionality if it's causing problems. They can also be used to implement a simple authorization system, for example to an admin area.
FunWithFlags has a simple API to query and toggle feature flags. Most of the time, you'll call FunWithFlags.enabled?/2
with the name of the flag and optional arguments.
Different kinds of toggle gates are supported:
- Boolean: globally on and off.
- Actors: on or off for specific structs or data. The
FunWithFlags.Actor
protocol can be implemented for types and structs that should have specific rules. For example, in web applications it's common to use a%User{}
struct or equivalent as an actor, or perhaps the current country of the request. - Groups: on or off for structs or data that belong to a category or satisfy a condition. The
FunWithFlags.Group
protocol can be implemented for types and structs that belong to groups for which a feature flag can be enabled or disabled. For example, one could implement the protocol for a%User{}
struct to identify administrators. - %-of-Time: globally on for a percentage of the time. It ignores actors and groups. Mutually exclusive with the %-of-actors gate.
- %-of-Actors: globally on for a percentage of the actors. It only applies when the flag is checked with a specific actor and is ignored when the flag is checked without actor arguments. Mutually exclusive with the %-of-time gate.
Boolean, Actor and Group gates can express either an enabled or disabled state. The percentage gates can only express an enabled state, as disabling something for a percentage of time or actors is logically equivalent to enabling it for the complementary percentage.
The priority order is from most to least specific: Actors > Groups > Boolean > Percentage
, and it applies to both enabled and disabled gates.
For example, a disabled group gate takes precedence over an enabled boolean (global) gate for the entities in the group, and a further enabled actor gate overrides the disabled group gate for a specific entity. When an entity belongs to multiple groups with conflicting toggle status, the disabled group gates have precedence over the enabled ones. The percentage gates are checked last, if present, and they're only checked if no other gate is enabled.
As another example, a flag can have a disabled boolean gate and a 50% enabled %-of-actors gate. When the flag is checked with an actor, it has a (deterministic, consistent and repeatable) 50% chance to be enabled, but when checked without an actor argument it will always be disabled. If we add to the flag a disabled actor gate and an enabled group gate, the flag will be always disabled for the actor, always enabled for any other actor matching the group, have a 50% change to be enabled for any other actor, and always be disabled when checked without actor arguments. If, then, we replace the 50%-of-actors gate with a 50%-of-time gate, the flag will be always disabled for the actor, always enabled for any other actor matching the group, and have a 50% chance to be enabled for any other actor or when checked without an actor argument.
The boolean gate is the simplest one. It's either enabled or disabled, globally. It's also the gate with the second lowest priority (it can mask the percentage gates). If a flag is undefined, it defaults to be globally disabled.
FunWithFlags.enabled?(:cool_new_feature)
false
{:ok, true} = FunWithFlags.enable(:cool_new_feature)
FunWithFlags.enabled?(:cool_new_feature)
true
{:ok, false} = FunWithFlags.disable(:cool_new_feature)
FunWithFlags.enabled?(:cool_new_feature)
false
This allows you to enable or disable a flag for one or more entities. For example, in web applications it's common to use a %User{}
struct or equivalent as an actor, or perhaps the data used to represent the current country for an HTTP request. This can be useful to showcase a work-in-progress feature to someone, to gradually rollout a functionality by country, or to dynamically disable some features in some contexts.
Actor gates take precedence over the others, both when they're enabled and when they're disabled. They can be considered as toggle overrides.
In order to be used as an actor, an entity must implement the FunWithFlags.Actor
protocol. This can be implemented for custom structs or literally any other type.
defmodule MyApp.User do
defstruct [:id, :name]
end
defimpl FunWithFlags.Actor, for: MyApp.User do
def id(%{id: id}) do
"user:#{id}"
end
end
bruce = %MyApp.User{id: 1, name: "Bruce"}
alfred = %MyApp.User{id: 2, name: "Alfred"}
FunWithFlags.Actor.id(bruce)
"user:1"
FunWithFlags.Actor.id(alfred)
"user:2"
defimpl FunWithFlags.Actor, for: Map do
def id(%{actor_id: actor_id}) do
"map:#{actor_id}"
end
def id(map) do
map
|> inspect()
|> (&:crypto.hash(:md5, &1)).()
|> Base.encode16
|> (&"map:#{&1}").()
end
end
FunWithFlags.Actor.id(%{actor_id: "bar"})
"map:bar"
FunWithFlags.Actor.id(%{foo: "bar"})
"map:E0BB5BA6873E3AC34B0B6928190C1F2B"
With the protocol implemented, actors can be used with the library functions:
{:ok, true} = FunWithFlags.enable(:restful_nights)
{:ok, false} = FunWithFlags.disable(:restful_nights, for_actor: bruce)
{:ok, true} = FunWithFlags.enable(:batmobile, for_actor: bruce)
FunWithFlags.enabled?(:restful_nights)
true
FunWithFlags.enabled?(:batmobile)
false
FunWithFlags.enabled?(:restful_nights, for: alfred)
true
FunWithFlags.enabled?(:batmobile, for: alfred)
false
FunWithFlags.enabled?(:restful_nights, for: bruce)
false
FunWithFlags.enabled?(:batmobile, for: bruce)
true
Actor identifiers must be globally unique binaries. Since supporting multiple kinds of actors is a common requirement, all the examples use the common technique of namespacing the IDs:
defimpl FunWithFlags.Actor, for: MyApp.User do
def id(user) do
"user:#{user.id}"
end
end
defimpl FunWithFlags.Actor, for: MyApp.Country do
def id(country) do
"country:#{country.iso3166}"
end
end
Group gates are similar to actor gates, but they apply to a category of entities rather than specific ones. They can be toggled on or off for the name of the group instead of a specific term.
Group gates take precedence over boolean gates but are overridden by actor gates.
Group names can be binaries or atoms. Atoms are supported for retro-compatibility with versions <= 0.9
and binaries are therefore preferred. In fact, atoms are internally converted to binaries and are then stored and later retrieved as binaries.
The semantics to determine which entities belong to which groups are application specific.
Entities could have an explicit list of groups they belong to, or the groups could be abstract and inferred from some other attribute. For example, an :employee
group could comprise all %User{}
structs with an email address matching the company domain, or an :admin
group could be made of all users with %User{admin: true}
.
In order to be affected by a group gate, an entity should implement the FunWithFlags.Group
protocol. The protocol automatically falls back to a default Any
implementation, which states that any entity belongs to no group at all. This makes it possible to safely use "normal" actors when querying group gates, and to implement the protocol only for structs and types for which it matters.
The protocol can be implemented for custom structs or literally any other type.
defmodule MyApp.User do
defstruct [:email, admin: false, groups: []]
end
defimpl FunWithFlags.Group, for: MyApp.User do
def in?(%{email: email}, "employee"), do: Regex.match?(~r/@mycompany.com$/, email)
def in?(%{admin: is_admin}, "admin"), do: !!is_admin
def in?(%{groups: list}, group_name), do: group_name in list
end
elisabeth = %MyApp.User{email: "[email protected]", admin: true, groups: ["engineering", "product"]}
FunWithFlags.Group.in?(elisabeth, "employee")
true
FunWithFlags.Group.in?(elisabeth, "admin")
true
FunWithFlags.Group.in?(elisabeth, "engineering")
true
FunWithFlags.Group.in?(elisabeth, "marketing")
false
defimpl FunWithFlags.Group, for: Map do
def in?(%{group: group_name}, group_name), do: true
def in?(_, _), do: false
end
FunWithFlags.Group.in?(%{group: "dumb_tests"}, "dumb_tests")
true
With the protocol implemented, actors can be used with the library functions:
FunWithFlags.disable(:database_access)
FunWithFlags.enable(:database_access, for_group: "engineering")
FunWithFlags.enabled?(:database_access)
false
FunWithFlags.enabled?(:database_access, for: elisabeth)
true
%-of-time gates are similar to boolean gates, but they allow to enable a flag for a percentage of the time. In practical terms, this means that a percentage of the enabled?()
calls for a flag will return true, regardless of the presence of an actor argument.
When a %-of-time gate is checked a pseudo-random number is generated and compared with the percentage value of the gate. If the result of the random roll is lower than the gate's percentage value, the gate is considered enabled. So, at the risk of stating the obvious and for the sake of clarity, a 90% gate is enabled more often than a 10% gate.
%-of-time gates are useful to gradually introduce alternative code paths that either have the same effects of the old ones, or don't have effects visible to the users. This last point is important, because with a %-of-time gate the application will behave differently on a pseudo-random basis.
A good use case for %-of-time gates is to safely test the correctness or performance and load characteristics of an alternative implementation of a functionality.
For example:
FunWithFlags.clear(:alternative_implementation)
FunWithFlags.enable(:alternative_implementation, for_percentage_of: {:time, 0.05})
def foo(bar) do
if FunWithFlags.enabled?(:alternative_implementation) do
new_foo(bar)
else
old_foo(bar)
end
end
The %-of-time gate is incompatible and mutually exclusive with the %-of-actors gate, and it replaces it when it gets set. While there are ways to make them work together, it would needlessly overcomplicate the priority rules.
%-of-actors gates are similar to the %-of-time gates, but instead of using a pseudo-random chance they calculate the actor scores using a deterministic, consistent and repeatable function that factors in the flag name. At a high level:
actor
|> FunWithFlags.Actor.id()
|> sha256_hash(flag_name)
|> hash_to_percentage()
Since the scores depend on both the actor ID and the flag name, they're guaranteed to always be the same for each actor-flag combination. At the same time, the same actor will have different scores for different flags, and each flag will have a uniform distribution of scores for all the actors.
Just like for the %-of-time gates, an actor's score is compared with the gate's percentage value and, if lower, the gate will result enabled.
A practical example, based on the FunWithFlags.Actor
protocol set up from the previous sections:
defmodule MyApp.User do
defstruct [:id, :name]
end
defimpl FunWithFlags.Actor, for: MyApp.User do
def id(%{id: id}) do
"user:#{id}"
end
end
frodo = %MyApp.User{id: 1, name: "Frodo Baggins"}
sam = %MyApp.User{id: 2, name: "Samwise Gamgee"}
pippin = %MyApp.User{id: 3, name: "Peregrin Took"}
merry = %MyApp.User{id: 4, name: "Meriadoc Brandybuck"}
FunWithFlags.Actor.Percentage.score(frodo, :pipeweed)
0.8658294677734375
FunWithFlags.Actor.Percentage.score(sam, :pipeweed)
0.68426513671875
FunWithFlags.Actor.Percentage.score(pippin, :pipeweed)
0.510528564453125
FunWithFlags.Actor.Percentage.score(merry, :pipeweed)
0.2617645263671875
{:ok, true} = FunWithFlags.enable(:pipeweed, for_percentage_of: {:actors, 0.60})
FunWithFlags.enabled?(:pipeweed, for: frodo)
false
FunWithFlags.enabled?(:pipeweed, for: sam)
false
FunWithFlags.enabled?(:pipeweed, for: pippin)
true
FunWithFlags.enabled?(:pipeweed, for: merry)
true
{:ok, true} = FunWithFlags.enable(:pipeweed, for_percentage_of: {:actors, 0.685})
FunWithFlags.enabled?(:pipeweed, for: sam)
true
FunWithFlags.Actor.Percentage.score(pippin, :pipeweed)
0.510528564453125
FunWithFlags.Actor.Percentage.score(pippin, :mushrooms)
0.6050872802734375
FunWithFlags.Actor.Percentage.score(pippin, :palantir)
0.144073486328125
Once a %-of-actors gate has been defined for a flag, the same actor will always see the same result (unless its actor or group gates are set, or the flag gets globally enabled). Also, this means that as long the percentage value of the gate will increase and never decrease, actors for which the gate has been enabled will always see it enabled.
This is ideal to gradually roll out new functionality to users.
For example, in a Phoenix application:
FunWithFlags.clear(:new_design)
FunWithFlags.enable(:new_design, for_percentage_of: {:actors, 0.2})
FunWithFlags.enable(:new_design, for_group: "beta_testers")
defmodule MyPhoenixApp.MyView do
use MyPhoenixApp, :view
def render("my_template.html", assigns) do
if FunWithFlags.enabled?(:new_design, for: assigns.user) do
render("new_template.html", assigns)
else
render("old_template.html", assigns)
end
end
end
The %-of-actors gate is incompatible and mutually exclusive with the %-of-time gate, and it replaces it when it gets set. While there are ways to make them work together, it would needlessly overcomplicate the priority rules.
Sometimes enabling or disabling a gate is not what you want, and removing that gate's rules would be more correct. For example, if you don't need anymore to explicitly enable or disable a flag for an actor or for a group, and the default state should be used instead, clearing the gate is the right choice.
More examples:
alias FunWithFlags.TestUser, as: User
harry = %User{id: 1, name: "Harry Potter", groups: ["wizards", "gryffindor"]}
hagrid = %User{id: 2, name: "Rubeus Hagrid", groups: ["wizards", "gamekeeper"]}
dudley = %User{id: 3, name: "Dudley Dursley", groups: ["muggles"]}
FunWithFlags.disable(:wands)
FunWithFlags.enable(:wands, for_group: "wizards")
FunWithFlags.disable(:wands, for_actor: hagrid)
FunWithFlags.enabled?(:wands)
false
FunWithFlags.enabled?(:wands, for: harry)
true
FunWithFlags.enabled?(:wands, for: hagrid)
false
FunWithFlags.enabled?(:wands, for: dudley)
false
FunWithFlags.clear(:wands, for_actor: hagrid)
FunWithFlags.enabled?(:wands, for: hagrid)
true
FunWithFlags.clear(:wands, for_group: "wizards")
FunWithFlags.enabled?(:wands, for: hagrid)
false
FunWithFlags.enabled?(:wands, for: harry)
false
FunWithFlags.enable(:magic_powers, for_percentage_of: {:time, 0.0001})
FunWithFlags.clear(:magic_powers, for_percentage: true)
For completeness, clearing the boolean gate is also supported.
FunWithFlags.enable(:wands)
FunWithFlags.enabled?(:wands)
true
FunWithFlags.enabled?(:wands, for: harry)
true
FunWithFlags.enabled?(:wands, for: hagrid)
false
FunWithFlags.enabled?(:wands, for: dudley)
true
FunWithFlags.clear(:wands, boolean: true)
FunWithFlags.enabled?(:wands)
false
FunWithFlags.enabled?(:wands, for: harry)
true
FunWithFlags.enabled?(:wands, for: hagrid)
false
FunWithFlags.enabled?(:wands, for: dudley)
false
It's also possible to clear an entire flag.
FunWithFlags.clear(:wands)
FunWithFlags.enabled?(:wands)
false
FunWithFlags.enabled?(:wands, for: harry)
false
FunWithFlags.enabled?(:wands, for: hagrid)
false
FunWithFlags.enabled?(:wands, for: dudley)
false
An optional extension of this library is FunWithFlags.UI
, a web graphical control panel. It's a Plug, so it can be embedded in a host Phoenix or Plug application or served standalone.
This library is heavily inspired by the flipper Ruby gem.
Having used Flipper in production at scale, this project aims to improve in two main areas:
- Minimize the load on the persistence layer: feature flags are not toggled that often, and there is no need to query Redis or the DB for each check.
- Be more reliable: it should keep working with the latest cached values even if Redis becomes unavailable, although with the risk of nodes getting out of sync. (if the DB becomes unavailable, feature flags are probably the last of your problems)
Just as Elixir and Phoenix are meant to scale better than Ruby on Rails with high levels of traffic and concurrency, FunWithFlags should aim to be more scalable and reliable than Flipper.
There are only two hard things in Computer Science: cache invalidation and naming things.
-- Phil Karlton
The reason to add an ETS cache is that, most of the time, feature flags can be considered static values. Doing a round-trip to the DB (Redis, PostgreSQL or MySQL) is expensive in terms of time and in terms of resources, especially if multiple flags must be checked during a single web request. In the worst cases, the load on the DB can become a cause of concern, a performance bottleneck or the source of a system failure.
Often the solution is to memoize the flag values in the context of the web request, but the approach can be extended to the scope of the entire server. This is what FunWithFlags does, as each application node/instance caches the flags in an ETS table.
Of course, caching adds a different kind of complexity and there are some pros and cons. When a flag is created or updated the ETS cache on the local node is updated immediately, and the main problem is synchronizing the flag data across the other application nodes that should share the same view of the world.
For example, if we have two or more nodes running the application, and on one of them an admin user updates a flag that the others have already cached, or creates a flag that the others have already looked up (and cached as "disabled"), then the other nodes must be notified of the changes.
FunWithFlags uses three mechanisms to deal with the problem:
- Use PubSub to emit change notifications. All nodes subscribe to the same channel and reload flags in the ETS cache when required.
- If that fails, the cache has a configurable TTL. Reading from the DB every few minutes is still better than doing so 30k times per second.
- If that doesn't work, it's possible to disable the cache and just read from the DB all the time. That's what Flipper does.
In terms of performance, very synthetic benchmarks (where the DBs run on the same machine as the Beam code, so with no network hop but sharing the CPU) show that the ETS cache makes querying the FunWithFlags interface between 10 and 20 times faster than going directly to Redis, and between 20 and 40 times faster than going directly to Postgres. The variance depends on the complexity of the flag data to be retrieved.
- Add some optional randomness to the TTL, so that Redis or the DB don't get hammered at constant intervals after a server restart.
The package can be installed by adding fun_with_flags
to your list of dependencies in mix.exs
.
In order to have a small installation footprint, the dependencies for the different adapters are all optional. You must explicitly require the ones you wish to use.
def deps do
[
{:fun_with_flags, "~> 1.10.1"},
# either:
{:redix, "~> 0.9"},
# or:
{:ecto_sql, "~> 3.0"},
# optionally, if you don't want to use Redis' builtin pubsub
{:phoenix_pubsub, "~> 2.0"},
]
end
Using ecto_sql
for persisting the flags also requires an ecto adapter, e.g. postgrex
, mariaex
or myxql
. Please refer to the Ecto documentation for the details.
Since FunWithFlags depends on an Elixir more recent than 1.4, there is no need to explicitly declare the application.
If you need to customize how the :fun_with_flags
application is loaded and started, refer to the Application Start Behaviour section, below in this document.
The library can be configured in host applications through Mix and the config.exs
file. This example shows some default values:
config :fun_with_flags, :cache,
enabled: true,
ttl: 900 # in seconds
# the Redis persistence adapter is the default, no need to set this.
config :fun_with_flags, :persistence,
[adapter: FunWithFlags.Store.Persistent.Redis]
# this can be disabled if you are running on a single node and don't need to
# sync different ETS caches. It won't have any effect if the cache is disabled.
# The Redis PuSub adapter is the default, no need to set this.
config :fun_with_flags, :cache_bust_notifications,
[enabled: true, adapter: FunWithFlags.Notifications.Redis]
# Notifications can also be disabled, which will also remove the Redis/Redix dependency
config :fun_with_flags, :cache_bust_notifications, [enabled: false]
When using Redis for persistence and/or cache-busting PubSub it is necessary to configure the connection to the Redis instance. These options can be omitted if Redis is not being used. For example, the defaults:
# the Redis options will be forwarded to Redix.
config :fun_with_flags, :redis,
host: "localhost",
port: 6379,
database: 0
# a URL string can be used instead
config :fun_with_flags, :redis, "redis://localhost:6379/0"
# or a {URL, [opts]} tuple
config :fun_with_flags, :redis, {"redis://localhost:6379/0", socket_opts: [:inet6]}
# a {:system, name} tuple can be used to read from the environment
config :fun_with_flags, :redis, {:system, "REDIS_URL"}
Redis Sentinel is also supported. See the Redix docs for more details.
config :fun_with_flags, :redis,
sentinel: [
sentinels: ["redis:://locahost:1234/1"],
group: "primary",
],
database: 5
The library comes with two persistence adapters for the Redix
and Ecto
libraries, that allow to persist feature flag data in Redis, PostgreSQL or MySQL. In order to use any of them, you must declare the correct optional dependency in the Mixfile (see the installation instructions, above).
The Redis adapter is the default and there is no need to explicitly declare it. All it needs is the Redis connection configuration.
In order to use the Ecto adapter, an Ecto repo must be provided in the configuration. FunWithFlags expects the Ecto repo to be initialized by the host application, which also needs to start and supervise any required processes. If using Phoenix this is managed automatically by the framework, and it's fine to use the same repo used by the rest of the application.
Only PostgreSQL (via postgrex
) and MySQL (via mariaex
or myxql
) are supported at the moment. Support for other RDBMSs might come in the future.
To configure the Ecto adapter:
# Normal Phoenix and Ecto configuration.
# The repo can either use the Postgres or MySQL adapter.
config :my_app, ecto_repos: [MyApp.Repo]
config :my_app, MyApp.Repo,
username: "my_db_user",
password: "my secret db password",
database: "my_app_dev",
hostname: "localhost",
pool_size: 10
# FunWithFlags configuration.
config :fun_with_flags, :persistence,
adapter: FunWithFlags.Store.Persistent.Ecto,
repo: MyApp.Repo,
ecto_table_name: "your_table_name" # optional
# Default table name is "fun_with_flags_toggles".
It's also necessary to create the DB table that will hold the feature flag data. To do that, create a new migration in your project and copy the contents of the provided migration file. Then run the migration.
When using the Ecto persistence adapter, FunWithFlags will annotate all queries using the Ecto Repo Query API with a custom option: [fun_with_flags: true]
. This is done to make it easier to identify FunWithFlags queries when working with Ecto customization hooks, e.g. the Ecto.Repo.prepare_query/3
callback. Since this sort of annotations via custom query options are only useful with the Ecto Query API (context), other repo functions are not annotated with the custom option.
If you followed the Ecto guide on setting up multi-tenancy with foreign keys, you must add an exception for queries originating from FunWithFlags. As mentioned in the section above, these queries have a custom query option named :fun_with_flags
set to true
:
# Sample code, only relevant if you followed the Ecto guide on multi tenancy with foreign keys.
defmodule MyApp.Repo do
use Ecto.Repo, otp_app: :my_app
require Ecto.Query
@impl true
def prepare_query(_operation, query, opts) do
cond do
# add the check for opts[:fun_with_flags] here:
opts[:skip_org_id] || opts[:schema_migration] || opts[:fun_with_flags] ->
{query, opts}
org_id = opts[:org_id] ->
{Ecto.Query.where(query, org_id: ^org_id), opts}
true ->
raise "expected org_id or skip_org_id to be set"
end
end
end
The library comes with two PubSub adapters for the Redix
and Phoenix.PubSub
libraries. In order to use any of them, you must declare the correct optional dependency in the Mixfile. (see the installation instructions, below)
The Redis PubSub adapter is the default and doesn't need to be explicitly configured. It can only be used in conjunction with the Redis persistence adapter however, and is not available when using Ecto for persistence. When used, it connects directly to the Redis instance used for persisting the flag data.
The Phoenix PubSub adapter uses the high level API of Phoenix.PubSub
, which means that under the hood it could use either its PG2 or Redis adapters, and this library doesn't need to know. It's provided as a convenient way to leverage distributed Erlang when using FunWithFlags in a Phoenix application, although it can be used independently (without the rest of the Phoenix framework) to add PubSub to Elixir apps running on Erlang clusters.
FunWithFlags expects the Phoenix.PubSub
process to be started by the host application, and in order to use this adapter the client (name or PID) must be provided in the configuration.
For example, in Phoenix (>= 1.5.0) it would be:
# normal Phoenix configuration
config :my_app, MyApp.Web.Endpoint,
pubsub_server: MyApp.PubSub
# FunWithFlags configuration
config :fun_with_flags, :cache_bust_notifications,
enabled: true,
adapter: FunWithFlags.Notifications.PhoenixPubSub,
client: MyApp.PubSub
Or, without Phoenix:
# possibly in the application's supervision tree
children = [
{Phoenix.PubSub, [name: :my_pubsub_process_name, adapter: Phoenix.PubSub.PG2]}
]
opts = [strategy: :one_for_one, name: MyApp.Supervisor]
{:ok, _pid} = Supervisor.start_link(children, opts)
# config/config.exs
config :fun_with_flags, :cache_bust_notifications,
enabled: true,
adapter: FunWithFlags.Notifications.PhoenixPubSub,
client: :my_pubsub_process_name
This library aims to be extensible and allows users to provide their own persistence layer.
This is supported through FunWithFlags.Store.Persistent
, a generic persistence behaviour that is adopted by the builtin Redis and Ecto adapters.
Custom persistence adapters can adopt the behaviour and then be configured as the persistence module in the Mix config of the user applications.
For example, an application can define this module:
defmodule MyApp.MyAlternativeFlagStore do
@behaviour FunWithFlags.Store.Persistent
# implement all the behaviour's callback
end
And then configure the library to use it:
config :fun_with_flags, :persistence, adapter: MyApp.MyAlternativeFlagStore
As explained in the Installation section, above in this document, the :fun_with_flags
application will start automatically when you add the package as a dependency in your Mixfile. The :fun_with_flags
application starts its own supervision tree which manages all required processes and is provided by the FunWithFlags.Supervisor
module.
Sometimes, this can cause issues and race conditions if FunWithFlags is configured to rely on Erlang processes that are owned by another application. For example, if you have configured the Phoenix.PubSub
cache-busting notification adapter, one of FunWithFlag's processes will immediately try to subscribe to its notifications channel using the provided PubSub process identifier. If that process is not available, FunWithFlags will retry a few times and then give up and raise an exception. This will become a problem if you're using FunWithFlags in a large application (e.g. a Phoenix app) and the :fun_with_flags
application starts much faster than the Phoenix supervision tree.
In these cases, it's better to directly control how FunWithFlags starts its processes.
The first step is to add the FunWithFlags.Supervisor
module directly to the supervision tree of the host application. For example, in a Phoenix app it would look like this:
defmodule MyPhoenixApp.Application do
@moduledoc false
use Application
def start(_type, _args) do
children = [
MyPhoenixApp.Repo,
MyPhoenixAppWeb.Telemetry,
{Phoenix.PubSub, name: MyPhoenixApp.PubSub},
MyPhoenixAppWeb.Endpoint,
+ FunWithFlags.Supervisor,
]
opts = [strategy: :one_for_one, name: MyPhoenixApp.Supervisor]
Supervisor.start_link(children, opts)
end
# ...
Then it's necessary to configure the Mix project to not start the :fun_with_flags
application automatically. This can be accomplished in the Mixfile in a number of ways, for example: (Note: These are alternative solutions, you don't need to do both. You must decide which is more appropriate for your setup.)
- Option A: Declare the
:fun_with_flags
dependency with either theruntime: false
orapp: false
options. (docs)
- {:fun_with_flags, "~> 1.6"},
+ {:fun_with_flags, "~> 1.6", runtime: false},
If you use releases then you'll also need to modify the releases
section in mix.exs
so that it loads the fun_with_flags
application explicitly (since runtime: false
/ app: false
will exclude it from the assembled release).
def project do
[
app: :my_phoenix_app,
+ releases: [
+ my_phoenix_app: [
+ applications: [
+ fun_with_flags: :load
+ ]
+ ]
]
end
- Option B: Declare that the
:fun_with_flags
application is managed directly by your host application (docs).
def application do
[
mod: {MyPhoenixApp.Application, []},
+ included_applications: [:fun_with_flags],
extra_applications: [:logger, :runtime_tools]
]
end
The result of those changes is that the :fun_with_flags
application won't be loaded and started automatically, and therefore the FunWithFlags supervision tree won't risk to be started before the other processes in the host Phoenix application. Rather, the supervision tree will start alongside the other core Phoenix processes.
One final note on this topic is that if you're also using FunWithFlags.UI
(refer to the Web Dashboard section, above in this document), then that will need to be configured as well. The reason is that :fun_with_flags
is a dependency of :fun_with_flags_ui
, so including the latter as a dependency will cause the former to be auto-started despite the configuration described above. To avoid this, the same configuration should be used for the :fun_with_flags_ui
dependency, regardless of the approach used (Option A: runtime: false
, app: false
; or Option B: included_applications
).
This library depends on Redis, PostgreSQL and MySQL, and you'll need them installed and running on your system in order to run the complete test suite. The tests will use the Redis db number 5 and then clean after themselves, but it's safer to start Redis in a directory where there is no dump.rdb
file you care about to avoid issues. The Ecto tests will use the SQL sandbox and all transactions will be automatically rolled back.
To setup the test DB for the Ecto persistence tests, run:
MIX_ENV=test PERSISTENCE=ecto mix do ecto.create, ecto.migrate # for postgres
rm -rf _build/test/lib/fun_with_flags/
MIX_ENV=test PERSISTENCE=ecto RDBMS=mysql mix do ecto.create, ecto.migrate # for mysql
Then, to run all the tests:
$ mix test.all
The test.all
task will run the test suite multiple times with different configurations to exercise a matrix of options and adapters.
The Mixfile defines a few other helper tasks that allow to run the test suite with some more specific configurations.
Like for testing, developing FunWithFlags requires local installations of Redis, PostgreSQL and MySQL. For work that doesn't touch the persistence adapters too closely, it's possibly simpler to just run FunWithFlags with Redis and then let CI run the tests with the other adapters.
A common workflow is to run the tests and interact with the package API in iex
.
With the default configuration, iex -S mix
will compile and load FunWithFlags with Redis persistence and Redis PubSub. To compile and run the package in iex
with Ecto and Phoenix PubSub support instead, use these commands:
bin/console_ecto postgres
bin/console_ecto mysql
This package uses the credo and dialyxir (dialyzer) packages to help with local development. Their mix tasks can be executed in the root directory of the project:
mix credo
mix dialyzer