TypeError: unsupported operand type(s) for -: 'str' and 'int' about print_area_bed_mesh HOT 4 CLOSED

Yes, they're needed in both macros since the slicer passes the arguments to the start_print macro and the start_print macro passes the argument to the bed_mesh_calibrate macro.

I just (hopefully) fixed the error. Can you please update the macro and try again?

If you're still having issues, can you attach your klippy.log?

from print_area_bed_mesh.

!! bed_mesh: invalid probe_count option when using bicubic interpolation. Combination of 3 points on one axis with more than 6 on another is not permitted. Configured Probe Count: 3, 7

Using a 7x7 as default.
Changed the default to 6x6 and it works.

I am trying to read the cfg is there a safeguard if the print is as big as a bed? As you have a buffer wouldn't that go over?

Edit: Used without variable_parameter_PRINT_MIN : 0,0 and variable_parameter_PRINT_MAX : 0,0 inside the START_PRINT macro and works fine.

from print_area_bed_mesh.

@WickedInvi I'm looking into this. Someone else just reported the issue and I'll be changing the minimum probe points to 5 when bicubic is used.

from print_area_bed_mesh.

BTW, this should now be fixed.

from print_area_bed_mesh.