[Kicad] Missing Libraries like: EL3H7-G.lib about diybmsv4 HOT 7 CLOSED

Which version of kicad did you install?

from diybmsv4.

I have installed Kicad 5.1.14

from diybmsv4.

I had a missing Libraries issues with an older version of Kicad too. I installed 5.1.4 and it worked fine.

from diybmsv4.

I had a missing Libraries issues with an older version of Kicad too. I installed 5.1.4 and it worked fine.

I probably need some default libray, that so far is not loaded. (Or at least I think)
I'm recreating the project on Altium so I can use a CAD that I know, but I would have preferred to use Kicad if the project was loading correctly.

from diybmsv4.

Go to Preferences -> Manage Symbol Libraries -> Project Specific Libraries
Delete si8631ab-b-is1 and EL3H7-G these parts are not needed anymore.
The EL3H7-G has probably been replaced by the HMHA2801.
The ESPCircuit needs the Wemos D1 Mini from https://github.com/rubienr/wemos-d1-mini-kicad
to be completed. However it is not need either.

from diybmsv4.

Go to Preferences -> Manage Symbol Libraries -> Project Specific Libraries
Delete si8631ab-b-is1 and EL3H7-G these parts are not needed anymore.
The EL3H7-G has probably been replaced by the HMHA2801.
The ESPCircuit needs the Wemos D1 Mini from https://github.com/rubienr/wemos-d1-mini-kicad
to be completed. However it is not need either.

Done but the schematic still have a lot of '???' instead of the symbols. Resistors, caps, all all marked with ?

from diybmsv4.

Looks like I had a corrupted installation of KiCad!

from diybmsv4.