Comments (52)
2011-10-29 07:46:15: antoine changed status from new to accepted
from xpra.
2011-10-29 07:46:15: antoine commented
Would you mind trying to disable refresh batching by setting:
BATCH_EVENTS = False
in the
damage()
method inxpra/server.py
I think the problem is that the damage data is arriving in the wrong order (the ones that get batched arrive later than some of the newer damage data).
Can you confirm that this solves the problem and I'll cook up a better patch?
from xpra.
2011-10-29 09:19:39: antoine commented
This should be fixed properly in r260
from xpra.
2011-10-31 17:30:25: ddoole commented
I've applied the change to server.py and after playing with it for a few minutes it looks good.
from xpra.
2011-10-31 20:30:54: ddoole commented
I spent enough time using the server.py patch this afternoon (with no redraw glitches) that I'm confident your assessment of the problem is correct.
from xpra.
2011-11-03 19:11:37: ddoole commented
I just moved to 0.0.7.30 and the screen is refreshing properly. Thanks for the quick fix.
from xpra.
2011-11-04 08:40:43: antoine changed status from accepted to closed
from xpra.
2011-11-04 08:40:43: antoine changed resolution from ** to fixed
from xpra.
2011-11-04 16:08:51: ddoole changed status from closed to reopened
from xpra.
2011-11-04 16:08:51: ddoole changed resolution from fixed to **
from xpra.
2011-11-04 16:08:51: ddoole commented
Unfortunately, I just hit a case where the screen is not refreshing properly on 0.0.7.30. So the patch works much better than the original code, but it still has issues.
If I set BATCH_EVENTS = False, the refresh problem does go away.
from xpra.
2011-11-05 18:13:04: antoine changed status from reopened to accepted
from xpra.
2011-11-06 09:49:29: antoine commented
Can you tell me how to reproduce?
I have just reviewed (and simplified the code in r269) and cannot see anything wrong.For reference (please read to ensure this makes sense and that I haven't missed anything obvious), here's how damage regions are handled in the
damage()
method:
- if batching is disabled, just queue the new damage region in
self._damage
for this window id, adding the region to the existing one if one already existed and tell the network code that a packet is ready. ("damage_now
")- add this damage event to
self._damage_last_events
- if the window id already has a delayed region in
self._damage_delayed
then we add the damage data to it- if there aren't enough events for batching, or if they happened too slowly then we just
damage_now
(see above)- otherwise we create a new entry in
self._damage_delayed
for this window and schedule the "send_delayed
" to run shortly after."
send_delayed
" simply expires this window's entry inself._damage_delayed
dict by moving it to "self._damage_delayed_expired
" and tell the network code that a packet is ready.
When sending damage packets, we pick them from the expired list first (if any) or from the regular damage list otherwise.So for example, when the screen suddenly starts updating rapidly, we will fill up
self._damage_last_events
, and when it reaches the batching limit we will create a newdamage_delayed
entry and append all new damage regions to it untilsend_delayed
fires. After it does fire (and assuming the fast screen updates continue), a new one will be created and the same process will continue.
When the screen updates slow down, the last few updates will continue to get added to the currentdamage_delayed
entry untilsend_delayed
fires, after that they will fire directly as "damage_now
". The order will be preserved since we pick the expired ones ahead of the regular ones...
from xpra.
2011-11-06 09:49:29: antoine
from xpra.
2011-11-06 15:10:29: ddoole uploaded file q12.sql.basic.mod.exfmt
(83.8 KiB)
from xpra.
2011-11-06 15:20:35: ddoole commented
I attached the file q12.sql.basic.mod.exfmt to this bug. To reproduce the problem, all I have to do is:
- gvim q12.sql.basic.mod.exfmt
- Maximize the gvim window
- Start using to scroll through the file.
The drawing problem occurs on the third page of the file, where the tree structure is being drawn and fills the whole screen.
Some observations:
- When I first reported this bug, it was rather random when it would happen. With this new occurrence, it is very reproducible.
- Screen resolution doesn't seem to matter, but the gvim window must be maximized.
- The drawing problem only appears when scrolling down through the file. Scrolling up doesn't cause the problem.
- Not all files exhibit this problem. I've got another file with a very similar graph and it displays properly.
from xpra.
2011-11-07 17:24:28: antoine uploaded file xpra-show-damage-sequence.patch
(5.7 KiB)
adds debug output to allow us to verify damage sequence numbers
from xpra.
2011-11-07 17:31:01: antoine commented
I have tried scrolling with , with just , etc... and cannot reproduce with gvim... I have tried with debug on or off, etc. Screen size 1920x1080
The attached patch was used to verify the sequence of the damage packets, and confirms that the packets are received in the correct order (same order as the damage events). So the problem must be somewhere else...
When this does occur, is it possible to get it to redraw the screen region that are messed up without using the "refresh" menu option?
from xpra.
2011-11-08 14:24:58: ddoole commented
I have seen the problem on 4 different screen sizes: 1280x1024, 1600x1200, 1680x1050, 1920x1200. However, in all cases the client has been running nVidia's twinview over two screens and the maximized window was filling just one of the monitors. I'll try again with a system that has only one monitor on it, but it may take me a day or two to get the test done.
I hadn't played with the "refresh" option this time, and surprisingly, using the "refresh" option does not clear up the bad drawing. It may or may not cause some small parts of the problem area to redraw, but the majority of the window is still incorrect.
So far the only reliable way I have found to fix the display is to hit , . (, generally leads to the same bad display.)
from xpra.
2011-11-08 14:44:30: ddoole commented
Aha. I think I just found the significant aspect of this problem. When I am looking at that file, I'm using a 3 tier setup.
I use the xpra client to display a konsole window at the xpra server. In the konsole, I do "ssh -X final_machine".
When I gvim the file at the final machine, I get the screen corruption problem. If I bring the file to my xpra server and gvim it there, I do not get the problem.
Sorry, I should have tried removing the extra layer sooner. I have everything hidden behind scripts and generally don't think of the network connections. (This is the first time the extra layer has been an issue. Both my initial report of drawing issues as well as the cursor left/down problem in #36 behave the same whether I have the 3rd tier or not.)
from xpra.
2011-11-09 04:16:24: antoine commented
That is very strange, I don't understand why the ssh X11 forwarding would cause screen corruption...
Could be an interaction between Xvfb and ssh-X11 I guess, have you tried using Xdummy to see if that helps? (#10)
from xpra.
2011-11-09 16:35:05: ddoole commented
I'll take a look at Xdummy, but it might take me a couple days to get to it.
In any case, this seems to be a different issue than the one you fixed. Would you prefer to close off this ticket as fixed, and track this ssh forwarding issue in a new ticket?
from xpra.
2011-11-09 16:55:41: antoine commented
Hmm, let's leave it here for now, as turning
BATCH_EVENTS
off solves the issue... this seems to indicate a bug in the damage batching code (although it may still be something else, like a race made more likely with it enabled)(FYI: there are Xdummy packages in ticket #10)
from xpra.
2011-11-15 22:49:33: ddoole commented
I seem to be having trouble with my Xdummy configuration.
In the server log file I see Xdummy starting up, and there are no error messages, but I never get the "xpra is ready message".
After that, I am unable to connect to the server ("[Errno 2] No such file or directory"), nor can I stop xpra ("cannot find a live server to connect to").
In my process list, I can see both an xpra process and an Xorg-Xdummy process running.
There is nothing in my /var/log/Xorg.1.log file.
from xpra.
2011-11-16 04:55:56: antoine commented
There should be nothing in you /var/log/Xorg.1.log file since this is not the logfile that should be used.
Can you paste the exact commands that you tried to use? (see comment:3 in #10)This should work:
xpra start :100 --no-daemon --enable-mmap \ --xvfb="/usr/local/bin/Xdummy +extension GLX +extension RANDR -config /usr/share/winswitch/xorg-xdummy-xpra.conf -logfile $HOME/Xorg-test.log"
from xpra.
2011-11-16 17:27:46: ddoole commented
I was using a simpler line:
xpra start :1 --xvfb=/opt/xpra/Xdummy/Xdummy-xpra
Your longer line didn't make any difference. (As an aside, --enable-mmap wasn't recognized in my build.)
After playing a bit, I think Xdummy is hanging part way through its initialization - there's not enough output or in the log file.
Most interestingly, when I kill xpra with ctrl-c (assuming I used --no-daemon), Xdummy responds with:
Fatal server error:
xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)I am running xpra on a VM on a machine in a server room - its entirely possible that the machine does not have a keyboard or monitor attached to it.
from xpra.
2011-11-16 20:24:22: ddoole commented
I found the problem. I stopped using the Xdummy-xpra script and just called Xdummy directly. This got me past the hang and tty problems.
from xpra.
2011-11-16 20:31:17: ddoole commented
Unfortunately, using Xdummy does not solve the repainting problems.
from xpra.
2011-11-23 09:25:29: totaam commented
Although I have not been able to identify the cause of the corruption, I have seen it (but very rarely), the changes introduced in r284 (threaded server) seem to avoid it. Whether the problem is truly gone or much harder to trigger is not entirely clear...
Please let me know if this helps.
from xpra.
2011-11-23 15:20:24: ddoole commented
I probably won't be able to try out r284 this week.
However, a new symptom to report: I just encountered screen corruption using full screen vi even though I have "BATCH_EVENTS = false" in my server.py file.
from xpra.
2011-11-24 15:33:27: ddoole commented
I gave r284 a try. It looks like one step forward, and a half step back.
When testing with "vi q12.sql.basic.mod.exfmt", I was unable to reproduce the screen corruption. So that's definitely good news.
However, when I maximized the vi window, only the window border maximized. The displayed text and the scroll bar remained the same size, but moved to the upper left corner of the screen. (See screen-1124.jpg.) The contents of the window did not respond to mouse or keyboard. Using the refresh menu option did not help either. However, once I minimized the window and restored it, it worked properly.
So r284 is definitely a step in the right direction, but something still isn't quite right.
from xpra.
2011-11-24 15:34:09: ddoole uploaded file screen-1124.jpg
(192.6 KiB)
from xpra.
2011-11-24 15:41:33: totaam commented
Was this on r284 or r292 ?
There were a number of changes in this area recently so I suspect this may be the latter?
from xpra.
2011-11-24 15:52:42: totaam commented
Hmmm, can't reproduce this here at all, here's how I am testing:
xpra start :7 DISPLAY:7 gvim ./Downloads/q12.sql.basic.mod.exfmt xpra attach :7
Then I just scroll a few pages down and maximize the window?
Am I missing something? Is it 100% reproducible? Anything in the client or server log?
from xpra.
2011-11-24 16:08:04: ddoole commented
I tested on r284. However I just pulled down r292 and it exhibits the same behaviour.
The server log showed a couple "Uh-oh, our size doesn't fit our window sizing constraints!" messages when I opened vi. I didn't see any additional messages when I maximized the window.
I didn't see any messages on the client.
As mentioned in my earlier description, I'm using a 3 tier setup:
xpra client --ssh--> xpra server --ssh X forwarding--> work machine
If I edit the file directly at the xpra server, I don't have any screen problems. I only see the trouble when I do "ssh -X" from the xpra server to the work machine, and then edit the file on the work machine.
from xpra.
2011-11-24 16:36:36: totaam commented
OK, I've tried that too, and still cannot get it to misbehave...
- Do you think latency is an issue here? Do I need to test on a host with high latency? What is the ping time between your xpra server and your work machine?
- Does using the
--auto-refresh-delay=DELAY
option (with short and long delays) eventually redraw the screen properly?- When the screen corruption does occur, can you take a screenshot of xpra's
Xvfb
display and see if the corruption is also present there? (ie: "DISPLAY=:100 scrot
")
from xpra.
2011-11-24 18:09:53: ddoole commented
- This is not a high latency connection. All three machines are in the same building and we have a high speed network. Ping times averaged about 0.25 ms.
- I tried delays of 0.1, 1 and 10 and it didn't have any effect.
- The screen shot showed the same corruption. (See attached 2011-11-24-130321_3840x2560_scrot.png)
from xpra.
2011-11-24 18:10:14: ddoole uploaded file 2011-11-24-130321_3840x2560_scrot.png
(134.7 KiB)
from xpra.
2011-11-24 18:13:29: ddoole commented
Whoops, need to amend my comment about the screen shot - I'd pulled up the wrong file.
The Xvfb screen shot just shows a black rectangle - nothing like what I'm seeing on the screen.
from xpra.
2011-11-24 18:13:29: ddoole
from xpra.
2011-11-24 18:55:44: totaam commented
Yes, silly me, the screenshot cannot show the window contents since those are captured/redirected by xpra...
When I resize the window, I do see something similar to your screenshot before the full-screen update arrives - takes a split second. Now, I really need a way to reproduce this problem here before I can fix it...
I noticed that you have a fairly large screen size, can you confirm if your problem is reproducible at lower resolutions too? Maybe there is an overflow of some sort at high resolutions?
from xpra.
2011-11-24 19:17:11: ddoole commented
3840x2560 is the default size for the Xvfb session - I don't change it.
In the past, I've tried things with a bunch of different physical screen sizes at the client (see comment:12) and it didn't make a difference. Admittedly, I haven't tried those experiments with the current problem.
So, did you want me to try with a different physical screen size at the client, or did you want me to try requesting a different resolution for Xvfb?
from xpra.
2011-11-24 19:24:20: totaam commented
Well, the Xvfb size should not really matter (as long as it is large enough obviously) so it would be nice to confirm that this problem is not related to your large physical screen size somehow.
I don't understand why it would cause problems since the data does get there when you re-connect (right?), but this patch splits large requests into sub-regions - maybe it will help:
Index: xpra/server.py =================================================================== --- xpra/server.py (revision 295) +++ xpra/server.py (working copy) @@ -331,19 +331,29 @@ except Exception, e: log.error("damage_to_data: error processing region %s: %s", damage, e) continue - gobject.idle_add(self._process_damage_regions, id, window, regions) + gobject.idle_add(self._process_damage_regions, id, window, ww, wh, regions) - def _process_damage_regions(self, id, window, regions): + def _process_damage_regions(self, id, window, ww, wh, regions): # It's important to acknowledge changes *before* we extract them, # to avoid a race condition. - log("damage_to_data: regions=%s, sending damage ack", regions) + log.info("damage_to_data: regions=%s, sending damage ack", regions) window.acknowledge_changes() pixmap = window.get_property("client-contents") if pixmap is None: log.error("wtf, pixmap is None?") return - log("damage_to_data: pixmap size=%s", pixmap.get_size()) - #TODO: here we could split a single large full_window update into chunks... + log.info("damage_to_data: pixmap size=%s, window size=%s", pixmap.get_size(), (ww, wh)) + if len(regions)==1: + (x, y, w, h, full_window) = regions[0] + if full_window and w*h>=512*512: + #split the single large full screen region: + regions = [] + while y<wh: + h = min(512, wh-y) + regions.append((x,y,w,h,False)) + y += 512 + log.info("process_damage_regions: split full window update into: %s" % regions) + for region in regions: (x, y, w, h, full_window) = region if full_window:
from xpra.
2011-11-24 20:00:15: ddoole commented
I tried your patch, and it didn't help. (I did capture the log in case it will be helpful.)
I also restarted my laptop so that it only had the local screen (1680x1050). That didn't help either.
from xpra.
2011-11-25 11:34:17: totaam commented
OK, I managed to get it to misbehave with a simple local connection and it seemed 100% reproducible at the time... but since then I have not been able to reproduce it again!?
For reference, it did completely stop redrawing anything, but in some cases I was able to make it resume by focusing in/out or re-attaching.
On the plus side, it did force me to investigate a few areas and I have found things that needed improvement, hopefully one of those will include your fix:
- r302: request the new window contents after resizing it!
- r303: try harder to cancel the damage requests that we can still withdraw (not an actual bug - but will leave fewer damage requests to debug/inspect)
- r300: use the "actual-size" of the window if available as "geometry" is sometimes wrong!? (not that it should really matter for this particular bug since we should be sending the full pixmap anyway...)
If you still get the same problem with r305 (includes a few logging tweaks on top), it would be very interesting if you could post:
- the server output in "
-d all
" mode egrepped for "resize_window
", "process_damage_regions
", "data_to_packet
" and "write thread
"- the client log with the small patch below to confirm the client is receiving all the damage data
If at all possible, starting just before the problem occurs as this will be quite long otherwise.
After seeing this bug for myself, I now suspect it is some sort of deadlock in the new threaded code, so I will review this thoroughly before making the new release.
Client debugging patch:
Index: xpra/client.py =================================================================== --- xpra/client.py (revision 298) +++ xpra/client.py (working copy) @@ -813,6 +813,7 @@ else: packet_sequence = None window = self._id_to_window[id] + log.info("drawing %s", (x,y,width,height)) window.draw(x, y, width, height, coding, data) if packet_sequence and self.send_damage_sequence: self.send_now(["damage-sequence", packet_sequence])
from xpra.
2011-11-25 16:47:04: ddoole commented
I moved to r305 and I am still seeing the problem.
To capture the log data, I established my connections, loaded up vi and then marked the logs. Then I hit maximize. So I should only have captured log data from the maximize operation. (I may have caught disconnecting the client as well.)
For the lines you're interested in, the server only reported:
resize_window to 1590x1019, desktop manager set it to 1590x1019, visible=False write thread: empty marker, exiting write thread: ended, closing socket
Nothing was logged at the client.
In terms of recovering from the problem once it has occurred. I can get the window to redraw be either minimizing and then restoring the window, or dropping and reconnecting the client.
from xpra.
2011-11-25 17:10:13: totaam commented
OK, for some strange reason, Xpra thinks that your window is not visible and skips sending the new window data.
With my environment, the window is always shown asvisible=True
...
Is your window hidden when you maximize it? (and even so, it should still work..)Maybe this will workaround it (no guarantee), but I need to figure out why Xpra thinks that the window is not visible to be able to commit a proper fix:
(_, _, ww, wh) = self._desktop_manager.window_geometry(window) visible = self._desktop_manager.visible(window) log("resize_window to %sx%s, desktop manager set it to %sx%s, visible=%s", w, h, ww, wh, visible) - if visible: - self._damage(window, 0, 0, w, h) + #if visible: + self._damage(window, 0, 0, w, h) def _process_focus(self, proto, packet): if len(packet)==3:
from xpra.
2011-11-25 17:26:02: ddoole commented
My window is definitely visible. It is even sitting in front of all the other windows.
Commenting out the if visible check did not help.
from xpra.
2011-11-25 17:54:20: totaam changed status from accepted to closed
from xpra.
2011-11-25 17:54:20: totaam changed resolution from ** to fixed
from xpra.
2011-11-25 17:54:20: totaam commented
I am pretty sure the original issue can be closed now, as this is now a different bug: #48, please add details there.
If not, feel free to re-open.
from xpra.
2012-02-20 19:45:13: totaam
from xpra.
Related Issues (20)
- test pyqt6 client HOT 2
- late subsystem initialization HOT 1
- dbus at-spi splatter HOT 2
- poll the pointer location: make `xeyes` work HOT 2
- xpra desktop has psychotic update habits in a local terminal HOT 15
- gpg file xpra-6.1.1.tar.xz.gpg is empty on https://xpra.org/src/ HOT 1
- shadow desktop ceases to update when using `--desktop-scaling` < 100% HOT 17
- shadow desktop scaling broken for scaling < 100% HOT 6
- Unable to set window title HOT 2
- take content-type into account when choosing an upscaling sampling filter HOT 7
- Segmentation fault in WSL2 with Intel GPU VA-API HOT 12
- start-desktop does not work with cinnamon X11 session (black screen) HOT 9
- make it possible to completely disable all of GStreamer at runtime HOT 1
- downscale just once HOT 2
- pycuda 2024.1.2 fails to build on Fedora 41 HOT 2
- Is there a release/version available for 32bit windows? HOT 1
- Causing Debian GUI first login failure HOT 1
- system tray forwarding causes crash HOT 3
- invalid encoding for tray: 'rgb' - message repeating continuously HOT 1
- too many keyboard error messages HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from xpra.