How to write library to sduino about sduino HOT 3 CLOSED

void LiquidCrystal_init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
	    uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
	    uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);

#ifndef __TM1637DISPLAY__
#define __TM1637DISPLAY__
#include <xmacro.h>
//#include <inttypes.h>

#define SEG_A   0b00000001
#define SEG_B   0b00000010
#define SEG_C   0b00000100
#define SEG_D   0b00001000
#define SEG_E   0b00010000
#define SEG_F   0b00100000
#define SEG_G   0b01000000


#ifdef __cplusplus

// C++ interface for use with regular gcc compiler

#else
void TM1637Display(uint8_t pinClk, uint8_t pinDIO);

#endif


#endif // __TM1637DISPLAY__

#include <TM1637Display.h>
#include <Arduino.h>

#define TM1637_I2C_COMM1    0x40
#define TM1637_I2C_COMM2    0xC0
#define TM1637_I2C_COMM3    0x80


void TM1637Display(uint8_t pinClk, uint8_t pinDIO)
{
	// Copy the pin numbers
	m_pinClk = pinClk;
	m_pinDIO = pinDIO;

	// Set the pin direction and default value.
	// Both pins are set as inputs, allowing the pull-up resistors to pull them up
    pinMode(m_pinClk, INPUT);
    pinMode(m_pinDIO,INPUT);
	digitalWrite(m_pinClk, LOW);
	digitalWrite(m_pinDIO, LOW);
}