Suggestion for ABS about muldex HOT 4 CLOSED

The Muldex screams ABS :-)

I agree, with all the motors stationary mounted behind the frame would make it perfect.

from muldex.

I would imagine that you could use most/all of the same mount points for the electronics, etc. internally but mount them to the other side of the same panel holes. I know that's a technical possibility with my Railcore as long as I didn't want to use the same panels on the inside as I have around the electronics on the outside.

from muldex.

The frame could definitely be extended to enclose the chamber. Since I built it for MRRF I wanted it to be open so people can see the belt kinematics easier so I did not enclose it. My thought was that the motors and electronics would stay where they are but I would extend the wall all the way up between them.

from muldex.

The Muldex screams ABS :-)

from muldex.