Comments (11)
Have you tried to Power Cycle the Inverter?
from homeassistant-solax-modbus.
I feel a bit dumb saying that I had not power cycled it before but I did now and nothing changed sadly
from homeassistant-solax-modbus.
When you went to 0.4.10 did you install through HACS, download the release zip or clone the repository?
If you did a clone it could be possible you cloned while I was updating different files?
All I can recommend really is to remove the integration from the integration page.
Delete the custom_component from your HA reboot HA and try again.
If you keep the install name the same and use the same area location if set. It should all slot back into any automations etc.
from homeassistant-solax-modbus.
I downloaded the zip from the release page, deleted the directory in custom components ans replace them with the new ones. Did a restart of HA and because the integration showed errors I completely removed it from the integrations page and reconfigured it. The entities were picked up just like before as you said.
What you are suggesting now is completely removing everything, restarting and the reinstalling?
from homeassistant-solax-modbus.
Just the SolaX bits. Not sure what else could break it?
from homeassistant-solax-modbus.
The only time I had the inverter stop talking once was when I tried to connect to it from HA and at the same time trying to communicate with a Window Modbus software. The inverter didn't like it till I dropped all communications and rebooted everything including the Inverter.
Then I only communicated through HA to the Inverter.
from homeassistant-solax-modbus.
Did your Inverter start responding again to the Integration?
Have you tried any of the newer versions out like 0.4.13a or the pre-release 0.5.0b6?
from homeassistant-solax-modbus.
Hey, sorry for not responding for a couple of days. Illness and time issues...
Aynway the problem still persists and I just removed every trace of the old component and restarted HA.
After that I first tried 0.4.13a without luck.
With 0.5.0b6 I at least got an error message again:
2022-04-12 19:12:11 ERROR (MainThread) [custom_components.solax_modbus] cannot perform initial read for serial number
2022-04-12 19:12:11 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry SolaX for solax_modbus
Another weird behaviour which I observed is that I still get solar data in the energy dashboard and it seems correct. All the entities are unknown though so I don't know where this information comes from. The battery data is not displayed in the energy dashboard anymore though.
from homeassistant-solax-modbus.
I just went back to the full version 0.4.13a again as I saw some data in the history tab.
Looking a bit further into the history tab (I hope it is called that way in english) and I can actually find all the data I searched for.
And I can also see the data for the whole day and the last couple of days.
If I click on the device in the integration tab I don't see any data, nor do I see it in my lovelace dashboard. It just says that the data is not a numeric value.
The connection to the inverter seems to be working. No idea what is wrong then.
from homeassistant-solax-modbus.
Hey, the integration/connection magically started working again.
I have homeassistant running in a jail on my TrueNAS Server and I tried to install a Pcie so I restarted the whole server. After the restart it worked again.
Classic case of "Have you tried turning it off and on again?" I guess...
I hope it does not need that regularly because I don't really like to restart my NAS.
Thanks for you time anyway.
from homeassistant-solax-modbus.
Glad you are sorted. Let us know if you get anymore strange behaviours though!
I have only used Home Assistant on Synology Docker and Unraid.
from homeassistant-solax-modbus.
Related Issues (20)
- Broken in the latest HA version 2024.8.2 on Solis RHI 6k HOT 1
- [Bug]: X3 MIC voltage and frequency measurements have status "Unknown" in version 2024.08.8 HOT 1
- [Bug]: Solis - S5-EH1P3.6K-L "Timed Charge / Discharge Current" update breaks communication HOT 4
- [Bug]: Unable to add Solax X3 Hybrid G4 15.0 with version 2024.8.10 HOT 8
- [Bug]: Failed to perform the action number/set_value. Modbus Error: [Input/Output] ERROR: No response received after 6 retries HOT 1
- [Bug]:unable to add Solax X3 MIC G2 HOT 2
- [Bug]: 'SOFAR' - 'HYD10' device group check not success HOT 6
- [Bug]: wrong Hardware Generation and wrong Frimware for Solax X3-Hybrid G2 HOT 1
- [Bug]: 'Growatt' - 'SPH6000' 2024.8.* Not able to add Inverter HOT 5
- Solis - entity name changes after upgrading to 2024.8.12 HOT 5
- [Bug]: "SolaX Inverter Battery Charge Upper SOC" can't be set by the Integration HOT 10
- [Bug]: after update no configuration of new hub just hangs HOT 3
- Bug: Sofar - 3PH HYD8000 ZSS inverter not recognized after upgrade to 2024.08.13 HOT 1
- All sensors in "Unknown" State after 2024.08 upgrade HOT 10
- [Bug]: Entities unavailable after Upgrade to 2024.08.14 (IP integration) HOT 2
- [Bug]: Broken Export Control setting for SolaX X3-Ultra HOT 3
- [Bug]: 2024.8.8 Cannot add inverter again via serial after upgrade to 2024.8.8 HOT 2
- [Bug]: Unable to add Solax X3-Ultra 15k with version 2024.8.8 HOT 6
- [Bug]: Can not control values from HA HOT 24
- [Bug]: 'Solis' - 'RAI-3K-48ES-5G ' Solar Power values not returned
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from homeassistant-solax-modbus.