Add Yeelight Rotating Dimmer (YLKG07YL, YLKG08YL) support about esphome-yeelight-ceiling-light HOT 6 OPEN

do you have plan to resolve the ble reboot issue?

from esphome-yeelight-ceiling-light.

I've replaced the single core ESP32 of one of my lamps with a dual core ESP32. At dual core ESP32 the ble_monitor is stable. As soon BLE and WiFi runs on the same core the application crashs. I don't know how to fix it. It's above my skills. ;-)

from esphome-yeelight-ceiling-light.

Oh there is some progress missing here. I've extended the ble_monitor of ESPHome to support the remote controls. You can find an example configuration here: https://github.com/syssi/esphome-yeelight-ceiling-light/blob/main/yeerc_ylyk01yl.yaml

The problem: If you enable the BLE stack on an single core ESP32 (used in all Yeelight devices) the application crashs on boot-up. To be able to listen to some BLE traffic you have to replace the ESP32 with a dual core version.

from esphome-yeelight-ceiling-light.

Thank you, as I see the config, that not direct control the light, its send it to home assistant, than i guess the rule from HA control the esp. Am I right?

from esphome-yeelight-ceiling-light.

As I see, the only chance to turn off and on the wifi and ble :-)
espressif/arduino-esp32#1756
So I think, this is the dead end :'(

from esphome-yeelight-ceiling-light.

The Yaml is just an example. You could wire/cosume the events also in ESPHome directly.

from esphome-yeelight-ceiling-light.