TG2-AMENDMENT_COORDINATES_TRANSPOSED about bdq HOT 8 OPEN

This one still has problems. I would replace the current Expected Response

"INTERNAL_PREREQUISITES_NOT_MET if dwc:decimalLatitude and dwc:decimalLongitude are EMPTY or the values of dwc:decimalLatitude and dwc:decimalLongitude passed to the dwc:countryCode specified source authority service were not in the same spatial reference system as that of the service; AMENDED if the supplied geographic coordinates were transposed or one or more of the signs were reversed (negated) to place the record in the region defined by the supplied dwc:countryCode; otherwise NOT_CHANGED"

with

"INTERNAL_PREREQUISITES_NOT_MET if any of dwc:decimalLatitude or dwc:decimalLongitude or dwc:countryCode is EMPTY; AMENDED if the supplied geographic coordinates were transposed or one or more of the signs were reversed (negated) to place the record in the region defined by the supplied dwc:countryCode; otherwise NOT_CHANGED"

For the Notes, I would add

"The dwc:geodeticDatum is not necessary for this test. The maximum positional shift between any geographic coordinate reference system and WGS84 is less than 6 km, so any hemisphere test that relies on a country code for consistency would not be affected by the potential shift."

from bdq.

Comment by Paula Zermoglio (@pzermoglio) migrated from spreadsheet:
Should this be two separate tests?

from bdq.

Comment by Paul Morris (@chicoreus) migrated from spreadsheet:
Corresponding validation is COUNTRY_COORDINATE_MISMATCH (VALIDATION_COORDINATE_COUNTRY_INCONSISTENT)

from bdq.

We have a quorum, so edited accordingly, with one change "is" to "are".

from bdq.

Updated Note #50 to VALIDATION_COORDINATE_COUNTRYCODE_CONSISTENT (adb27d29-9f0d-4d52-b760-a77ba57a69c9)

from bdq.

Splitting bdqffdq:Information Elements into "Information Elements ActedUpon" and "Information Elements Consulted". Also changed "Field" to "TestField" and "Output Type" to "TestType".

from bdq.

Needs a sourceAuthority for spatial data to go with the countryCodes.

from bdq.

Source Authority added: bdq:sourceAuthority default = "ISO 3166 Country Codes" {[https://www.iso.org/iso-3166-country-codes.html]} {ISO 3166-1-alpha-2 Country Code search [https://www.iso.org/obp/ui/#search]}

from bdq.