This repo enable arm-none-eabi-gcc and Makefile support to GigaDevice GD32F4xx Firmware Library (v3.0.3 without any changes).

And the default linker script and startup asm file is for GD32F470ZGT6 to support development with JLC LiangShanPi.

GD32F4xx standard firmware library is suitable for GD32F4xx series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.

You need change:

• Makefile, modify from '-DGD32F470' to your part model
• Firmware/Ld/Link.ld, define flash and ram size to match your MCU
• Choose the startup asm file in 'Firmware/CMSIS/GD/GD32F4xx/Source/GCC' dir and change the Makefile.

The default 'User' codes is to blink four LEDs on JLC LiangShanPi board.

to build it, type:

make

The gd32f470zgt6.elf/bin/hex will be generated in 'build' dir.

LiangShanPi provide both MCU and RGB LCD interface.

'LCD_MCU_LiangShanPi' is the demo code for LiangShanPi LCD module connect to MCU interface, to build it:

cd LCD_MCU_LiangShanPi
make

'LCD_TOUCH_MCU_LiangShanPi' is the demo code for LiangShanPi LCD module connect to MCU interface with touch screen support, to build it:

cd LCD_TOUCH_MCU_LiangShanPi
make

openocd -f /usr/share/openocd/scripts/interface/cmsis-dap.cfg -f /usr/share/openocd/scripts/target/stm32f4x.cfg -c "program build/gd32f470zgt6.elf verify reset exit"

or simple way:

make program