aboutflash / starcitizen-warthogscript Goto Github PK

I'm having trouble getting it to work. The readme does not explain to me in an understandable way what I have to set up in the TARGET software. I have never used this TARGET software before. A more detailed and specific description of the individual steps would be very helpful. Some other points are also not explained clearly.

## How to run
Point your T.A.R.G.E.T. software to run the script directly w/o loading the GUI.
C:\Program Files (x86)\Thrustmaster\TARGET\x64\TARGETGUI.exe
E:\StarCitizen-WarthogScript\script\StarCitizen_3.8.x_combined.tmc

I don't know where I can configure that in TARGET. I found several places in the software where I can load these files from the pack or create presets. A detailed step by step description would be helpful.

## Troubleshooting
You have to use the correct numbers matching your machines setup!

What are the correct numbers or how do I find out what the correct numbers are?

Import the HOTAS keybindings to a different slot.
This requires also to adjust the deadzones for that slot! See manual settings

Where do I do that and where do I set up the deadzones. Which values are necessary or in which range is recommended? In the TARGET software as well as in SC I have the possibility to set deadzones.

How can I check that I have set everything I need in TARGET correctly?

keep getting Compile Error: Syntax error: Ã in StarCitizen_3.8.x_combined.tmc at line 24
when i try to launch the profile

Hello

Just creating this so i can get notified of the 3.10 update i hope you make, they made some key bind changes

New Issue showed up ...
when loading the profile ... the console takes quite some time to combine the devices ...
on completion its showing "Thrustmaster combined" + "Throttle - HOTAS Warthog" + "Joystick - HOTAS Warthog" ... istnt it supposed to show just the combined controller ?
no throttle control ingame when all of these game controllers are listed ...
any workaround for that ?
thanks in advance

https://ibb.co/6Jv6x99

https://ibb.co/LJt0z6B

Originally posted by @FinkeStinger in #2 (comment)

where if I preload the TARGET profile before launching Star Citizen the initial loading screen will hang and then time out displaying a "Not responding" error and required forced closure.

This problem disappears if I unload the profile in target and then launch star citizen.
My thoughts are that a device may be in a "spamming mode" as normal keyboard bindings are utilized as much as possible, which may interfere with active focus causing instability perhaps.

for example,. the throttle in off mode when another software/app is in focus clearly spams the letter "x" until the throttle is set to max mode, so maybe something else (as my throttle was already at max position when error occurred) is also causing the same type of spam.

I have also had to disable sticky keys as for some reason my sticky key button kept activating.

is it normal for the ship to roll when i set the left throttle stick to min or max ?... i thought this stick is just the thruster output ?
pls help ... i cant stand this xD

Compile Error: Syntax error: Ã in StarCitizen_3.8.x_combined.tmc at line 24

hello

Im getting this error when running the script after following the instructions. What may be causing it ?

All files have been extracted as is the default state intended by the developer, nothing has been added, moved or changed by me in any way.

Not Sure if it's related to the game latest version or the Combination of Joysticks I have.
But ingame I have no throttle. I see however that "something" happens with the throttle when I move it... but it doesn't increase.
The actual throttle bound on the MIC Switch Button - If I move it forward it throttles up, if I move it back it throttles down...
The Throttle itself does some very faint movement on the throttle ingame.

Firmware is 23;
Game Version is: 3.13

This is what I get when running the script:

*** Allocated ProcInstances found from the previous run: use FreeProcInstance() *** 
Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll"

StartCitizen 3.8.0 combined Throttle & Joystick
... log_level set to 1 (change it to 0 to stop logging)

Physical USB HID devices managed by script!
Currently plugged USB HID devices[1]:
1: "Throttle - HOTAS Warthog" - "USB\VID_044F&PID_0404&REV_0100"
USB HID device "Throttle - HOTAS Warthog"(USB\VID_044F&PID_0404\5&3296ACEA&0&3) selected
USB HID device with hardware id "VID_044F&PID_0402" cannot be found
Virtual HID devices managed by script!
Connecting virtual joystick...Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard...Done
Connecting virtual mouse (absolute axes)...Done
... init mappings:
... add throttle mappings
... add joystick mappings
... illuminate throttle

main returned 0

Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll"

StartCitizen 3.8.0 combined Throttle & Joystick
... log_level set to 1 (change it to 0 to stop logging)

Physical USB HID devices managed by script!
Currently plugged USB HID devices[2]:
1: "Joystick - HOTAS Warthog" - "USB\VID_044F&PID_0402&REV_0100"
2: "Throttle - HOTAS Warthog" - "USB\VID_044F&PID_0404&REV_0100"
Error: (internal) cannot associate a filter with the selected USB HID device "VID_044F&PID_0404"
Installing filter driver to VID_044F&PID_0402. Please Wait...Script stopped!
Done!
Error: (internal) cannot associate a filter with the selected USB HID device "VID_044F&PID_0402"

Runtime Error: STOP request received while running main on line 28 in "E:\StarCitizen-WarthogScript\script\StarCitizen_3.8.x_combined.tmc"
Error: Script run timed out!

What can I do? Thanks