This is a cryptocurrency miner for Nvidia GPUs
Algorithm | Coin(s) | Fee |
---|---|---|
alephium | ALPH | 0.7% |
autolykos2 | ERGO | 1.0% |
clore | CLORE | 1.0% |
ethash | ETHW | 0.7% |
ethashb3 | RTH | 1.0% |
etchash | ETC | 0.7% |
ironfish | IRON | 0.7% |
karlsenhash | KLS | 1.0% |
neoxa | NEOX | 1.0% |
neurai | XNA | 1.0% |
nexapow | NEXA | 2.0% |
octa | OCTA | 0.7% |
octopus | CFX | 2.0% |
powblocks | XPB | 0.7% |
ravencoin | RVN | 1.0% |
sha512256d | RXD | 1.0% |
zil | ZIL | 0% |
- (ethash/etchash/octa/powblocks)+alephium
- (ethash/etchash/octa/powblocks)+ironfish
- (ethash/etchash/octa/powblocks)+karlsenhash
- (ethash/etchash/octa/powblocks)+sha512256d
- ethashb3+alephium
- ethashb3+ironfish
- ethashb3+karlsenhash
- ethashb3+sha512256d
- autolykos2+alephium
- autolykos2+ironfish
- autolykos2+karlsenhash
- autolykos2+sha512256d
- octopus+alephium
- octopus+sha512256d
- any single or dual algorithm combination + zil
- Available on Linux and Windows
- Terminal user interface
- Failover pool support
- Temperature, clocks, fan monitoring
- Built-in GPU overclocking support with an option to apply different settings for ZIL
- Temperature limits and fan control
- HTTP API
-a, --algorithm <ALGORITHM>
Selects the mining algorithm
Currently supported:
alephium (ALPH)
autolykos2 (ERGO)
clore (CLORE)
ethash (ETHW)
ethashb3 (RTH)
etchash (ETC)
ironfish (IRON)
karlsenhash (KLS)
neoxa (NEOX)
neurai (XNA)
nexapow (NEXA)
octa (OCTA)
octopus (CFX)
powblocks (XPB)
ravencoin (RVN)
sha512256d (RXD)
zil (ZIL)
To dual or triple mine pass the algorithm list
separated by `+`, e.g. `octa+karlsenhash+zil`
--a1 <ALGORITHM>
Sets the primary algorithm (alternative to `-a`)
--a2 <ALGORITHM>
Sets the second algorithm (alternative to `-a`)
--a3 <ALGORITHM>
Sets the third algorithm (alternative to `-a`)
-o, --url <URL>
Sets the pool URL
Format:
<mining protocol>+<transport protocol>://<pool hostname>:<port number>
Mining protocols: stratum, ethproxy, ethstratum, zmp (zil only)
Transport protocols: tcp, ssl
When dual or triple mining the value should be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
Failover pools are set by using `-o` multiple times.
Examples:
-o stratum+ssl://pool.woolypooly.com:3112
-o zmp+tcp://us1-zil.shardpool.io:3333
mine Zilliqa to shardpool using ZMP protocol
-o [1]stratum+tcp://eth.f2pool.com:6688 -o [2]stratum+ssl://pool.woolypooly.com:3112
mine the primary algorithm to f2pool and the second algorithm to woolypooly
-u, --username <USERNAME>
Sets the username for pool authorisation
When dual or triple mining the value should be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
-p, --password <PASSWORD>
Sets the password for pool authorisation
When dual or triple mining the value should be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
-w, --worker <WORKER>
Sets the worker name
When dual or triple mining the value should be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
-d, --devices <D1,D2,...>
Sets GPU devices to use for mining
Must be a comma-separated list of device indices. If not specified,
all detected devices will be used. Devices are ordered by their
PCI bus addresses. First GPU has index of 0.
To display all available devices, use --list-devices.
Example:
-d 0,2,4,5
--list-devices
List available mining devices and exit
--kernel <KERNEL1,KERNEL2,...>
Sets CUDA kernel for selected algorithm(s)
Some algorithms have multiple implementations with different characteristics,
for example, one may be more energy efficient and another can achieve
higher hashrate at a cost of increased power consumption. In such cases
the user can choose the implementation that suits their requirements.
Supported algorithms and values:
nexapow
1 - default kernel
2 - some 20xx and 30xx GPUs may benefit from choosing this kernel
as more energy efficient than #1 when you're after really low
power consumption
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
Example:
--kernel _,_,2,2
GPU#0 and GPU#1 will use their respective default kernels
GPU#1 and GPU#2 will use kernel #2
--dual-mode <MODE1,MODE2,...>
Controls GPU behaviour in dual mining mode
Format: <algo>:<dual ratio>
`<algo>` must be one of the following:
a1 - first algorithm
a2 - second algorithm,
a12 - both
`<dual ratio>` is optional, and, if present,
must be
`rXX` (`dual ratio` coefficient set to `XX`), or
`hXX` (first algorithm hashrate will drop to `XX`%)
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`
Example:
--dual-mode a1,_,a12:r5.2,a12:h92,a2
GPU#0 will mine the primary algorithm
GPU#1 will dual mine with default settings (primary algorithm at 95%)
GPU#2 will dual mine, dual ratio set to 5.2
GPU#3 will dual mine, primary algorithm hashrate at 92%
GPU#4 will mine the second algorithm
--temp-limit <LIMIT1,LIMIT2,...>
Sets GPU thermal limits
Sets the temperatures of GPU core and memory upon reaching which the miner
stops the overheated GPU and waits for it to cool down before resuming.
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`
Examples:
--temp-limit tc[60-70]
stops the GPU when its core temperature reaches 70 degrees celsius
and resumes mining when it cools down to 60 degrees
--temp-limit tm[105-115]
stops the GPU when its memory temperature reaches 115 degrees celsius
and resumes mining when it cools down to 60 degrees
--temp-limit tc[60-70]tm[105-115]
enables both core and memory temperature limits
--cpu-check
Enables CPU verification of found shares before sending them to the pool
--hashrate-avg <SECONDS>
Hashrate averaging window in seconds. Default is 10.
--power-avg <SECONDS>
Power usage averaging window in seconds. Default is 10.
--cclock <FREQ1,FREQ2,...>
Sets GPU core clock frequency offset in MHz
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
--mclock <FREQ1,FREQ2,...>
Sets GPU memory clock frequency offset in MHz
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
--lock-cclock <FREQ1,FREQ2,...>
Locks GPU core clock frequency to the given value in MHz
Comma-separated list of values can be used to set values per-GPU
Set to `X` to reset the locked clock (unlock)
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
--lock-mclock <FREQ1,FREQ2,...>
Locks GPU memory clock frequency to the given value in MHz
Comma-separated list of values can be used to set values per-GPU
Set to `X` to reset the locked clock (unlock)
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
--pl <PL1,PL2,...>
Sets GPU power limit to the given value in Watts
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
--mt <MT1,MT2,...>
Sets memory tweaks for Pascal GPUs with GDDR5/GDDR5X memory
Possible values: 1, 2, 3, 4, 5, 6 (REFRESH will be set to `mt * 16`)
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
--fan-control <FAN1,FAN2,...>
Sets GPU fan control mode
Can either force the GPU fans to work at a given static speed in %,
or adjust the fan speed to keep the GPU temperature (core, memory, or both)
at a desired level (auto-fan mode)
Format:
--fan-control N
set fan speed to `N`%
--fan-control t:[Tc;Tm][Finit;Fmin-Fmax]
enables auto-fan with `Tc` and `Tm` core and memory temperatures
respectively, set initial fan speed to `Finit`% and limit the
fan speed range to [`Fmin`%,`Fmax`%] range.
every value is optional and can be set to underscore `_`
meaning the default value should be used.
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`.
When dual or triple mining the value may be prepended with
the algorithm index `[<index>]`. Primary algorithm has index 1.
Examples:
--fan-control 30
sets GPU fan speed to 30%
--fan-control t:[60;_][50;30-95]
target core temp is 60 degrees, initial fan speed is 50%, 30%-95% range
--fan-control t:[_;90][_;_-95]
target memory temp is 90 degrees, max fan speed 95%
--fan-control t:[70;100][_;_-_]
adjust fan so that core temperature <= 70, memory temperature <= 100,
with no restrictions on the fan speed
--autolykos2-prebuild <AUTOLYKOS2_PREBUILD>
Enables or disables autolykos2 dataset prebuild. Default is "on".
Possible values: on, off
If the prebuild is enabled for a GPU but there is not enough free
memory to hold two datasets, the miner will fall back to using a single
dataset and prebuild will be disabled.
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`
Example:
--autolykos2-prebuild on,off,on
enables prebuild for GPU#0 and GPU#2 and disables for GPU#1
--nexapow-small-lut <NEXAPOW_SMALL_LUT>
Enforces using small LUT for Nexa. Default is "off".
Possible values: on, off
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`
Example:
--nexapow-small-lut on,off,on
enforces small LUT for GPU#0 and GPU#2
--zil <ZIL>
Enables or disables mining Zilliqa per GPU. Default is "on".
Possible values: on, off
Useful for disabling ZIL mining for individual GPUs
Example:
--zil off,on,on
disables ZIL mining for GPU#0
--zil-cache-dag <ZIL_CACHE_DAG>
Enables or disables caching Zilliqa DAG. Default is "on".
Possible values: on, off
If enabled, ZIL DAG is generated when the miner starts up and
is kept in GPU memory at all times even if it means lower performance
for the primary algorithm in dual/triple mining mode.
If disabled, the DAG is built on-demand when a ZIL round starts
and then destroyed after it's finished.
Comma-separated list of values can be used to set values per-GPU
To skip a GPU, set the corresponding value to underscore `_`
Example:
--zil-cache-dag on,off,on
enables DAG cache for GPU#0 and GPU#2 and disables for GPU#1
--zil-countdown
Enables Zilliqa countdown timer
--zil-test
Enables Zilliqa mining test mode
In this mode the miner will connect to a virtual Zilliqa pool which initiates
short ZIL mining sessions more frequently than a normal pool (every 30s).
Useful for making sure the overclock settings are stable when switching
from the primary algorithm to `zil` and back - no need to wait for the next
ZIL window which may start in an hour.
--zil-test-intervals <ZIL_TEST_INTERVALS>
Sets durations of primary algorithm and Zilliqa sessions in test mode
Default value: `[30;30]`
Format:
--zil-test-intervals [D1;D2]
set primary algo duration to `D1` seconds
set ZIL duration to `D2` seconds
Example:
--zil-test-intervals [10;60]
the miner will mine the primary algorithm for 10 seconds, switch to ZIL,
mine ZIL for 60 seconds, switch back, and so on
-l, --log-file <LOG_FILE>
Enables logging output of the miner to the specified log file
--log-network
Enables logging network traffic (useful for debugging)
--api-bind <IP:PORT>
Enables HTTP API and binds it to the specified socket address
Examples:
--api-bind 127.0.0.1:5000
--api-bind 0.0.0.0:5000
--dns-over-https
Enables pool DNS resolution using DNS-over-HTTPS (Cloudflare)
--no-strict-ssl
Disables SSL/TLS certificate verification
Useful with self-hosted mining solutions where the mining pool
provides a self-signed certificate.
However, adding the certificate to the system's trust store
should be preferred.
--stats-interval <SECONDS>
GPU stats reporting interval in seconds. Default is 20.
Set to `X` to disable periodic reports.
--long-timestamps
Enables milliseconds timestamps in the miner output
--no-tui
Disables terminal user interface (TUI)
--no-watchdog
Disables miner watchdog
-h, --help
Print help information (use `-h` for a summary)
-V, --version
Print version information
Discord: https://discord.gg/zKTgcGgc6k
BitcoinTalk: https://bitcointalk.org/index.php?topic=5424675.0