3.5 mm jack and sound from Mozzi Arduino examples about mozzi HOT 3 CLOSED

Hi Frank,
this is just the way I do it... by pressing "record" in audacity. Does
that work for you?
tim

On 15 May 2013 22:47, Frank68 [email protected] wrote:

Hi I connected a jack back into my powermac - it had two cables the black
to ground and the other to pin 9 on an Arduino demimilanove - i was getting
a readout from my input level meter in the sound input window in Powerbooks
system prefs. But no sound !!

you mention running it through audacity? is this for playback or have i
missed something fundamental

thanks
Frank

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/9
.

from mozzi.

.... that's just to hear it, I should have said.

from mozzi.

Will try it tomorow ty Tim

On 15 May 2013 23:23, Mr Sensorium [email protected] wrote:

Hi Frank,
this is just the way I do it... by pressing "record" in audacity. Does
that work for you?
tim

On 15 May 2013 22:47, Frank68 [email protected] wrote:

Hi I connected a jack back into my powermac - it had two cables the
black
to ground and the other to pin 9 on an Arduino demimilanove - i was
getting
a readout from my input level meter in the sound input window in
Powerbooks
system prefs. But no sound !!

you mention running it through audacity? is this for playback or have i
missed something fundamental

thanks
Frank

—
Reply to this email directly or view it on GitHub<
https://github.com/sensorium/Mozzi/issues/9>
.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/9#issuecomment-17937882
.

Frank Feltham M.Des (RMIT)
Lecturer and Graduating Year Design Project Coordinator
Industrial Design Program
RMIT University
Melbourne Victoria Australia

from mozzi.