Sound Canvas SC-55 about 18bit-dit HOT 9 OPEN

According to SC55 service manual, you should look at DAC IC7 - UPD6376, where13pin@IC7 - LRCK(WCLK), 15pin@IC7 - SDATA, 16pin@IC7 - BCLK.

SC-55 is described as 16bit 32kHz, for that bit clock should be (16x2x32000)=1.024MHz, and the master clock must be bclk x2 or bclk x4 or x8 or x16. Reset line can be found at IC21 pin 21 or IC31 pin 1.

Master clock needs to be found at the clk pins mentioned in service manual, without real device i can't say for sure which line is valid for that.

from 18bit-dit.

Ok, I will try using your informations.

Thanks for your work/project and support!

from 18bit-dit.

Don't forget that you must configure dif0-dif2 , fs0-fs3 according to 16bit right justified , 32kHz, and cks0-cks1 according to mclk/lrck divide.

from 18bit-dit.

Yes, already noticed, thank you!

Still waiting for the boards/components...

Once I try I'll report my findings.

from 18bit-dit.

Just for attention, in neighbor issue we found that the MCLK pin also can be feed with BCK line. It works.

from 18bit-dit.

Thanks! Unfortunately I'm still waiting for the chips... eBay supplier was a scam, let's hope I have more luck from AliExpress...

from 18bit-dit.

I ordered from Ali 3 weeks ago, and the chips are already in country going to my city.

from 18bit-dit.

Thanks! Unfortunately I'm still waiting for the chips... eBay supplier was a scam, let's hope I have more luck from AliExpress...

So, any news, have you tried the mod?

from 18bit-dit.

Got the parts, will try in a few days...

from 18bit-dit.