Comments (15)
striczkof
commented on June 20, 2024
1
Never used a tiling DE before, give me a bit lol
But this installer works on my GNOME and KDE Wayland DEs so wayland part should be irrelevant
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
Can you check what's on systemctl status v4l2-relayd?
from archlinux-ipu6-webcam.
naps62
commented on June 20, 2024
v4l2-relayd.service - v4l2-relay daemon service
Loaded: loaded (/usr/lib/systemd/system/v4l2-relayd.service; enabled; preset: disabled)
Drop-In: /etc/systemd/system/v4l2-relayd.service.d
└─override.conf
Active: active (running) since Fri 2023-06-30 09:32:54 WEST; 1h 44min ago
Process: 591 ExecCondition=/usr/bin/test -n ${VIDEOSRC} (code=exited, status=0/SUCCESS)
Process: 630 ExecCondition=/usr/bin/test -n $FORMAT (code=exited, status=0/SUCCESS)
Process: 633 ExecCondition=/usr/bin/test -n $WIDTH (code=exited, status=0/SUCCESS)
Process: 635 ExecCondition=/usr/bin/test -n $HEIGHT (code=exited, status=0/SUCCESS)
Process: 641 ExecCondition=/usr/bin/test -n $FRAMERATE (code=exited, status=0/SUCCESS)
Process: 643 ExecCondition=/usr/bin/test -n ${CARD_LABEL} (code=exited, status=0/SUCCESS)
Main PID: 645 (v4l2-relayd)
Tasks: 3 (limit: 38015)
Memory: 12.1M
CPU: 46ms
CGroup: /system.slice/v4l2-relayd.service
└─645 /usr/bin/v4l2-relayd -i icamerasrc -o "appsrc name=appsrc caps=video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! videoconvert ! video/x-raw,format=YUY2 ! v4l2sink name=v4l2sink device=/dev/video0
jun 30 09:32:53 arrakis systemd[1]: Starting v4l2-relay daemon service...
jun 30 09:32:54 arrakis systemd[1]: Started v4l2-relay daemon service.
jun 30 09:32:54 arrakis v4l2-relayd[645]: gst_element_set_state: assertion 'GST_IS_ELEMENT (element)' failed
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
That's literally the same error I get when I first ran the script but didn't restart. I'd say restart your PC but I assume you've done that already lol
Give me a day or two so I can install Manjaro to my XPS 13 Plus and see what's what
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
@naps62 Out of topic: how did you install Manjaro to your laptop? I used dd to copy Manjaro ISO to my flash drive as directed by Manjaro Wiki but it's not showing up on my UEFI boot options :/
from archlinux-ipu6-webcam.
naps62
commented on June 20, 2024
@striczkof i used to have similar issues. Nowadays I have a usb stick with Ventoy installed (https://www.ventoy.net/en/index.html)
It makes it so you can just copy iso files into it, and it handles all the boot complexities (and gives you a menu, so you can keep multiple distros ready to boot)
And yes, I did restart :)
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
@naps62 so ye I just gave up and used ventoy because idk why ISO won't work with cp nor dd.
Funny thing now though, my webcam is working after installing and restarting, no tinkering done other than install git and linux61-header (using linux61 since it came with manjaro fresh install) so now I am totally clueless what happened to both @hinricht 's (#21 ) and your setup.
GIve me a bit and I will try with Linux 6.3.
Edit: works on 6.3.5-2-MANJARO too so yeah...
I'm wondering, are you using 12th gen or 13th gen XPS 13 Plus? Highly doubt that should matter but dunno
My environment:
- Laptop:
XPS 13 Plus 9320 with i7-1260P - OS:
Manjaro 22.1.1 - Desktop Environment:
Xfce 4.18 - Kernel:
6.1.31-2-MANJARO - Kernel packages:
linux61linux61-headers
Working on Firefox and Discord after restart
Apologies for the German outputs. I forgor again 💀
Logs:
install.sh
Warnung: linux61-headers-6.1.31-2 ist aktuell -- Überspringe
Es gibt nichts zu tun
# Install dependency for intel-ipu6-dkms-git
:: Löse Abhängigkeiten auf…
:: Berechne Konflikte…
:: Berechne interne Konflikte…
Aur (1) intel-ivsc-firmware-r2.764bd6e-1
:: Weiter überprüfen? [J/n]:
:: Lade PKGBUILDs herunter…
(1/1) Lädt herunter: intel-ivsc-firmware-r2.764bd6e-1
frage devel info ab…
==> Erstelle Paket: intel-ivsc-firmware r2.764bd6e-1 (Sat 01 Jul 2023 20:49:09)
==> Empfange Quellen...
-> Klone das ivsc-firmware git Repo...
Klone in Bare-Repository '/home/striczkof/.cache/paru/clone/intel-ivsc-firmware/ivsc-firmware' ...
==> Überprüfe source Dateien mit sha256sums...
ivsc-firmware ... Übersprungen
==> Erstelle Paket: intel-ivsc-firmware r2.764bd6e-1 (Sat 01 Jul 2023 20:49:11)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> Empfange Quellen...
-> Aktualisiere das ivsc-firmware git Repo...
==> Überprüfe source Dateien mit sha256sums...
ivsc-firmware ... Übersprungen
==> Entferne existierendes $srcdir/ Verzeichnis...
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des ivsc-firmware git Repos...
Klone nach 'ivsc-firmware'...
Fertig.
==> Beginne pkgver()...
==> Aktualisierte Version: intel-ivsc-firmware r8.29c5eff-1
==> Quellen sind fertig.
intel-ivsc-firmware-r2.764bd6e-1: Parse pkg Liste…
==> Erstelle Paket: intel-ivsc-firmware r8.29c5eff-1 (Sat 01 Jul 2023 20:49:12)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> WARNUNG: Verwende bestehenden $srcdir/ Baum
==> Beginne pkgver()...
==> Betrete fakeroot Umgebung...
==> Beginne package()...
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "intel-ivsc-firmware"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: intel-ivsc-firmware r8.29c5eff-1 (Sat 01 Jul 2023 20:49:13)
==> Räume auf...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) intel-ivsc-firmware-r8.29c5eff-1
Gesamtgröße der installierten Pakete: 9.45 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
intel-ivsc-firmware wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/1) Arming ConditionNeedsUpdate...
=> SUCCESS
# Build and install package: intel-ipu6-dkms-git
~/Dokumente/archlinux-ipu6-webcam/intel-ipu6-dkms-git ~/Dokumente/archlinux-ipu6-webcam
==> Erstelle Paket: intel-ipu6-dkms-git-fix r100.8c02a846d-1 (Sat 01 Jul 2023 20:49:14)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Installiere fehlende Abhängigkeiten...
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) dkms-3.0.11-1
Gesamtgröße des Downloads: 0.04 MiB
Gesamtgröße der installierten Pakete: 0.11 MiB
:: Installation fortsetzen? [J/n]
:: Pakete werden empfangen …
dkms-3.0.11-1-any wird heruntergeladen …
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
dkms wird installiert …
Optionale Abhängigkeiten für dkms
linux-headers: build modules against the Arch kernel [Installiert]
linux-lts-headers: build modules against the LTS kernel
linux-zen-headers: build modules against the ZEN kernel
linux-hardened-headers: build modules against the HARDENED kernel
:: Post-transaction-Hooks werden gestartet …
(1/1) Arming ConditionNeedsUpdate...
==> Prüfe Buildtime-Abhängigkeiten...
==> Empfange Quellen...
-> Klone das ipu6-drivers git Repo...
Klone in Bare-Repository '/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6-dkms-git/ipu6-drivers' ...
==> Überprüfe source Dateien mit sha256sums...
ipu6-drivers ... Übersprungen
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des ipu6-drivers git Repos...
Klone nach 'ipu6-drivers'...
Fertig.
Zu neuem Branch 'makepkg' gewechselt
==> Beginne prepare()...
Klone nach 'ivsc-driver'...
==> Beginne pkgver()...
==> Betrete fakeroot Umgebung...
==> Beginne package()...
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "intel-ipu6-dkms-git-fix"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: intel-ipu6-dkms-git-fix r100.8c02a846d-1 (Sat 01 Jul 2023 20:49:55)
==> Installiere Paket intel-ipu6-dkms-git-fix mit pacman -U...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) intel-ipu6-dkms-git-fix-r100.8c02a846d-1
Gesamtgröße der installierten Pakete: 1.46 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
intel-ipu6-dkms-git-fix wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/2) Arming ConditionNeedsUpdate...
(2/2) Install DKMS modules
==> dkms install --no-depmod ipu6-drivers/r100.8c02a846d -k 6.1.31-2-MANJARO
==> depmod 6.1.31-2-MANJARO
~/Dokumente/archlinux-ipu6-webcam
=> SUCCESS
# Install dependency for intel-ipu6ep-camera-hal-git
:: Löse Abhängigkeiten auf…
:: Berechne Konflikte…
:: Berechne interne Konflikte…
Aur (1) ipu6-camera-bin-r32.0797f74-1 (intel-ipu6ep-camera-bin)
:: Weiter überprüfen? [J/n]:
:: Lade PKGBUILDs herunter…
(1/1) Lädt herunter: ipu6-camera-bin-r32.0797f74-1 (intel-ipu6ep-camera-bin)
frage devel info ab…
==> Erstelle Paket: ipu6-camera-bin r32.0797f74-1 (Sat 01 Jul 2023 20:50:10)
==> Empfange Quellen...
-> Klone das ipu6-camera-bins git Repo...
Klone in Bare-Repository '/home/striczkof/.cache/paru/clone/ipu6-camera-bin/ipu6-camera-bins' ...
==> Überprüfe source Dateien mit sha256sums...
ipu6-camera-bins ... Übersprungen
==> Erstelle Paket: ipu6-camera-bin r32.0797f74-1 (Sat 01 Jul 2023 20:51:03)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> Empfange Quellen...
-> Aktualisiere das ipu6-camera-bins git Repo...
==> Überprüfe source Dateien mit sha256sums...
ipu6-camera-bins ... Übersprungen
==> Entferne existierendes $srcdir/ Verzeichnis...
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des ipu6-camera-bins git Repos...
Klone nach 'ipu6-camera-bins'...
Fertig.
==> Beginne pkgver()...
==> Aktualisierte Version: ipu6-camera-bin r44.276859f-1
==> Quellen sind fertig.
ipu6-camera-bin-r32.0797f74-1 (intel-ipu6ep-camera-bin): Parse pkg Liste…
==> Erstelle Paket: ipu6-camera-bin r44.276859f-1 (Sat 01 Jul 2023 20:51:06)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> WARNUNG: Verwende bestehenden $srcdir/ Baum
==> Beginne pkgver()...
==> Betrete fakeroot Umgebung...
==> Beginne package_intel-ipu6-camera-bin()...
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "intel-ipu6-camera-bin"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Beginne package_intel-ipu6ep-camera-bin()...
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "intel-ipu6ep-camera-bin"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: ipu6-camera-bin r44.276859f-1 (Sat 01 Jul 2023 20:51:09)
==> Räume auf...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) intel-ipu6ep-camera-bin-r44.276859f-1
Gesamtgröße der installierten Pakete: 13.39 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
intel-ipu6ep-camera-bin wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/1) Arming ConditionNeedsUpdate...
=> SUCCESS
# Build and install package: intel-ipu6ep-camera-hal-git
~/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git ~/Dokumente/archlinux-ipu6-webcam
==> Erstelle Paket: intel-ipu6ep-camera-hal-git-fix r56.884b81a-1 (Sat 01 Jul 2023 20:51:10)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> Installiere fehlende Abhängigkeiten...
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (4) jsoncpp-1.9.5-2 libuv-1.44.2-1 rhash-1.4.3-1 cmake-3.26.4-1
Gesamtgröße des Downloads: 11.06 MiB
Gesamtgröße der installierten Pakete: 68.29 MiB
:: Installation fortsetzen? [J/n]
:: Pakete werden empfangen …
cmake-3.26.4-1-x86_64 wird heruntergeladen …
libuv-1.44.2-1-x86_64 wird heruntergeladen …
rhash-1.4.3-1-x86_64 wird heruntergeladen …
jsoncpp-1.9.5-2-x86_64 wird heruntergeladen …
Fehler: Konnte Datei 'cmake-3.26.4-1-x86_64.pkg.tar.zst' nicht von ftp.riken.jp übertragen : Failed to connect to ftp.riken.jp port 80 after 10001 ms: Timeout was reached
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
jsoncpp wird installiert …
Optionale Abhängigkeiten für jsoncpp
jsoncpp-doc: documentation
libuv wird installiert …
rhash wird installiert …
cmake wird installiert …
Optionale Abhängigkeiten für cmake
qt6-base: cmake-gui [Installiert]
:: Post-transaction-Hooks werden gestartet …
(1/4) Arming ConditionNeedsUpdate...
(2/4) Updating the MIME type database...
(3/4) Updating icon theme caches...
(4/4) Updating the desktop file MIME type cache...
==> Empfange Quellen...
-> Klone das ipu6-camera-hal git Repo...
Klone in Bare-Repository '/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/ipu6-camera-hal' ...
==> Überprüfe source Dateien mit sha256sums...
ipu6-camera-hal ... Übersprungen
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des ipu6-camera-hal git Repos...
Klone nach 'ipu6-camera-hal'...
Fertig.
==> Beginne pkgver()...
==> Beginne build()...
CMake Deprecation Warning at CMakeLists.txt:17 (cmake_minimum_required):
Compatibility with CMake < 2.8.12 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
-- The C compiler identification is GNU 13.1.1
-- The CXX compiler identification is GNU 13.1.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- install prefix: /usr
-- Performing Test COMPILER_SUPPORTS_ALIGNED_NEW
-- Performing Test COMPILER_SUPPORTS_ALIGNED_NEW - Success
INFOadd definition -DIPU_SYSVER_ipu6v5 for ipu6ep
-- Performing Test COMPILER_SUPPORTS_NO_UNUSED_BUT_SET_VAR
-- Performing Test COMPILER_SUPPORTS_NO_UNUSED_BUT_SET_VAR - Success
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "1.8.1")
-- Checking for module 'ia_imaging'
-- Found ia_imaging, version VERSION
-- Found IA_IMAGING: /usr/include/ia_imaging
-- Checking for module 'libgcss'
-- Found libgcss, version
-- Found LIBGCSS: /usr/include/ia_camera
-- Checking for module 'libipu6ep'
-- Found libipu6ep, version VERSION
-- Found LIBIPU: /usr/include/libipu
Install ADL IPU6EP configure files
-- Configuring done (0.5s)
-- Generating done (0.0s)
CMake Warning:
Manually-specified variables were not used by the project:
ENABLE_VIRTUAL_IPU_PIPE
USE_STATIC_GRAPH
-- Build files have been written to: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/build
[ 1%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_terminal.c.o
[ 2%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_program_group_manifest.c.o
[ 3%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_process_group.c.o
In Datei, eingebunden von /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/src/ia_css_psys_process_group.c:27:
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h: In Funktion »ia_css_process_group_print«:
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h:535:18: Warnung: Variable »routing_bitmap« gesetzt, aber nicht verwendet [-Wunused-but-set-variable]
535 | ia_css_rbm_t routing_bitmap;
| ^~~~~~~~~~~~~~
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h: In Funktion »ia_css_can_process_group_submit«:
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h:703:25: Warnung: Variable »buffer« gesetzt, aber nicht verwendet [-Wunused-but-set-variable]
703 | vied_vaddress_t buffer;
| ^~~~~~
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h:691:9: Warnung: Variable »retval« gesetzt, aber nicht verwendet [-Wunused-but-set-variable]
691 | int retval = -1;
| ^~~~~~
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h: In Funktion »ia_css_can_enqueue_buffer_set«:
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h:797:25: Warnung: Variable »buffer« gesetzt, aber nicht verwendet [-Wunused-but-set-variable]
797 | vied_vaddress_t buffer;
| ^~~~~~
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h:774:9: Warnung: Variable »retval« gesetzt, aber nicht verwendet [-Wunused-but-set-variable]
774 | int retval = -1;
| ^~~~~~
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h: In Funktion »ia_css_can_process_group_start«:
/home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/src/ipu6-camera-hal/modules/ia_css/ipu6ep/include/ia_css_psys_process_group_impl.h:856:9: Warnung: Variable »retval« gesetzt, aber nicht verwendet [-Wunused-but-set-variable]
856 | int retval = -1;
| ^~~~~~
[ 4%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_rbm.c.o
[ 5%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_program_group_data.c.o
[ 6%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_process_group_cmd_impl.c.o
[ 7%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_process.c.o
[ 8%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/vied_nci_psys_system.c.o
[ 9%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_terminal.c.o
[ 10%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_program_group_param.c.o
[ 11%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_terminal_manifest.c.o
[ 12%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_program_manifest.c.o
[ 13%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_psys_terminal_manifest.c.o
[ 14%] Building C object CMakeFiles/camhal_static.dir/modules/ia_css/ipu6ep/src/ia_css_kernel_bitmap.c.o
[ 15%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/I3AControlFactory.cpp.o
[ 16%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqUtils.cpp.o
[ 17%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/intel3a/Intel3AParameter.cpp.o
[ 18%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqResult.cpp.o
[ 19%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqResultStorage.cpp.o
[ 20%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/SensorManager.cpp.o
[ 21%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/LensManager.cpp.o
[ 22%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqCore.cpp.o
[ 23%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqEngine.cpp.o
[ 24%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqSetting.cpp.o
[ 25%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/AiqUnit.cpp.o
[ 26%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/MakerNote.cpp.o
[ 27%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/Dvs.cpp.o
[ 28%] Building CXX object CMakeFiles/camhal_static.dir/src/3a/Ltm.cpp.o
[ 29%] Building CXX object CMakeFiles/camhal_static.dir/src/core/CaptureUnit.cpp.o
[ 30%] Building CXX object CMakeFiles/camhal_static.dir/src/core/DeviceBase.cpp.o
[ 31%] Building CXX object CMakeFiles/camhal_static.dir/src/core/CameraStream.cpp.o
[ 32%] Building CXX object CMakeFiles/camhal_static.dir/src/core/CameraDevice.cpp.o
[ 34%] Building CXX object CMakeFiles/camhal_static.dir/src/core/ProcessorManager.cpp.o
[ 35%] Building CXX object CMakeFiles/camhal_static.dir/src/core/RequestThread.cpp.o
[ 36%] Building CXX object CMakeFiles/camhal_static.dir/src/core/SwImageProcessor.cpp.o
[ 37%] Building CXX object CMakeFiles/camhal_static.dir/src/core/BufferQueue.cpp.o
[ 38%] Building CXX object CMakeFiles/camhal_static.dir/src/core/CameraBuffer.cpp.o
[ 40%] Building CXX object CMakeFiles/camhal_static.dir/src/core/CameraEvent.cpp.o
[ 40%] Building CXX object CMakeFiles/camhal_static.dir/src/core/LensHw.cpp.o
[ 41%] Building CXX object CMakeFiles/camhal_static.dir/src/core/SensorHwCtrl.cpp.o
[ 42%] Building CXX object CMakeFiles/camhal_static.dir/src/core/SofSource.cpp.o
[ 43%] Building CXX object CMakeFiles/camhal_static.dir/src/core/SyncManager.cpp.o
[ 44%] Building CXX object CMakeFiles/camhal_static.dir/src/core/psysprocessor/PolicyManager.cpp.o
[ 45%] Building CXX object CMakeFiles/camhal_static.dir/src/core/CvfPrivacyChecker.cpp.o
[ 46%] Building CXX object CMakeFiles/camhal_static.dir/src/core/PSysProcessor.cpp.o
[ 47%] Building CXX object CMakeFiles/camhal_static.dir/src/core/IspParamAdaptor.cpp.o
[ 48%] Building CXX object CMakeFiles/camhal_static.dir/src/core/psysprocessor/PSysDAG.cpp.o
[ 49%] Building CXX object CMakeFiles/camhal_static.dir/src/core/psysprocessor/PipeLiteExecutor.cpp.o
[ 50%] Building CXX object CMakeFiles/camhal_static.dir/src/core/psysprocessor/PGCommon.cpp.o
[ 51%] Building CXX object CMakeFiles/camhal_static.dir/src/core/psysprocessor/PGUtils.cpp.o
[ 52%] Building CXX object CMakeFiles/camhal_static.dir/src/core/psysprocessor/ShareReferBufferPool.cpp.o
[ 53%] Building CXX object CMakeFiles/camhal_static.dir/src/hal/CameraHal.cpp.o
[ 54%] Building CXX object CMakeFiles/camhal_static.dir/src/hal/ICamera.cpp.o
[ 55%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/CameraLog.cpp.o
[ 56%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/LogSink.cpp.o
[ 57%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/ModuleTags.cpp.o
[ 58%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/CameraDump.cpp.o
[ 59%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/Trace.cpp.o
[ 60%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/ScopedAtrace.cpp.o
[ 61%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/Thread.cpp.o
[ 62%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/Utils.cpp.o
[ 63%] Building CXX object CMakeFiles/camhal_static.dir/src/iutils/SwImageConverter.cpp.o
[ 64%] Building CXX object CMakeFiles/camhal_static.dir/src/metadata/icamera_metadata_base.cpp.o
[ 65%] Building CXX object CMakeFiles/camhal_static.dir/src/metadata/CameraMetadata.cpp.o
[ 67%] Building CXX object CMakeFiles/camhal_static.dir/src/metadata/Parameters.cpp.o
[ 68%] Building CXX object CMakeFiles/camhal_static.dir/src/metadata/ParameterHelper.cpp.o
[ 69%] Building CXX object CMakeFiles/camhal_static.dir/src/metadata/ParameterGenerator.cpp.o
[ 70%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/ParserBase.cpp.o
[ 71%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/PlatformData.cpp.o
[ 72%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/CameraParser.cpp.o
[ 73%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/PolicyParser.cpp.o
[ 74%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/AiqInitData.cpp.o
[ 75%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/gc/GraphUtils.cpp.o
[ 76%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/gc/GraphConfigManager.cpp.o
[ 77%] Building CXX object CMakeFiles/camhal_static.dir/src/platformdata/gc/GraphConfig.cpp.o
[ 78%] Building CXX object CMakeFiles/camhal_static.dir/src/scheduler/CameraScheduler.cpp.o
[ 79%] Building CXX object CMakeFiles/camhal_static.dir/src/scheduler/CameraSchedulerPolicy.cpp.o
[ 80%] Building CXX object CMakeFiles/camhal_static.dir/src/v4l2/MediaControl.cpp.o
[ 81%] Building CXX object CMakeFiles/camhal_static.dir/src/v4l2/V4l2DeviceFactory.cpp.o
[ 82%] Building CXX object CMakeFiles/camhal_static.dir/src/v4l2/SysCall.cpp.o
[ 83%] Building CXX object CMakeFiles/camhal_static.dir/src/v4l2/NodeInfo.cpp.o
[ 84%] Building CXX object CMakeFiles/camhal_static.dir/modules/v4l2/v4l2_device.cc.o
[ 85%] Building CXX object CMakeFiles/camhal_static.dir/modules/v4l2/v4l2_subdevice.cc.o
[ 86%] Building CXX object CMakeFiles/camhal_static.dir/modules/v4l2/v4l2_video_node.cc.o
[ 87%] Building CXX object CMakeFiles/camhal_static.dir/modules/algowrapper/IntelCca.cpp.o
[ 88%] Building CXX object CMakeFiles/camhal_static.dir/modules/algowrapper/graph/GraphConfigImpl.cpp.o
[ 89%] Building CXX object CMakeFiles/camhal_static.dir/modules/algowrapper/graph/GraphConfigPipe.cpp.o
[ 90%] Building CXX object CMakeFiles/camhal_static.dir/modules/algowrapper/IntelPGParam.cpp.o
[ 91%] Building CXX object CMakeFiles/camhal_static.dir/src/image_process/ImageConverter.cpp.o
[ 92%] Building CXX object CMakeFiles/camhal_static.dir/src/image_process/ImageScalerCore.cpp.o
[ 93%] Building CXX object CMakeFiles/camhal_static.dir/modules/ia_cipr/src/Buffer.cpp.o
[ 94%] Building CXX object CMakeFiles/camhal_static.dir/modules/ia_cipr/src/Context.cpp.o
[ 95%] Building CXX object CMakeFiles/camhal_static.dir/modules/ia_cipr/src/Event.cpp.o
[ 96%] Building CXX object CMakeFiles/camhal_static.dir/modules/ia_cipr/src/Command.cpp.o
[ 97%] Building CXX object CMakeFiles/camhal_static.dir/modules/ia_cipr/src/Utils.cpp.o
[ 98%] Linking CXX static library libcamhal.a
[ 98%] Built target camhal_static
[100%] Linking CXX shared library libcamhal.so
[100%] Built target camhal
==> Betrete fakeroot Umgebung...
==> Beginne package()...
-- Install configuration: "Release"
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/api
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/api/Parameters.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/api/ICamera.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/api/intel_vendor_metadata_tags.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/v4l2-subdev.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/media-bus-format.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/media.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/v4l2-controls.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/ipu-isys.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/v4l2-common.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/videodev2.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/linux/v4l2-mediabus.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/utils
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/include/libcamhal/utils/ScopedAtrace.h
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/HM2170_1SG205N3_OS_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/HI556_1BG502T3_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/HM2170_1SG205N3_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/OV02C10_1SG204N3_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/OV2740_CJFLE23_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/ov01a1s.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/libcamhal_profile.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/OV02C10_1BG203N3_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/psys_policy_profiles.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/HI556_CJFLE25_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/ov01a10.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/hi556.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/OV02C10_CIFME14_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_HI556_CJFLE25_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_descriptor.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_ov13b10.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_HM2170_1SG205N3_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_HM2170_CJFME18_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_HI556_1BG502T3_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_OV02C10_CIFME14_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_ov01a1s.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_hm2170_1SG205N3_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_OV02C10_1SG204N3_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_OV2740_CJFLE23_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_OV02C10_1BG203N3_ADL.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_ov8856.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/gcss/graph_settings_ov01a10.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/HM2170_1SG205N3_MB_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/HM2170_CJFME18_ADL.aiqb
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov8856-wf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov8856-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov02c10-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/hm2170-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov13b10-wf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov13b10-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/hi556-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov01a10-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov2740-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/share/defaults/etc/camera/sensors/ov01a1s-uf.xml
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/lib/libcamhal.so
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/lib/libcamhal.a
-- Installing: /home/striczkof/Dokumente/archlinux-ipu6-webcam/intel-ipu6ep-camera-hal-git/pkg/intel-ipu6ep-camera-hal-git-fix/usr/lib/pkgconfig/libcamhal.pc
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "intel-ipu6ep-camera-hal-git-fix"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: intel-ipu6ep-camera-hal-git-fix r56.884b81a-1 (Sat 01 Jul 2023 20:52:18)
==> Installiere Paket intel-ipu6ep-camera-hal-git-fix mit pacman -U...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) intel-ipu6ep-camera-hal-git-fix-r56.884b81a-1
Gesamtgröße der installierten Pakete: 13.82 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
intel-ipu6ep-camera-hal-git-fix wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/1) Arming ConditionNeedsUpdate...
~/Dokumente/archlinux-ipu6-webcam
=> SUCCESS
# Build and install package: v4l2loopback-dkms-git
~/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git ~/Dokumente/archlinux-ipu6-webcam
==> Erstelle Paket: v4l2loopback-dkms-git-fix r10.f94def5-1 (Sat 01 Jul 2023 20:52:18)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> Installiere fehlende Abhängigkeiten...
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (2) perl-locale-gettext-1.07-13 help2man-1.49.3-1
Gesamtgröße des Downloads: 0.20 MiB
Gesamtgröße der installierten Pakete: 0.41 MiB
:: Installation fortsetzen? [J/n]
:: Pakete werden empfangen …
help2man-1.49.3-1-x86_64 wird heruntergeladen …
perl-locale-gettext-1.07-13-x86_64 wird heruntergeladen …
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
perl-locale-gettext wird installiert …
help2man wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/3) Arming ConditionNeedsUpdate...
(2/3) Warn about old perl modules
(3/3) Updating the info directory file...
==> Empfange Quellen...
-> Klone das v4l2loopback git Repo...
Klone in Bare-Repository '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git/v4l2loopback' ...
==> Überprüfe source Dateien mit md5sums...
v4l2loopback ... Übersprungen
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des v4l2loopback git Repos...
Klone nach 'v4l2loopback'...
Fertig.
Zu neuem Branch 'makepkg' gewechselt
==> Beginne prepare()...
patching file v4l2loopback.c
patching file v4l2loopback.c
patching file dkms.conf
==> Beginne pkgver()...
==> Betrete fakeroot Umgebung...
==> Beginne package()...
'COPYING' -> '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git/pkg/v4l2loopback-dkms-git-fix/usr/share/licenses/v4l2loopback/COPYING'
install -p -m 755 -d "/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git/pkg/v4l2loopback-dkms-git-fix/usr/bin"
help2man -N --name "control v4l2 loopback devices" utils/v4l2loopback-ctl > man/v4l2loopback-ctl.1
install -p -m 755 utils/v4l2loopback-ctl "/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git/pkg/v4l2loopback-dkms-git-fix/usr/bin"
install -p -m 755 -d "/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git/pkg/v4l2loopback-dkms-git-fix/usr/share/man/man1"
install -m 644 man/v4l2loopback-ctl.1 "/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2loopback-dkms-git/pkg/v4l2loopback-dkms-git-fix/usr/share/man/man1"
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "v4l2loopback-dkms-git-fix"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: v4l2loopback-dkms-git-fix r10.f94def5-1 (Sat 01 Jul 2023 20:52:29)
==> Installiere Paket v4l2loopback-dkms-git-fix mit pacman -U...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) v4l2loopback-dkms-git-fix-r10.f94def5-1
Gesamtgröße der installierten Pakete: 0.23 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
v4l2loopback-dkms-git-fix wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/2) Arming ConditionNeedsUpdate...
(2/2) Install DKMS modules
==> dkms install --no-depmod v4l2loopback/r10.f94def5 -k 6.1.31-2-MANJARO
==> depmod 6.1.31-2-MANJARO
~/Dokumente/archlinux-ipu6-webcam
=> SUCCESS
# Build and install package: v4l2-relayd
~/Dokumente/archlinux-ipu6-webcam/v4l2-relayd ~/Dokumente/archlinux-ipu6-webcam
==> Erstelle Paket: v4l2-relayd r42.6fd6b6a-1 (Sat 01 Jul 2023 20:52:32)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> Empfange Quellen...
-> Klone das v4l2-relayd git Repo...
Klone in Bare-Repository '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/v4l2-relayd' ...
==> Überprüfe source Dateien mit sha256sums...
v4l2-relayd ... Übersprungen
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des v4l2-relayd git Repos...
Klone nach 'v4l2-relayd'...
Fertig.
Warnung: HEAD des Remote-Repositories verweist auf nicht existierende Referenz, kann nicht ausgecheckt werden
Zu neuem Branch 'makepkg' gewechselt
==> Beginne pkgver()...
==> Beginne build()...
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
autoreconf: configure.ac: tracing
autoreconf: configure.ac: creating directory build-aux
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
autoreconf: running: /usr/bin/autoconf --force
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:51: installing 'build-aux/compile'
configure.ac:60: installing 'build-aux/config.guess'
configure.ac:60: installing 'build-aux/config.sub'
configure.ac:22: installing 'build-aux/install-sh'
configure.ac:22: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
autoreconf: Leaving directory '.'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking whether make supports nested variables... (cached) yes
./configure: line 3277: AX_CHECK_ENABLE_DEBUG: command not found
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating ./config.lt
config.lt: creating libtool
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for DEPS... yes
checking for GST... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
git.mk: Generating .gitignore
make all-recursive
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird betreten
Making all in .
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird betreten
CC src/v4l2_relayd-v4l2-relayd.o
CCLD src/v4l2-relayd
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird verlassen
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird verlassen
==> Betrete fakeroot Umgebung...
==> Beginne package()...
Making install in .
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird betreten
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird betreten
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/etc/modprobe.d'
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/lib/modules-load.d'
/usr/bin/install -c -m 644 data/etc/modprobe.d/v4l2-relayd.conf '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/etc/modprobe.d'
/usr/bin/install -c -m 644 data/etc/modules-load.d/v4l2-relayd.conf '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/lib/modules-load.d'
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/etc/default'
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/lib/systemd/system'
/usr/bin/install -c -m 644 data/etc/default/v4l2-relayd '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/etc/default'
/usr/bin/install -c -m 644 data/systemd/v4l2-relayd.service '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/lib/systemd/system'
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/bin'
/bin/sh ./libtool --mode=install /usr/bin/install -c src/v4l2-relayd '/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/bin'
libtool: install: /usr/bin/install -c src/v4l2-relayd /home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/pkg/v4l2-relayd//usr/bin/v4l2-relayd
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird verlassen
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/v4l2-relayd/src/v4l2-relayd“ wird verlassen
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "v4l2-relayd"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: v4l2-relayd r42.6fd6b6a-1 (Sat 01 Jul 2023 20:52:42)
==> Installiere Paket v4l2-relayd mit pacman -U...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) v4l2-relayd-r42.6fd6b6a-1
Gesamtgröße der installierten Pakete: 0.02 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
v4l2-relayd wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/2) Reloading system manager configuration...
(2/2) Arming ConditionNeedsUpdate...
~/Dokumente/archlinux-ipu6-webcam
=> SUCCESS
# Build and install package: icamerasrc-git
~/Dokumente/archlinux-ipu6-webcam/icamerasrc-git ~/Dokumente/archlinux-ipu6-webcam
==> Erstelle Paket: icamerasrc-git-fix r59.17841ab-1 (Sat 01 Jul 2023 20:52:42)
==> Prüfe Laufzeit-Abhängigkeiten...
==> Prüfe Buildtime-Abhängigkeiten...
==> Empfange Quellen...
-> Klone das icamerasrc git Repo...
Klone in Bare-Repository '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/icamerasrc' ...
==> Überprüfe source Dateien mit sha256sums...
icamerasrc ... Übersprungen
==> Entpacke Quellen...
-> Erstelle Arbeitskopie des icamerasrc git Repos...
Klone nach 'icamerasrc'...
Fertig.
Zu neuem Branch 'makepkg' gewechselt
==> Beginne pkgver()...
==> Beginne build()...
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: aclocal --force
autoreconf: running: /usr/bin/autoconf --force
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:67: installing './compile'
configure.ac:67: installing './config.guess'
configure.ac:67: installing './config.sub'
configure.ac:57: installing './install-sh'
configure.ac:57: installing './missing'
Makefile.am: installing './INSTALL'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am: Consider adding the COPYING file to the version control system
Makefile.am: for your code, to avoid questions about which license your project uses
src/Makefile.am: installing './depcomp'
autoreconf: no config.status: cannot re-make
autoreconf: Leaving directory '.'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for gcc... gcc
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pkg-config...
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GST... yes
checking for CAMHAL... yes
checking for LIBDRM... yes
checking to see if compiler understands -Wall... yes
checking check if CHROME_SLIM_CAMHAL is ON... yes
checking check if STRIP_VIRTUAL_CHANNEL_CAMHAL is ON... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/interfaces/Makefile
config.status: creating libgsticamerasrc.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type 'make' to compile this module.
make all-recursive
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird betreten
Making all in src
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird betreten
Making all in interfaces
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces“ wird betreten
/bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcamera3ainterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcamera3ainterface.Tpo -c -o libgsticamerainterface_1.0_la-gstcamera3ainterface.lo `test -f 'gstcamera3ainterface.cpp' || echo './'`gstcamera3ainterface.cpp
/bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcameraispinterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcameraispinterface.Tpo -c -o libgsticamerainterface_1.0_la-gstcameraispinterface.lo `test -f 'gstcameraispinterface.cpp' || echo './'`gstcameraispinterface.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcamera3ainterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcamera3ainterface.Tpo -c gstcamera3ainterface.cpp -fPIC -DPIC -o .libs/libgsticamerainterface_1.0_la-gstcamera3ainterface.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcameraispinterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcameraispinterface.Tpo -c gstcameraispinterface.cpp -fPIC -DPIC -o .libs/libgsticamerainterface_1.0_la-gstcameraispinterface.o
mv -f .deps/libgsticamerainterface_1.0_la-gstcameraispinterface.Tpo .deps/libgsticamerainterface_1.0_la-gstcameraispinterface.Plo
/bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcameradewarpinginterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcameradewarpinginterface.Tpo -c -o libgsticamerainterface_1.0_la-gstcameradewarpinginterface.lo `test -f 'gstcameradewarpinginterface.cpp' || echo './'`gstcameradewarpinginterface.cpp
mv -f .deps/libgsticamerainterface_1.0_la-gstcamera3ainterface.Tpo .deps/libgsticamerainterface_1.0_la-gstcamera3ainterface.Plo
/bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcamerawfovinterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcamerawfovinterface.Tpo -c -o libgsticamerainterface_1.0_la-gstcamerawfovinterface.lo `test -f 'gstcamerawfovinterface.cpp' || echo './'`gstcamerawfovinterface.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcameradewarpinginterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcameradewarpinginterface.Tpo -c gstcameradewarpinginterface.cpp -fPIC -DPIC -o .libs/libgsticamerainterface_1.0_la-gstcameradewarpinginterface.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -std=c++11 -Wall -Werror -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -DCHROME_SLIM_CAMHAL -fstack-protector-all -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerainterface_1.0_la-gstcamerawfovinterface.lo -MD -MP -MF .deps/libgsticamerainterface_1.0_la-gstcamerawfovinterface.Tpo -c gstcamerawfovinterface.cpp -fPIC -DPIC -o .libs/libgsticamerainterface_1.0_la-gstcamerawfovinterface.o
mv -f .deps/libgsticamerainterface_1.0_la-gstcamerawfovinterface.Tpo .deps/libgsticamerainterface_1.0_la-gstcamerawfovinterface.Plo
mv -f .deps/libgsticamerainterface_1.0_la-gstcameradewarpinginterface.Tpo .deps/libgsticamerainterface_1.0_la-gstcameradewarpinginterface.Plo
/bin/sh ../../libtool --tag=CXX --mode=link g++ -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Wl,-z,relro -Wl,-z,now -version-info 1:0:0 -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -o libgsticamerainterface-1.0.la -rpath /usr/lib libgsticamerainterface_1.0_la-gstcamera3ainterface.lo libgsticamerainterface_1.0_la-gstcameraispinterface.lo libgsticamerainterface_1.0_la-gstcameradewarpinginterface.lo libgsticamerainterface_1.0_la-gstcamerawfovinterface.lo -lgstbase-1.0 -lgstcontroller-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lcamhal
libtool: link: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/crtbeginS.o .libs/libgsticamerainterface_1.0_la-gstcamera3ainterface.o .libs/libgsticamerainterface_1.0_la-gstcameraispinterface.o .libs/libgsticamerainterface_1.0_la-gstcameradewarpinginterface.o .libs/libgsticamerainterface_1.0_la-gstcamerawfovinterface.o -lgstbase-1.0 -lgstcontroller-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lcamhal -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib/crtn.o -march=x86-64 -mtune=generic -O2 -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,libgsticamerainterface-1.0.so.1 -o .libs/libgsticamerainterface-1.0.so.1.0.0
libtool: link: (cd ".libs" && rm -f "libgsticamerainterface-1.0.so.1" && ln -s "libgsticamerainterface-1.0.so.1.0.0" "libgsticamerainterface-1.0.so.1")
libtool: link: (cd ".libs" && rm -f "libgsticamerainterface-1.0.so" && ln -s "libgsticamerainterface-1.0.so.1.0.0" "libgsticamerainterface-1.0.so")
libtool: link: ( cd ".libs" && rm -f "libgsticamerainterface-1.0.la" && ln -s "../libgsticamerainterface-1.0.la" "libgsticamerainterface-1.0.la" )
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces“ wird verlassen
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird betreten
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcamerasrc.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcamerasrc.Tpo -c -o libgsticamerasrc_la-gstcamerasrc.lo `test -f 'gstcamerasrc.cpp' || echo './'`gstcamerasrc.cpp
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcameraformat.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcameraformat.Tpo -c -o libgsticamerasrc_la-gstcameraformat.lo `test -f 'gstcameraformat.cpp' || echo './'`gstcameraformat.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcameraformat.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcameraformat.Tpo -c gstcameraformat.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-gstcameraformat.o
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcamerasrc.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcamerasrc.Tpo -c gstcamerasrc.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-gstcamerasrc.o
mv -f .deps/libgsticamerasrc_la-gstcameraformat.Tpo .deps/libgsticamerasrc_la-gstcameraformat.Plo
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcamerasrcbufferpool.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcamerasrcbufferpool.Tpo -c -o libgsticamerasrc_la-gstcamerasrcbufferpool.lo `test -f 'gstcamerasrcbufferpool.cpp' || echo './'`gstcamerasrcbufferpool.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcamerasrcbufferpool.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcamerasrcbufferpool.Tpo -c gstcamerasrcbufferpool.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-gstcamerasrcbufferpool.o
mv -f .deps/libgsticamerasrc_la-gstcamerasrcbufferpool.Tpo .deps/libgsticamerasrc_la-gstcamerasrcbufferpool.Plo
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcameradeinterlace.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcameradeinterlace.Tpo -c -o libgsticamerasrc_la-gstcameradeinterlace.lo `test -f 'gstcameradeinterlace.cpp' || echo './'`gstcameradeinterlace.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcameradeinterlace.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcameradeinterlace.Tpo -c gstcameradeinterlace.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-gstcameradeinterlace.o
mv -f .deps/libgsticamerasrc_la-gstcamerasrc.Tpo .deps/libgsticamerasrc_la-gstcamerasrc.Plo
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcambasesrc.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcambasesrc.Tpo -c -o libgsticamerasrc_la-gstcambasesrc.lo `test -f 'gstcambasesrc.cpp' || echo './'`gstcambasesrc.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcambasesrc.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcambasesrc.Tpo -c gstcambasesrc.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-gstcambasesrc.o
mv -f .deps/libgsticamerasrc_la-gstcameradeinterlace.Tpo .deps/libgsticamerasrc_la-gstcameradeinterlace.Plo
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcampushsrc.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcampushsrc.Tpo -c -o libgsticamerasrc_la-gstcampushsrc.lo `test -f 'gstcampushsrc.cpp' || echo './'`gstcampushsrc.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-gstcampushsrc.lo -MD -MP -MF .deps/libgsticamerasrc_la-gstcampushsrc.Tpo -c gstcampushsrc.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-gstcampushsrc.o
mv -f .deps/libgsticamerasrc_la-gstcampushsrc.Tpo .deps/libgsticamerasrc_la-gstcampushsrc.Plo
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-utils.lo -MD -MP -MF .deps/libgsticamerasrc_la-utils.Tpo -c -o libgsticamerasrc_la-utils.lo `test -f 'utils.cpp' || echo './'`utils.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-4 -pthread -Wall -I/usr/include/libcamhal -I/usr/include/libcamhal/api -I/usr/include/libcamhal/utils -I/usr/include/libdrm -std=c++11 -Werror -I../src/interfaces -DDEFAULT_PROP_DEVICE_ID=0 -DCHROME_SLIM_CAMHAL -DSTRIP_VIRTUAL_CHANNEL_CAMHAL -fstack-protector -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -MT libgsticamerasrc_la-utils.lo -MD -MP -MF .deps/libgsticamerasrc_la-utils.Tpo -c utils.cpp -fPIC -DPIC -o .libs/libgsticamerasrc_la-utils.o
mv -f .deps/libgsticamerasrc_la-utils.Tpo .deps/libgsticamerasrc_la-utils.Plo
mv -f .deps/libgsticamerasrc_la-gstcambasesrc.Tpo .deps/libgsticamerasrc_la-gstcambasesrc.Plo
/bin/sh ../libtool --tag=CXX --mode=link g++ -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -module -avoid-version -export-symbols-regex _*\(gst_\|Gst\|GST_\).* -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Wl,-z,relro -Wl,-z,now -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -o libgsticamerasrc.la -rpath /usr/lib/gstreamer-1.0 libgsticamerasrc_la-gstcamerasrc.lo libgsticamerasrc_la-gstcameraformat.lo libgsticamerasrc_la-gstcamerasrcbufferpool.lo libgsticamerasrc_la-gstcameradeinterlace.lo libgsticamerasrc_la-gstcambasesrc.lo libgsticamerasrc_la-gstcampushsrc.lo libgsticamerasrc_la-utils.lo -lgstbase-1.0 -lgstcontroller-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lgstallocators-1.0 -lgstvideo-1.0 interfaces/libgsticamerainterface-1.0.la -ldrm_intel -ldrm -lcamhal
libtool: link: /usr/bin/nm -B .libs/libgsticamerasrc_la-gstcamerasrc.o .libs/libgsticamerasrc_la-gstcameraformat.o .libs/libgsticamerasrc_la-gstcamerasrcbufferpool.o .libs/libgsticamerasrc_la-gstcameradeinterlace.o .libs/libgsticamerasrc_la-gstcambasesrc.o .libs/libgsticamerasrc_la-gstcampushsrc.o .libs/libgsticamerasrc_la-utils.o | /usr/bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /usr/bin/sed '/ __gnu_lto/d' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/libgsticamerasrc.exp
libtool: link: /usr/bin/grep -E -e "_*(gst_|Gst|GST_).*" ".libs/libgsticamerasrc.exp" > ".libs/libgsticamerasrc.expT"
libtool: link: mv -f ".libs/libgsticamerasrc.expT" ".libs/libgsticamerasrc.exp"
libtool: link: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/crtbeginS.o .libs/libgsticamerasrc_la-gstcamerasrc.o .libs/libgsticamerasrc_la-gstcameraformat.o .libs/libgsticamerasrc_la-gstcamerasrcbufferpool.o .libs/libgsticamerasrc_la-gstcameradeinterlace.o .libs/libgsticamerasrc_la-gstcambasesrc.o .libs/libgsticamerasrc_la-gstcampushsrc.o .libs/libgsticamerasrc_la-utils.o -Wl,-rpath -Wl,/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces/.libs -lgstallocators-1.0 -lgstvideo-1.0 interfaces/.libs/libgsticamerainterface-1.0.so -lgstbase-1.0 -lgstcontroller-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -ldrm_intel -ldrm -lcamhal -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib/crtn.o -march=x86-64 -mtune=generic -O2 -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,libgsticamerasrc.so -Wl,-retain-symbols-file -Wl,.libs/libgsticamerasrc.exp -o .libs/libgsticamerasrc.so
libtool: link: ( cd ".libs" && rm -f "libgsticamerasrc.la" && ln -s "../libgsticamerasrc.la" "libgsticamerasrc.la" )
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird verlassen
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird verlassen
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird betreten
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird verlassen
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird verlassen
==> Betrete fakeroot Umgebung...
==> Beginne package()...
Making install in src
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird betreten
Making install in interfaces
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces“ wird betreten
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces“ wird betreten
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/include/gstreamer-1.0/gst/icamera'
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib'
/bin/sh ../../libtool --mode=install /usr/bin/install -c libgsticamerainterface-1.0.la '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib'
/usr/bin/install -c -m 644 gstcamera3ainterface.h gstcameraispinterface.h gstcameradewarpinginterface.h gstcamerawfovinterface.h '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/include/gstreamer-1.0/gst/icamera'
libtool: install: /usr/bin/install -c .libs/libgsticamerainterface-1.0.so.1.0.0 /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/libgsticamerainterface-1.0.so.1.0.0
libtool: install: (cd /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib && { ln -s -f libgsticamerainterface-1.0.so.1.0.0 libgsticamerainterface-1.0.so.1 || { rm -f libgsticamerainterface-1.0.so.1 && ln -s libgsticamerainterface-1.0.so.1.0.0 libgsticamerainterface-1.0.so.1; }; })
libtool: install: (cd /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib && { ln -s -f libgsticamerainterface-1.0.so.1.0.0 libgsticamerainterface-1.0.so || { rm -f libgsticamerainterface-1.0.so && ln -s libgsticamerainterface-1.0.so.1.0.0 libgsticamerainterface-1.0.so; }; })
libtool: install: /usr/bin/install -c .libs/libgsticamerainterface-1.0.lai /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/libgsticamerainterface-1.0.la
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces“ wird verlassen
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src/interfaces“ wird verlassen
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird betreten
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird betreten
make[3]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/gstreamer-1.0'
/bin/sh ../libtool --mode=install /usr/bin/install -c libgsticamerasrc.la '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/gstreamer-1.0'
libtool: warning: relinking 'libgsticamerasrc.la'
libtool: install: (cd /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src; /bin/sh "/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/libtool" --tag CXX --mode=relink g++ -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -Wp,-D_GLIBCXX_ASSERTIONS -module -avoid-version -export-symbols-regex "_*(gst_|Gst|GST_).*" -fPIE -fPIC -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Wl,-z,relro -Wl,-z,now -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -o libgsticamerasrc.la -rpath /usr/lib/gstreamer-1.0 libgsticamerasrc_la-gstcamerasrc.lo libgsticamerasrc_la-gstcameraformat.lo libgsticamerasrc_la-gstcamerasrcbufferpool.lo libgsticamerasrc_la-gstcameradeinterlace.lo libgsticamerasrc_la-gstcambasesrc.lo libgsticamerasrc_la-gstcampushsrc.lo libgsticamerasrc_la-utils.lo -lgstbase-1.0 -lgstcontroller-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -lgstallocators-1.0 -lgstvideo-1.0 interfaces/libgsticamerainterface-1.0.la -ldrm_intel -ldrm -lcamhal -inst-prefix-dir /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix)
libtool: relink: /usr/bin/nm -B .libs/libgsticamerasrc_la-gstcamerasrc.o .libs/libgsticamerasrc_la-gstcameraformat.o .libs/libgsticamerasrc_la-gstcamerasrcbufferpool.o .libs/libgsticamerasrc_la-gstcameradeinterlace.o .libs/libgsticamerasrc_la-gstcambasesrc.o .libs/libgsticamerasrc_la-gstcampushsrc.o .libs/libgsticamerasrc_la-utils.o | /usr/bin/sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /usr/bin/sed '/ __gnu_lto/d' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/libgsticamerasrc.exp
libtool: relink: /usr/bin/grep -E -e "_*(gst_|Gst|GST_).*" ".libs/libgsticamerasrc.exp" > ".libs/libgsticamerasrc.expT"
libtool: relink: mv -f ".libs/libgsticamerasrc.expT" ".libs/libgsticamerasrc.exp"
libtool: relink: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/crtbeginS.o .libs/libgsticamerasrc_la-gstcamerasrc.o .libs/libgsticamerasrc_la-gstcameraformat.o .libs/libgsticamerasrc_la-gstcamerasrcbufferpool.o .libs/libgsticamerasrc_la-gstcameradeinterlace.o .libs/libgsticamerasrc_la-gstcambasesrc.o .libs/libgsticamerasrc_la-gstcampushsrc.o .libs/libgsticamerasrc_la-utils.o -lgstallocators-1.0 -lgstvideo-1.0 -L/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib -L/usr/lib -lgsticamerainterface-1.0 -lgstbase-1.0 -lgstcontroller-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -ldrm_intel -ldrm -lcamhal -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/13.1.1/../../../../lib/crtn.o -march=x86-64 -mtune=generic -O2 -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,libgsticamerasrc.so -Wl,-retain-symbols-file -Wl,.libs/libgsticamerasrc.exp -o .libs/libgsticamerasrc.so
libtool: install: /usr/bin/install -c .libs/libgsticamerasrc.soT /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/gstreamer-1.0/libgsticamerasrc.so
libtool: install: /usr/bin/install -c .libs/libgsticamerasrc.lai /home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/gstreamer-1.0/libgsticamerasrc.la
libtool: warning: remember to run 'libtool --finish /usr/lib/gstreamer-1.0'
make[3]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird verlassen
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird verlassen
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc/src“ wird verlassen
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird betreten
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird betreten
make[2]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/usr/bin/mkdir -p '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/pkgconfig'
/usr/bin/install -c -m 644 libgsticamerasrc.pc '/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/pkg/icamerasrc-git-fix/usr/lib/pkgconfig'
make[2]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird verlassen
make[1]: Verzeichnis „/home/striczkof/Dokumente/archlinux-ipu6-webcam/icamerasrc-git/src/icamerasrc“ wird verlassen
==> Säubere Installation...
-> Entferne libtool Dateien...
-> Bereinige ungewollte Dateien...
-> Entferne statische Bibliotheken...
-> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken...
-> Komprimiere Man-Pages und Info-Seiten...
==> Prüfe auf Paketierungsprobleme...
==> Erstelle Paket "icamerasrc-git-fix"...
-> Erstelle .PKGINFO Datei...
-> Erstelle .BUILDINFO Datei...
-> Erstelle .MTREE-Datei...
-> Komprimiere Paket...
==> Verlasse fakeroot Umgebung.
==> Beendete Erstellung: icamerasrc-git-fix r59.17841ab-1 (Sat 01 Jul 2023 20:52:52)
==> Installiere Paket icamerasrc-git-fix mit pacman -U...
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (1) icamerasrc-git-fix-r59.17841ab-1
Gesamtgröße der installierten Pakete: 0.26 MiB
:: Installation fortsetzen? [J/n]
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
icamerasrc-git-fix wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/2) Reloading device manager configuration...
(2/2) Arming ConditionNeedsUpdate...
~/Dokumente/archlinux-ipu6-webcam
=> SUCCESS
# Install general dependencies
Abhängigkeiten werden aufgelöst …
:: Es stehen 2 Anbieter für pipewire-session-manager zur Verfügung:
:: Repositorium extra
1) wireplumber
:: Repositorium community
2) pipewire-media-session
Geben Sie eine Zahl ein (Voreinstellung=1):
Nach in Konflikt stehenden Paketen wird gesucht …
Pakete (4) libwireplumber-0.4.14-1 lua-5.4.6-1 wireplumber-0.4.14-1 gst-plugin-pipewire-1:0.3.70-2
Gesamtgröße des Downloads: 0.82 MiB
Gesamtgröße der installierten Pakete: 3.80 MiB
:: Installation fortsetzen? [J/n]
:: Pakete werden empfangen …
lua-5.4.6-1-x86_64 wird heruntergeladen …
libwireplumber-0.4.14-1-x86_64 wird heruntergeladen …
wireplumber-0.4.14-1-x86_64 wird heruntergeladen …
gst-plugin-pipewire-1:0.3.70-2-x86_64 wird heruntergeladen …
Schlüsselbund wird geprüft …
Paketintegrität wird geprüft …
Paket-Dateien werden geladen …
Auf Dateikonflikte wird geprüft …
Verfügbarer Festplattenspeicher wird ermittelt …
:: Paketänderungen werden verarbeitet …
libwireplumber wird installiert …
lua wird installiert …
wireplumber wird installiert …
Created symlink /etc/systemd/user/pipewire-session-manager.service → /usr/lib/systemd/user/wireplumber.service.
Created symlink /etc/systemd/user/pipewire.service.wants/wireplumber.service → /usr/lib/systemd/user/wireplumber.service.
gst-plugin-pipewire wird installiert …
:: Post-transaction-Hooks werden gestartet …
(1/1) Arming ConditionNeedsUpdate...
=> SUCCESS
# Enable: v4l2-relayd.service
Created symlink /etc/systemd/system/multi-user.target.wants/v4l2-relayd.service → /usr/lib/systemd/system/v4l2-relayd.service.
=> SUCCESS
# Start: v4l2-relayd.service
=> SUCCESS
# Creating /etc/systemd/system/v4l2-relayd.service.d/override.conf
=> SUCCESS
# Reloading systemd daemon
=> SUCCESS
# Restart: v4l2-relayd.service
=> SUCCESS
All done.
Remember to reboot upon succesful installation!
test.sh (before restart)
Setting pipeline to PAUSED ...
Failed to set pipeline to PAUSED.
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov13b10.aiqb
[07-01 20:54:44.602] CamHAL[ERR] there is no aiqb file:ov13b10
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov13b10.aiqb
[07-01 20:54:44.602] CamHAL[ERR] there is no aiqb file:ov13b10
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov8856.aiqb
[07-01 20:54:44.602] CamHAL[ERR] there is no aiqb file:ov8856
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov8856.aiqb
[07-01 20:54:44.602] CamHAL[ERR] there is no aiqb file:ov8856
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov01a10.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov01a10.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov01a10.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name ov01a10.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_1BG203N3_ADL.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_1BG203N3_ADL.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_1SG204N3_ADL.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_1SG204N3_ADL.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_CIFME14_ADL.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_CIFME14_ADL.aiqb
[07-01 20:54:44.602] CamHAL[INF] aiqb file name OV02C10_1BG203N3_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV02C10_1BG203N3_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV02C10_1SG204N3_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV02C10_1SG204N3_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV02C10_CIFME14_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV02C10_CIFME14_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV2740_CJFLE23_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name OV2740_CJFLE23_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name HM2170_1SG205N3_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name HM2170_1SG205N3_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name HM2170_CJFME18_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name HM2170_CJFME18_ADL.aiqb
[07-01 20:54:44.603] CamHAL[INF] aiqb file name HI556_1BG502T3_ADL.aiqb
[07-01 20:54:44.604] CamHAL[INF] aiqb file name HI556_1BG502T3_ADL.aiqb
[07-01 20:54:44.604] CamHAL[INF] aiqb file name HI556_CJFLE25_ADL.aiqb
[07-01 20:54:44.604] CamHAL[INF] aiqb file name HI556_CJFLE25_ADL.aiqb
[07-01 20:54:44.604] CamHAL[INF] aiqb file name ov01a1s.aiqb
[07-01 20:54:44.604] CamHAL[INF] aiqb file name ov01a1s.aiqb
[07-01 20:54:44.604] CamHAL[ERR] @getDeviceName, Fail open : /sys/class/video4linux/
[07-01 20:54:44.604] CamHAL[ERR] Failed to find DevName for cameraId: 0, get video node: ov13b10 , devname: /dev/v4l-subdev1
[07-01 20:54:44.606] CamHAL[ERR] MediaControl init failed
Setting pipeline to NULL ...
Freeing pipeline ...
test.sh (after restart)
Setting pipeline to PAUSED ...
[07-01 21:06:29.320] CamHAL[INF] aiqb file name ov01a10.aiqb
[07-01 21:06:29.321] CamHAL[INF] aiqb file name ov01a10.aiqb
Pipeline is live and does not need PREROLL ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
(gst-launch-1.0:4216): GStreamer-CRITICAL **: 21:06:29.365: Registering meta implementation 'GstCamerasrcMeta' without init function
Redistribute latency...
ERROR: from element /GstPipeline:pipeline0/GstXImageSink:ximagesink0: Output window was closed
Additional debug info:
../gstreamer/subprojects/gst-plugins-base/sys/ximage/ximagesink.c(855): gst_x_image_sink_handle_xevents (): /GstPipeline:pipeline0/GstXImageSink:ximagesink0
Execution ended after 0:00:06.612988931
Setting pipeline to NULL ...
Enter ia_aiq_get_aiqd_data()
Out-aiqd data size: 41480
[07-01 21:06:36.258] CamHAL[WAR] Failed to open file /run/camera/ov01a10-uf_VIDEO.aiqd, error No such file or directory
Freeing pipeline ...
ffmpeg -f v4l2 -framerate 25 -video_size 640x480 -i /dev/video0 -t 5 output.mkv
ffmpeg version n6.0 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 13.1.1 (GCC) 20230429
configuration: --prefix=/usr --disable-debug --disable-static --disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm --enable-lto --enable-fontconfig --enable-gmp --enable-gnutls --enable-gpl --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libdav1d --enable-libdrm --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libiec61883 --enable-libjack --enable-libjxl --enable-libmfx --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2 --enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc --enable-opencl --enable-opengl --enable-shared --enable-version3 --enable-vulkan
libavutil 58. 2.100 / 58. 2.100
libavcodec 60. 3.100 / 60. 3.100
libavformat 60. 3.100 / 60. 3.100
libavdevice 60. 1.100 / 60. 1.100
libavfilter 9. 3.100 / 9. 3.100
libswscale 7. 1.100 / 7. 1.100
libswresample 4. 10.100 / 4. 10.100
libpostproc 57. 1.100 / 57. 1.100
[video4linux2,v4l2 @ 0x56176d1c3380] The V4L2 driver changed the video from 640x480 to 1280x720
[video4linux2,v4l2 @ 0x56176d1c3380] The driver does not permit changing the time per frame
Input #0, video4linux2,v4l2, from '/dev/video0':
Duration: N/A, start: 3499.590806, bitrate: 442368 kb/s
Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1280x720, 442368 kb/s, 30 fps, 30 tbr, 1000k tbn
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x56176d1c7c40] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x56176d1c7c40] profile High 4:2:2, level 3.1, 4:2:2, 8-bit
[libx264 @ 0x56176d1c7c40] 264 - core 164 r3095 baee400 - H.264/MPEG-4 AVC codec - Copyleft 2003-2022 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=22 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, matroska, to 'output.mkv':
Metadata:
encoder : Lavf60.3.100
Stream #0:0: Video: h264 (H264 / 0x34363248), yuv422p(tv, progressive), 1280x720, q=2-31, 30 fps, 1k tbn
Metadata:
encoder : Lavc60.3.100 libx264
Side data:
cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=1 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=14 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=26 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=38 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=50 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=62 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=74 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=86 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=98 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=110 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=122 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=134 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=146 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=158 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=170 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=182 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=194 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=206 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=214 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=214 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=214 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=214 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=214 speed=N/A
frame= 0 fps=0.0 q=0.0 size= 0kB time=-577014:32:22.77 bitrate= -0.0kbits/s dup=0 drop=214 speed=N/A
frame= 11 fps=0.8 q=28.0 size= 1kB time=00:00:00.33 bitrate= 13.8kbits/s dup=0 drop=214 speed=0.0247x
frame= 23 fps=1.6 q=28.0 size= 1kB time=00:00:00.86 bitrate= 5.3kbits/s dup=0 drop=214 speed=0.0618x
frame= 35 fps=2.4 q=28.0 size= 1kB time=00:00:01.40 bitrate= 3.3kbits/s dup=0 drop=214 speed=0.0961x
frame= 47 fps=3.1 q=28.0 size= 1kB time=00:00:01.93 bitrate= 2.4kbits/s dup=0 drop=214 speed=0.128x
frame= 114 fps=7.4 q=-1.0 Lsize= 709kB time=00:00:04.86 bitrate=1193.4kbits/s dup=0 drop=214 speed=0.316x
video:708kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.195832%
[libx264 @ 0x56176d1c7c40] frame I:2 Avg QP:18.44 size: 8058
[libx264 @ 0x56176d1c7c40] frame P:28 Avg QP:22.13 size: 11587
[libx264 @ 0x56176d1c7c40] frame B:84 Avg QP:22.88 size: 4564
[libx264 @ 0x56176d1c7c40] consecutive B-frames: 1.8% 0.0% 0.0% 98.2%
[libx264 @ 0x56176d1c7c40] mb I I16..4: 62.6% 36.3% 1.1%
[libx264 @ 0x56176d1c7c40] mb P I16..4: 3.8% 4.5% 0.0% P16..4: 65.7% 9.7% 4.9% 0.0% 0.0% skip:11.4%
[libx264 @ 0x56176d1c7c40] mb B I16..4: 0.1% 0.1% 0.0% B16..8: 46.4% 1.8% 0.1% direct: 4.2% skip:47.3% L0:47.4% L1:51.2% BI: 1.4%
[libx264 @ 0x56176d1c7c40] 8x8 transform intra:46.0% inter:94.4%
[libx264 @ 0x56176d1c7c40] coded y,uvDC,uvAC intra: 20.6% 39.6% 1.6% inter: 15.1% 30.4% 0.0%
[libx264 @ 0x56176d1c7c40] i16 v,h,dc,p: 47% 7% 5% 42%
[libx264 @ 0x56176d1c7c40] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 18% 15% 37% 6% 6% 5% 5% 4% 4%
[libx264 @ 0x56176d1c7c40] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 26% 16% 5% 6% 5% 9% 4% 3%
[libx264 @ 0x56176d1c7c40] i8c dc,h,v,p: 67% 12% 17% 4%
[libx264 @ 0x56176d1c7c40] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x56176d1c7c40] ref P L0: 42.8% 5.8% 31.1% 20.3%
[libx264 @ 0x56176d1c7c40] ref B L0: 79.0% 15.0% 6.1%
[libx264 @ 0x56176d1c7c40] ref B L1: 93.1% 6.9%
[libx264 @ 0x56176d1c7c40] kb/s:1158.25
v4l2-ctl --list-devices
ipu6 (PCI:pci:pci0000:00):
/dev/video1
ipu6 (pci:pci0000:00):
/dev/media0
Virtual Camera (platform:v4l2loopback-000):
/dev/video0
systemctl status v4l2-relayd.service
● v4l2-relayd.service - v4l2-relay daemon service
Loaded: loaded (/usr/lib/systemd/system/v4l2-relayd.service; enabled; preset: disabled)
Drop-In: /etc/systemd/system/v4l2-relayd.service.d
└─override.conf
Active: active (running) since Sat 2023-07-01 20:56:03 AEST; 1h 3min ago
Main PID: 978 (v4l2-relayd)
Tasks: 5 (limit: 38009)
Memory: 693.9M
CPU: 20.460s
CGroup: /system.slice/v4l2-relayd.service
└─978 /usr/bin/v4l2-relayd -i icamerasrc -o "appsrc name=appsrc caps=video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! videoconvert ! video/x-raw,format=YUY2 ! v4l2sink name=v4l2sink device=/dev/video0"
Jul 01 20:56:02 alvins-xps9320 systemd[1]: Starting v4l2-relay daemon service...
Jul 01 20:56:03 alvins-xps9320 systemd[1]: Started v4l2-relay daemon service.
Jul 01 20:59:45 alvins-xps9320 v4l2-relayd[978]: Registering meta implementation 'GstCamerasrcMeta' without init function
from archlinux-ipu6-webcam.
naps62
commented on June 20, 2024
@striczkof I just realized I failed to mention a probably important detail.
I use manjaro-sway, with wayland instead of x11 (this is so natural to me nowadays that I forgot to mention). not sure what the default desktop is in manjaro nowadays
I'm also using hyprland as wm instead of sway, although I tested booting with sway again with the same result
from archlinux-ipu6-webcam.
hinricht
commented on June 20, 2024
Same for me, I'm also using manajro-sway with Wayland (Kernel 6.3.5-2-MANJARO). Manjaro-sway is a rolling release so I don't have any version number for it.
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
So uh, @hinricht think I might need more details from you lol like the full install logs even if it is successful (don't forget to run uninstall.sh, delete, then clone the repo again) since i manage to get test.sh working. Also do you happen to have your webcam enabled in your BIOS?
Funny thing now though, I am experiencing exactly the same problem as @naps62 with Firefox not detecting my camera and v4l2-relayd showing "gst_element_set_state: assertion 'GST_IS_ELEMENT (element)' failed" Might be missing some plugins or so that somehow present on most Arch installation but not for manjaro-sway. Doing some more testing.
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
YOOO @naps62 I managed to fix it! Thanks to @stefanpartheym post in https://bbs.archlinux.org/viewtopic.php?id=277462&p=3 (hey if you see this can you merge our PRs xd)
Adding the missing dependencies in an hour then the current PR is ready.
- install gst-plugins-good and gst-plugins-bad (tbh idk which one did it lol):
sudo pacman -S gst-plugins-good gst-plugins-bad - Reload v4l2loopback:
sudo modprobe -r v4l2loopback && sudo modprobe v4l2loopback - Restart v4l2-relayd service:
sudo systemctl restart v4l2-relayd - ????
- PROFIT!!!
Confirmed working on Discord and Firefox with --workaround. The kernel is 6.4.1-5-MANJARO
Also thank you both for forcing me to try out a tiling DE. Sway's actually nice
from archlinux-ipu6-webcam.
naps62
commented on June 20, 2024
@striczkof 🎊 🎊 🎊
gst-plugins-good did it for me. I installed only that one
webcam tested on Chrome / Slack / Discord / Firefox. --workaround was only needed for Firefox, as far as I can tell
is it useful to remove the workaround considering I mainly use chrome? not sure if there are performance benefits
this next part is offtopic, but other people may end up here through google:
my last hanging fruit was the microphone, which also worked on Ubuntu, but only recorded white noise in Arch.
Just found the solution here: https://bbs.archlinux.org/viewtopic.php?pid=2058151#p2058151
In the not working case, can you restore it by running
sudo alsactl initprevent it from breaking in the first place by running
sudo alsactl store
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
Great! That means one fewer dependency to install. Updated the PR already.
I guess conversion might affect the latency a bit? The only way to find out is to compare them quality-wise really. Remove it if you don't need the work around I guess. It now works without the workaround for Firefox 115 so it's not even needed for that.
Problem is my Discord clients (Regular, Arch Electron, and Canary) are still not working without the workaround. @naps62 what client are you using?
from archlinux-ipu6-webcam.
naps62
commented on June 20, 2024
I use he regular one, just with this config change (but I'm pretty sure it's irrelevant for this)
Exec=/usr/bin/discord --enable-features=UseOzonePlatform --ozone-platform=wayland
from archlinux-ipu6-webcam.
striczkof
commented on June 20, 2024
I use he regular one, just with this config change (but I'm pretty sure it's irrelevant for this)
`Exec=/usr/bin/discord --enable-features=UseOzonePlatform --ozone-platform=wayland
Not working on both Arch and Manjaro and with and without options :(
from archlinux-ipu6-webcam.
Related Issues (20)
- gst_element_set_state: assertion 'GST_IS_ELEMENT (element)' failed HOT 1
- Missing Dependency HOT 4
- Pipeline could not be constructed: syntax error HOT 9
- Dell Precision 5470 - camera led is always on when the laptop is plugged HOT 2
- Camera does not work after upgrading to Kernel 6.7.1 HOT 49
- no output on dell xps (kernel v6.7.1) HOT 2
- CapabilityBoundingSet should not be empty
- Ubuntu v4l2loopback dkms will not build on kernel 6.8 HOT 1
- Would this work on fedora? HOT 1
- WARNING: erroneous pipeline: no element "icamerasrc" HOT 4
- Is it possible to modify the resolution HOT 4
- IDEA: Add pamac to default AUR package managers to make script work out-of-the-box on Manjaro HOT 1
- Error while building intel-ipu6ep-camera-hal-git (Dell XPS 13 9315) HOT 16
- Dell XPS 13 plus (9320) on Manjaro 6.6.25-1: Success HOT 1
- New versions of upstream dependencies break the driver. HOT 8
- Reporting success on X1 Carbon Gen 11, 6.6.27-1-MANJARO HOT 1
- driver upstreamed HOT 1
- usage of mainline driver? HOT 9
- Uninstall script not working and installation is broken after manual cleanup HOT 2
- Dell XPS 13 plus 9340 on Manjaro 6.6.32-1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from archlinux-ipu6-webcam.