No Connection to powered off AMT-Device possible about meshcentral HOT 3 CLOSED

Hi Narwahls,

Meshcentral will still be able to contact an AMT machine if it is:

• located on the same network as Meshcentral server
• also connected through CIRA (firmware managed TLS ports forwarding)

So here is what I recommend. If you have a machine that is joined to a Mesh Agent based Mesh, you could also add CIRA to that machine. The CIRA activation link for your agent based mesh is located on the right hand side (besides Add Agent, now you see Add CIRA, Add Agent).

Once you add CIRA to the AMT machine, you will always have permanent AMT link.
This feature has been added on late 0.1.6 version and it should be still available now. :)

Let us know if you still need help. If you have any other feature requests or suggestions, please feel free to contribute too.
Regards,

Joko

from meshcentral.

@Ylianst I think this issue can be closed since OP hasn't responded in almost a year.

from meshcentral.

Closing this issue. Feel free to open a new issue on this topic if needed.

from meshcentral.