Comments (26)
ThoughtfulDev
commented on August 30, 2024
From the Folder where the eagleeye is located:
$ sudo apt install cmake
$ sudo pip3 install -r requirements.txt
I suggest that you read the Install Instructions - How to use it
from eagleeye.
20chix
commented on August 30, 2024
I think is something related to geckodriver, I downloaded it, but not sure how to install it?
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
There is not need to start the geckodriver.
Just download it and make it executable. There is no need to "install" the geckodriver
Then edit the config.json to point to the path of your geckodriver and start eagle-eye.
from eagleeye.
20chix
commented on August 30, 2024
where can I find config.json file in linux?
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
The config.json is in the repository...as i said have a look at How to use
from eagleeye.
20chix
commented on August 30, 2024
Still getting the same error, followed at the letter README but still the same.
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
Thats because the sudo pip3 install -r requirements.txt failed. Did you have cmake installed?
Please post the whole pip error log.
from eagleeye.
20chix
commented on August 30, 2024
I installed Cmake,trying to upgrade python to 9.0.1
where is the error log?
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
I saw some of the log in the last screen at the top.
Just do a sudo pip3 install -r requirements.txt from inside the eagle-eye directory and wait. if some errors popup paste the terminal output in here in a code tag.
from eagleeye.
20chix
commented on August 30, 2024
` Complete output from command python setup.py egg_info:
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libffi' found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libffi' found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libffi' found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libffi' found
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libffi' found
c/_cffi_backend.c:15:17: fatal error: ffi.h: No such file or directory
compilation terminated.
Traceback (most recent call last):
File "/usr/lib/python3.5/distutils/unixccompiler.py", line 118, in _compile
extra_postargs)
File "/usr/lib/python3.5/distutils/ccompiler.py", line 909, in spawn
spawn(cmd, dry_run=self.dry_run)
File "/usr/lib/python3.5/distutils/spawn.py", line 36, in spawn
_spawn_posix(cmd, search_path, dry_run=dry_run)
File "/usr/lib/python3.5/distutils/spawn.py", line 159, in _spawn_posix
% (cmd, exit_status))
distutils.errors.DistutilsExecError: command 'x86_64-linux-gnu-gcc' failed with exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.5/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.5/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/bdist_egg.py", line 161, in run
cmd = self.call_command('install_lib', warn_dir=0)
File "/usr/lib/python3/dist-packages/setuptools/command/bdist_egg.py", line 147, in call_command
self.run_command(cmdname)
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install_lib.py", line 23, in run
self.build()
File "/usr/lib/python3.5/distutils/command/install_lib.py", line 109, in build
self.run_command('build_ext')
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/build_ext.py", line 49, in run
_build_ext.run(self)
File "/usr/lib/python3.5/distutils/command/build_ext.py", line 338, in run
self.build_extensions()
File "/usr/lib/python3.5/distutils/command/build_ext.py", line 447, in build_extensions
self._build_extensions_serial()
File "/usr/lib/python3.5/distutils/command/build_ext.py", line 472, in _build_extensions_serial
self.build_extension(ext)
File "/usr/lib/python3/dist-packages/setuptools/command/build_ext.py", line 174, in build_extension
_build_ext.build_extension(self, ext)
File "/usr/lib/python3.5/distutils/command/build_ext.py", line 532, in build_extension
depends=ext.depends)
File "/usr/lib/python3.5/distutils/ccompiler.py", line 574, in compile
self._compile(obj, src, ext, cc_args, extra_postargs, pp_opts)
File "/usr/lib/python3.5/distutils/unixccompiler.py", line 120, in _compile
raise CompileError(msg)
distutils.errors.CompileError: command 'x86_64-linux-gnu-gcc' failed with exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 154, in save_modules
yield saved
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 195, in setup_context
yield
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 243, in run_setup
DirectorySandbox(setup_dir).run(runner)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 273, in run
return func()
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 242, in runner
_execfile(setup_script, ns)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 46, in _execfile
exec(code, globals, locals)
File "/tmp/easy_install-0e76gh6l/cffi-1.11.5/setup.py", line 240, in <module>
File "/usr/lib/python3.5/distutils/core.py", line 163, in setup
raise SystemExit("error: " + str(msg))
SystemExit: error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1087, in run_setup
run_setup(setup_script, args)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 246, in run_setup
raise
File "/usr/lib/python3.5/contextlib.py", line 77, in __exit__
self.gen.throw(type, value, traceback)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 195, in setup_context
yield
File "/usr/lib/python3.5/contextlib.py", line 77, in __exit__
self.gen.throw(type, value, traceback)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 166, in save_modules
saved_exc.resume()
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 141, in resume
six.reraise(type, exc, self._tb)
File "/usr/lib/python3/dist-packages/pkg_resources/_vendor/six.py", line 685, in reraise
raise value.with_traceback(tb)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 154, in save_modules
yield saved
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 195, in setup_context
yield
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 243, in run_setup
DirectorySandbox(setup_dir).run(runner)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 273, in run
return func()
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 242, in runner
_execfile(setup_script, ns)
File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 46, in _execfile
exec(code, globals, locals)
File "/tmp/easy_install-0e76gh6l/cffi-1.11.5/setup.py", line 240, in <module>
File "/usr/lib/python3.5/distutils/core.py", line 163, in setup
raise SystemExit("error: " + str(msg))
SystemExit: error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-build-itu18mrq/cairocffi/setup.py", line 44, in <module>
extras_require={'xcb': ['xcffib>=0.3.2']},
File "/usr/lib/python3.5/distutils/core.py", line 108, in setup
_setup_distribution = dist = klass(attrs)
File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 269, in __init__
self.fetch_build_eggs(attrs['setup_requires'])
File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 313, in fetch_build_eggs
replace_conflicting=True,
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 826, in resolve
dist = best[req.key] = env.best_match(req, ws, installer)
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 1092, in best_match
return self.obtain(req, installer)
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 1104, in obtain
return installer(requirement)
File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 380, in fetch_build_egg
return cmd.easy_install(req)
File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 663, in easy_install
return self.install_item(spec, dist.location, tmpdir, deps)
File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 693, in install_item
dists = self.install_eggs(spec, download, tmpdir)
File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 873, in install_eggs
return self.build_and_install(setup_script, setup_base)
File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1101, in build_and_install
self.run_setup(setup_script, setup_base, args)
File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1089, in run_setup
raise DistutilsError("Setup script exited with %s" % (v.args[0],))
distutils.errors.DistutilsError: Setup script exited with error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-itu18mrq/cairocffi/
`
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
This should solve it
sudo apt install libffi-dev
After that the pip install should work.
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
So here is the full Update Installation instructions which should work:
$ git clone https://github.com/ThoughtfulDev/EagleEye
$ sudo apt install cmake libffi-dev
$ cd EagleEye && pip3 install -r requirements.txt
$ pip3 install --upgrade beautifulsoup4 html5lib
$ pip3 install spry
Please report back :)
from eagleeye.
20chix
commented on August 30, 2024
`ros@ros-VirtualBox:~/Downloads/EagleEye$ sudo pip3 install -r requirements.txt
[sudo] password for ros:
The directory '/home/ros/.cache/pip/http' or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag.
The directory '/home/ros/.cache/pip' or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo's -H flag.
Requirement already satisfied: urllib3 in /usr/lib/python3/dist-packages (from -r requirements.txt (line 1))
Collecting termcolor (from -r requirements.txt (line 2))
Collecting opencv-python (from -r requirements.txt (line 3))
Downloading opencv_python-3.4.0.12-cp35-cp35m-manylinux1_x86_64.whl (24.9MB)
100% |████████████████████████████████| 24.9MB 55kB/s
Collecting selenium (from -r requirements.txt (line 4))
Downloading selenium-3.9.0-py2.py3-none-any.whl (942kB)
100% |████████████████████████████████| 952kB 636kB/s
Collecting face_recognition (from -r requirements.txt (line 5))
Downloading face_recognition-1.2.1-py2.py3-none-any.whl
Collecting WeasyPrint (from -r requirements.txt (line 6))
Downloading WeasyPrint-0.42.2-py3-none-any.whl (296kB)
100% |████████████████████████████████| 296kB 1.3MB/s
Collecting instalooter (from -r requirements.txt (line 7))
Downloading instaLooter-0.14.0-py2.py3-none-any.whl
Collecting numpy>=1.11.1 (from opencv-python->-r requirements.txt (line 3))
Downloading numpy-1.14.1-cp35-cp35m-manylinux1_x86_64.whl (12.1MB)
100% |████████████████████████████████| 12.1MB 108kB/s
Collecting scipy>=0.17.0 (from face_recognition->-r requirements.txt (line 5))
Downloading scipy-1.0.0-cp35-cp35m-manylinux1_x86_64.whl (49.6MB)
100% |████████████████████████████████| 49.6MB 27kB/s
Requirement already satisfied: Pillow in /usr/lib/python3/dist-packages (from face_recognition->-r requirements.txt (line 5))
Collecting dlib>=19.7 (from face_recognition->-r requirements.txt (line 5))
Downloading dlib-19.9.0.tar.gz (3.1MB)
100% |████████████████████████████████| 3.1MB 318kB/s
Collecting Click>=6.0 (from face_recognition->-r requirements.txt (line 5))
Downloading click-6.7-py2.py3-none-any.whl (71kB)
100% |████████████████████████████████| 71kB 1.7MB/s
Collecting face-recognition-models>=0.3.0 (from face_recognition->-r requirements.txt (line 5))
Downloading face_recognition_models-0.3.0.tar.gz (100.1MB)
100% |████████████████████████████████| 100.2MB 13kB/s
Collecting CairoSVG>=1.0.20; python_version >= "3.0" (from WeasyPrint->-r requirements.txt (line 6))
Downloading CairoSVG-2.1.3-py3-none-any.whl (101kB)
100% |████████████████████████████████| 102kB 2.2MB/s
Collecting cffi>=0.6 (from WeasyPrint->-r requirements.txt (line 6))
Downloading cffi-1.11.5-cp35-cp35m-manylinux1_x86_64.whl (420kB)
100% |████████████████████████████████| 430kB 978kB/s
Collecting cssselect2>=0.1 (from WeasyPrint->-r requirements.txt (line 6))
Downloading cssselect2-0.2.1-py2.py3-none-any.whl
Collecting tinycss2>=0.5 (from WeasyPrint->-r requirements.txt (line 6))
Downloading tinycss2-0.6.1-py2.py3-none-any.whl (61kB)
100% |████████████████████████████████| 71kB 2.1MB/s
Collecting Pyphen>=0.8 (from WeasyPrint->-r requirements.txt (line 6))
Downloading Pyphen-0.9.4-py2.py3-none-any.whl (1.9MB)
100% |████████████████████████████████| 2.0MB 390kB/s
Collecting cairocffi>=0.5 (from WeasyPrint->-r requirements.txt (line 6))
Collecting pdfrw>=0.4 (from WeasyPrint->-r requirements.txt (line 6))
Downloading pdfrw-0.4-py2.py3-none-any.whl (69kB)
100% |████████████████████████████████| 71kB 1.5MB/s
Collecting html5lib>=0.999999999 (from WeasyPrint->-r requirements.txt (line 6))
Downloading html5lib-1.0.1-py2.py3-none-any.whl (117kB)
100% |████████████████████████████████| 122kB 1.5MB/s
Collecting requests~=2.18 (from instalooter->-r requirements.txt (line 7))
Downloading requests-2.18.4-py2.py3-none-any.whl (88kB)
100% |████████████████████████████████| 92kB 2.0MB/s
Collecting python-dateutil~=2.1 (from instalooter->-r requirements.txt (line 7))
Downloading python_dateutil-2.6.1-py2.py3-none-any.whl (194kB)
100% |████████████████████████████████| 194kB 1.5MB/s
Collecting progressbar2~=3.1 (from instalooter->-r requirements.txt (line 7))
Downloading progressbar2-3.35.2-py2.py3-none-any.whl
Requirement already satisfied: six~=1.4 in /usr/lib/python3/dist-packages (from instalooter->-r requirements.txt (line 7))
Collecting hues<1,>=0.2.2 (from instalooter->-r requirements.txt (line 7))
Downloading hues-0.2.2-py3-none-any.whl
Requirement already satisfied: beautifulsoup4~=4.4 in /usr/lib/python3/dist-packages (from instalooter->-r requirements.txt (line 7))
Collecting docopt~=0.4 (from instalooter->-r requirements.txt (line 7))
Collecting defusedxml (from CairoSVG>=1.0.20; python_version >= "3.0"->WeasyPrint->-r requirements.txt (line 6))
Downloading defusedxml-0.5.0-py2.py3-none-any.whl
Collecting pycparser (from cffi>=0.6->WeasyPrint->-r requirements.txt (line 6))
Collecting webencodings>=0.4 (from tinycss2>=0.5->WeasyPrint->-r requirements.txt (line 6))
Downloading webencodings-0.5.1-py2.py3-none-any.whl
Collecting certifi>=2017.4.17 (from requests~=2.18->instalooter->-r requirements.txt (line 7))
Downloading certifi-2018.1.18-py2.py3-none-any.whl (151kB)
100% |████████████████████████████████| 153kB 1.8MB/s
Collecting chardet<3.1.0,>=3.0.2 (from requests~=2.18->instalooter->-r requirements.txt (line 7))
Downloading chardet-3.0.4-py2.py3-none-any.whl (133kB)
100% |████████████████████████████████| 143kB 812kB/s
Collecting idna<2.7,>=2.5 (from requests~=2.18->instalooter->-r requirements.txt (line 7))
Downloading idna-2.6-py2.py3-none-any.whl (56kB)
100% |████████████████████████████████| 61kB 1.9MB/s
Collecting python-utils>=2.3.0 (from progressbar2~=3.1->instalooter->-r requirements.txt (line 7))
Downloading python_utils-2.3.0-py2.py3-none-any.whl
Collecting PyYAML (from hues<1,>=0.2.2->instalooter->-r requirements.txt (line 7))
Installing collected packages: termcolor, numpy, opencv-python, selenium, scipy, dlib, Click, face-recognition-models, face-recognition, webencodings, tinycss2, cssselect2, defusedxml, pycparser, cffi, cairocffi, CairoSVG, Pyphen, pdfrw, html5lib, WeasyPrint, certifi, chardet, idna, requests, python-dateutil, python-utils, progressbar2, PyYAML, hues, docopt, instalooter
Running setup.py install for dlib ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-61bjkblz/dlib/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-q0ealcj_-record/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
package init file 'dlib/__init__.py' not found (or not a regular file)
running build_ext
Invoking CMake setup: 'cmake /tmp/pip-build-61bjkblz/dlib/tools/python -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=/tmp/pip-build-61bjkblz/dlib/build/lib.linux-x86_64-3.5 -DPYTHON_EXECUTABLE=/usr/bin/python3 -DCMAKE_BUILD_TYPE=Release'
-- The C compiler identification is GNU 5.4.0
-- The CXX compiler identification is GNU 5.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PythonInterp: /usr/bin/python3 (found version "3.5.2")
-- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.5m.so
-- Performing Test HAS_CPP14_FLAG
-- Performing Test HAS_CPP14_FLAG - Success
-- pybind11 v2.3.dev0
-- Enabling SSE4 instructions
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Looking for XOpenDisplay in /usr/lib/x86_64-linux-gnu/libX11.so;/usr/lib/x86_64-linux-gnu/libXext.so
-- Looking for XOpenDisplay in /usr/lib/x86_64-linux-gnu/libX11.so;/usr/lib/x86_64-linux-gnu/libXext.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib/x86_64-linux-gnu/libX11.so
-- Looking for png_create_read_struct
-- Looking for png_create_read_struct - found
-- Looking for jpeg_read_header
-- Looking for jpeg_read_header - found
-- Searching for BLAS and LAPACK
-- Searching for BLAS and LAPACK
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1")
-- Checking for module 'cblas'
-- No package 'cblas' found
-- Checking for module 'lapack'
-- Found lapack, version 3.6.0
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of void*
-- Check size of void* - done
-- Found LAPACK library
-- Found BLAS library
-- Looking for cblas_ddot
-- Looking for cblas_ddot - found
-- Looking for sgesv
-- Looking for sgesv - not found
-- Looking for sgesv_
-- Looking for sgesv_ - found
CUDA_TOOLKIT_ROOT_DIR not found or specified
-- Could NOT find CUDA (missing: CUDA_TOOLKIT_ROOT_DIR CUDA_NVCC_EXECUTABLE CUDA_INCLUDE_DIRS CUDA_CUDART_LIBRARY) (Required is at least version "7.5")
-- Disabling CUDA support for dlib. DLIB WILL NOT USE CUDA
-- C++11 activated.
-- Found Python with installed numpy package
-- Numpy include path '/usr/local/lib/python3.5/dist-packages/numpy/core/include'
-- Performing Test HAS_FLTO
-- Performing Test HAS_FLTO - Success
-- LTO enabled
-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/pip-build-61bjkblz/dlib/build/temp.linux-x86_64-3.5
Invoking CMake build: 'cmake --build . --config Release -- -j1'
Scanning dependencies of target dlib
[ 1%] Building CXX object dlib_build/CMakeFiles/dlib.dir/base64/base64_kernel_1.cpp.o
[ 2%] Building CXX object dlib_build/CMakeFiles/dlib.dir/bigint/bigint_kernel_1.cpp.o
[ 3%] Building CXX object dlib_build/CMakeFiles/dlib.dir/bigint/bigint_kernel_2.cpp.o
[ 5%] Building CXX object dlib_build/CMakeFiles/dlib.dir/bit_stream/bit_stream_kernel_1.cpp.o
[ 6%] Building CXX object dlib_build/CMakeFiles/dlib.dir/entropy_decoder/entropy_decoder_kernel_1.cpp.o
[ 7%] Building CXX object dlib_build/CMakeFiles/dlib.dir/entropy_decoder/entropy_decoder_kernel_2.cpp.o
[ 8%] Building CXX object dlib_build/CMakeFiles/dlib.dir/entropy_encoder/entropy_encoder_kernel_1.cpp.o
[ 10%] Building CXX object dlib_build/CMakeFiles/dlib.dir/entropy_encoder/entropy_encoder_kernel_2.cpp.o
[ 11%] Building CXX object dlib_build/CMakeFiles/dlib.dir/md5/md5_kernel_1.cpp.o
[ 12%] Building CXX object dlib_build/CMakeFiles/dlib.dir/tokenizer/tokenizer_kernel_1.cpp.o
[ 14%] Building CXX object dlib_build/CMakeFiles/dlib.dir/unicode/unicode.cpp.o
[ 15%] Building CXX object dlib_build/CMakeFiles/dlib.dir/data_io/image_dataset_metadata.cpp.o
[ 16%] Building CXX object dlib_build/CMakeFiles/dlib.dir/data_io/mnist.cpp.o
[ 17%] Building CXX object dlib_build/CMakeFiles/dlib.dir/global_optimization/global_function_search.cpp.o
[ 19%] Building CXX object dlib_build/CMakeFiles/dlib.dir/sockets/sockets_kernel_1.cpp.o
[ 20%] Building CXX object dlib_build/CMakeFiles/dlib.dir/bsp/bsp.cpp.o
[ 21%] Building CXX object dlib_build/CMakeFiles/dlib.dir/dir_nav/dir_nav_kernel_1.cpp.o
[ 23%] Building CXX object dlib_build/CMakeFiles/dlib.dir/dir_nav/dir_nav_kernel_2.cpp.o
[ 24%] Building CXX object dlib_build/CMakeFiles/dlib.dir/dir_nav/dir_nav_extensions.cpp.o
[ 25%] Building CXX object dlib_build/CMakeFiles/dlib.dir/linker/linker_kernel_1.cpp.o
[ 26%] Building CXX object dlib_build/CMakeFiles/dlib.dir/logger/extra_logger_headers.cpp.o
[ 28%] Building CXX object dlib_build/CMakeFiles/dlib.dir/logger/logger_kernel_1.cpp.o
[ 29%] Building CXX object dlib_build/CMakeFiles/dlib.dir/logger/logger_config_file.cpp.o
[ 30%] Building CXX object dlib_build/CMakeFiles/dlib.dir/misc_api/misc_api_kernel_1.cpp.o
[ 32%] Building CXX object dlib_build/CMakeFiles/dlib.dir/misc_api/misc_api_kernel_2.cpp.o
[ 33%] Building CXX object dlib_build/CMakeFiles/dlib.dir/sockets/sockets_extensions.cpp.o
[ 34%] Building CXX object dlib_build/CMakeFiles/dlib.dir/sockets/sockets_kernel_2.cpp.o
[ 35%] Building CXX object dlib_build/CMakeFiles/dlib.dir/sockstreambuf/sockstreambuf.cpp.o
[ 37%] Building CXX object dlib_build/CMakeFiles/dlib.dir/sockstreambuf/sockstreambuf_unbuffered.cpp.o
[ 38%] Building CXX object dlib_build/CMakeFiles/dlib.dir/server/server_kernel.cpp.o
[ 39%] Building CXX object dlib_build/CMakeFiles/dlib.dir/server/server_iostream.cpp.o
[ 41%] Building CXX object dlib_build/CMakeFiles/dlib.dir/server/server_http.cpp.o
[ 42%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/multithreaded_object_extension.cpp.o
[ 43%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/threaded_object_extension.cpp.o
[ 44%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/threads_kernel_1.cpp.o
[ 46%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/threads_kernel_2.cpp.o
[ 47%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/threads_kernel_shared.cpp.o
[ 48%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/thread_pool_extension.cpp.o
[ 50%] Building CXX object dlib_build/CMakeFiles/dlib.dir/threads/async.cpp.o
[ 51%] Building CXX object dlib_build/CMakeFiles/dlib.dir/timer/timer.cpp.o
[ 52%] Building CXX object dlib_build/CMakeFiles/dlib.dir/stack_trace.cpp.o
[ 53%] Building CXX object dlib_build/CMakeFiles/dlib.dir/dnn/cpu_dlib.cpp.o
[ 55%] Building CXX object dlib_build/CMakeFiles/dlib.dir/dnn/tensor_tools.cpp.o
[ 56%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_widgets/fonts.cpp.o
[ 57%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_widgets/widgets.cpp.o
[ 58%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_widgets/drawable.cpp.o
[ 60%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_widgets/canvas_drawing.cpp.o
[ 61%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_widgets/style.cpp.o
[ 62%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_widgets/base_widgets.cpp.o
[ 64%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_core/gui_core_kernel_1.cpp.o
[ 65%] Building CXX object dlib_build/CMakeFiles/dlib.dir/gui_core/gui_core_kernel_2.cpp.o
[ 66%] Building CXX object dlib_build/CMakeFiles/dlib.dir/image_loader/png_loader.cpp.o
[ 67%] Building CXX object dlib_build/CMakeFiles/dlib.dir/image_saver/save_png.cpp.o
[ 69%] Building CXX object dlib_build/CMakeFiles/dlib.dir/image_loader/jpeg_loader.cpp.o
[ 70%] Building CXX object dlib_build/CMakeFiles/dlib.dir/image_saver/save_jpeg.cpp.o
[ 71%] Linking CXX static library libdlib.a
[ 71%] Built target dlib
Scanning dependencies of target dlib_python
[ 73%] Building CXX object CMakeFiles/dlib_python.dir/src/dlib.cpp.o
[ 74%] Building CXX object CMakeFiles/dlib_python.dir/src/matrix.cpp.o
[ 75%] Building CXX object CMakeFiles/dlib_python.dir/src/vector.cpp.o
[ 76%] Building CXX object CMakeFiles/dlib_python.dir/src/svm_c_trainer.cpp.o
[ 78%] Building CXX object CMakeFiles/dlib_python.dir/src/svm_rank_trainer.cpp.o
[ 79%] Building CXX object CMakeFiles/dlib_python.dir/src/decision_functions.cpp.o
[ 80%] Building CXX object CMakeFiles/dlib_python.dir/src/other.cpp.o
[ 82%] Building CXX object CMakeFiles/dlib_python.dir/src/basic.cpp.o
[ 83%] Building CXX object CMakeFiles/dlib_python.dir/src/cca.cpp.o
[ 84%] Building CXX object CMakeFiles/dlib_python.dir/src/sequence_segmenter.cpp.o
[ 85%] Building CXX object CMakeFiles/dlib_python.dir/src/svm_struct.cpp.o
[ 87%] Building CXX object CMakeFiles/dlib_python.dir/src/image.cpp.o
[ 88%] Building CXX object CMakeFiles/dlib_python.dir/src/rectangles.cpp.o
[ 89%] Building CXX object CMakeFiles/dlib_python.dir/src/object_detection.cpp.o
[ 91%] Building CXX object CMakeFiles/dlib_python.dir/src/shape_predictor.cpp.o
[ 92%] Building CXX object CMakeFiles/dlib_python.dir/src/correlation_tracker.cpp.o
[ 93%] Building CXX object CMakeFiles/dlib_python.dir/src/face_recognition.cpp.o
c++: internal compiler error: Killed (program cc1plus)
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-5/README.Bugs> for instructions.
CMakeFiles/dlib_python.dir/build.make:446: recipe for target 'CMakeFiles/dlib_python.dir/src/face_recognition.cpp.o' failed
make[2]: *** [CMakeFiles/dlib_python.dir/src/face_recognition.cpp.o] Error 4
CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/dlib_python.dir/all' failed
make[1]: *** [CMakeFiles/dlib_python.dir/all] Error 2
Makefile:83: recipe for target 'all' failed
make: *** [all] Error 2
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-build-61bjkblz/dlib/setup.py", line 238, in <module>
'Topic :: Software Development',
File "/usr/lib/python3.5/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.5/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
return orig.install.run(self)
File "/usr/lib/python3.5/distutils/command/install.py", line 583, in run
self.run_command('build')
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3.5/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.5/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.5/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/tmp/pip-build-61bjkblz/dlib/setup.py", line 119, in run
self.build_extension(ext)
File "/tmp/pip-build-61bjkblz/dlib/setup.py", line 155, in build_extension
subprocess.check_call(cmake_build, cwd=build_folder)
File "/usr/lib/python3.5/subprocess.py", line 581, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '--build', '.', '--config', 'Release', '--', '-j1']' returned non-zero exit status 2
----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-61bjkblz/dlib/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-q0ealcj_-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-61bjkblz/dlib/
`
Still can't install requirements.txt without errors
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
It seems that dlib has some dependencies...install those like this.
$ sudo apt-get install build-essential cmake
$ sudo apt-get install libgtk-3-dev
$ sudo apt-get install libboost-all-dev
Which Ubuntu version are you using?
I tried it with a xubuntu 16.04 live boot and the current Readme worked. But try those last steps. If those work then I will add them to the Readme
from eagleeye.
20chix
commented on August 30, 2024
I have 16.04 ubuntu on virtualbox:
I will download a fresh version of ubuntu and try again but still getting errors.
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-zdwj9i04/dlib/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-17ngb9fa-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-zdwj9i04/dlib/
``
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
That's weird...
On the clean vm try installing python 3
sudo apt install python3 python3-pip python3-dev
Then
$ sudo apt-get install build-essential cmake
$ sudo apt-get install libgtk-3-dev
$ sudo apt-get install libboost-all-dev
And then follow the Readme. That's what I did on Ubuntu 16.04
Make sure that you use pip3
I will try to replicate your issue tomorrow
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
I did the follow on a fresh 16.04 Ubuntu Install:
$ sudo apt install python3 python3-pip python3-dev
$ sudo apt install libgtk-3-dev libboost-all-dev build-essential cmake libffi-dev
$ git clone https://github.com/ThoughtfulDev/EagleEye
$ cd EagleEye && pip3 install -r requirements.txt
$ sudo pip3 install --upgrade beautifulsoup4 html5lib spry
from eagleeye.
20chix
commented on August 30, 2024
Installing fresh version of ubuntu, will keep you update.
PS you should defenetly expand this project, few suggestions:
- Place this project into a server, where a web application or iOS or Android app can use it as you would in a Linux environment
- Capture faces from a smart phone camera , send it to the server run the software and return to the user with results
- Improve the algorithm in order to just pass an image, and return with suggestions of the person deatils
If you want I can help with 1) 2) and 3).
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
- and 2. Thats actually not that hard but i first want to focus on the program itself.
- This actually works as of right now. You can pass the --skipfb flag to skip the Facebook Search so you wont need a name e.g
python3 eagle-eye.py --skipfb
And ofcourse Pull Requests are welcome ;)
from eagleeye.
20chix
commented on August 30, 2024
Fresh version of ubuntu 16.04 LTS, still getting stuck into this bit
----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-dm89bazw
/dlib/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__,
'exec'))" install --record /tmp/pip-6uwrkwyu-record/install-record.txt --single-version-externally-managed
--compile" failed with error code 1 in /tmp/pip-build-dm89bazw/dlib/
``
from eagleeye.
20chix
commented on August 30, 2024
Will try to run this commandpip3 install -r requirements.txt with sudo
from eagleeye.
20chix
commented on August 30, 2024
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-_sxch134/dlib/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-z5_521d0-record/install-record.txt --single-version-externally-managed --compile --user --prefix=" failed with error code 1 in /tmp/pip-build-_sxch134/dlib/
You are using pip version 8.1.1, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' comma
Still getting the same error, dont know what else to try
from eagleeye.
20chix
commented on August 30, 2024
Trying Automated Prequisites Installation from your readme
from eagleeye.
20chix
commented on August 30, 2024
Still getting same errors with automated
from eagleeye.
ThoughtfulDev
commented on August 30, 2024
I have no Idea why i works on my Iso and not on yours ...
try those last steps:
$ sudo apt-get update
$ sudo apt-get install build-essential cmake
$ sudo apt-get install libopenblas-dev liblapack-dev
$ sudo apt-get install libx11-dev libgtk-3-dev
$ sudo apt-get install python python-dev python-pip
$ sudo apt-get install python3 python3-dev python3-pip
then run the automated install script.
from eagleeye.
Martmists-GH
commented on August 30, 2024
@20chix please post the full error; we can't do anything with the python command, we need the C logs
from eagleeye.
Related Issues (20)
- Gets stuck on Validating Instagram profiles
- docker build returns an error HOT 4
- I need help running the software HOT 1
- Dependecies dont work
- help HOT 1
- executor failed running [/bin/sh -c apt-get update && add-apt-repository -y ppa:deadsnakes/ppa && apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y python3.6 python3.6-dev] HOT 2
- AttributeError: 'WebDriver' object has no attribute 'find_elements_by_xpath' HOT 1
- webdriver_prefs.json cant be found LINUX Aarch64
- Ubuntu Google error HOT 1
- Unable to run this with or without docker
- Geckodriver issue HOT 2
- Docker Troubles HOT 3
- No module name "utils.console" HOT 1
- AttributeError: 'FirefoxProfile' Object has no attribute '_ignore_local_proxy' HOT 1
- cannot build docker HOT 2
- AttributeError: 'FirefoxProfile' object has no attribute 'capabilities' HOT 5
- Online RP
- NEED HELP!
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from eagleeye.