Trial image with some fixes about maixpy-v1 HOT 7 CLOSED

Thx for all the work :)

from maixpy-v1.

Your welcome. I am creating now a series of PR's to introduce the changes piece by piece.

from maixpy-v1.

So I flashed your image in. How do I use it? When I do screen /dev/ttyACM0 115200, the device turns black, and screen also shows a black screen. Nothing seems to be running. Sorry for the noobie question.

from maixpy-v1.

The port to use did not change. On linux, it is /dev/ttyUSB0 ...

from maixpy-v1.

I was able to flash with /dev/ttyACM0 though. And my system does not have /dev/ttyUSB0. When I removed the device, /dev/ttyACM0 disappeared. When I plugged it back in, /dev/ttyACM0 appeared again. I'm using the included A-to-C USB cable to plug the device to my desktop (C head connected to the Maix GO, A head connected to my desktop).

from maixpy-v1.

So you should be right. I have quite a few different modules here, and gave away my MaixPy device to a friend at the moment. So I may mix up things. After you started it with screen, you should have a Python REPL prompt. Be sure to disable any flow control on the screen program, option -fn. I actually use picocom as terminal emulator. very small and simple.

from maixpy-v1.

Since sipeed published a new version which includes many fixes, this image is kind of obsolete.

from maixpy-v1.