HT420-A Tweezers support about jbc-soldering-controller HOT 7 OPEN

If you have a look at the branch I made, there is code for tweezers. I designed it for PA120 tweezers, not 420. I have a feeling the maximum voltage is higher on the 420, so it would be worth checking it will work.
In any case, the code is there if you want it.
p.s. my PCB design is not great. my plan is do redo it.
https://github.com/PaulusSmallus/JBC-Soldering-Controller

from jbc-soldering-controller.

I want do it to
can we do it together？
[email protected]

from jbc-soldering-controller.

Just to update, according to this the HT420 will run off 24V, so it should work.

I just tried some PA120 tweezers and it almost works, but it needs calibrating. It seems to be a different type of thermocouple. You will need to detect the different types of irons, so you can use different calibration data.

from jbc-soldering-controller.

Thanks for the update!
I started with the PCB design but I'm busy with some other projects. I hope I will be ready until the end of this year.

from jbc-soldering-controller.

Hello liu wei,
I am sure there is something you can help with. What are you good at?

from jbc-soldering-controller.

I am a chinese, everything the project need is so easy and cheap to get .
I redesign your sch by orcad. Meger the arduino in the main board .
I have a team with my friend include the software and hareware ,structure .

Can we design a product with comparable or even better performance than JBC?

from jbc-soldering-controller.

According to this licence, you can use this for commercial purposes as long as you include the same licence agreement.

from jbc-soldering-controller.