Multi Inverter Support is not working about sbfspot HOT 7 CLOSED

[Pjedr@29/05/2014]
I noticed that too.
If i comment out The line by placing a # only single inverter is reported.

My SMA SB 2000TL-30 is ok, but i have little problems with SMA SB 1600TL-10
-Temperature is reported as 19536540.0 degrees Celsius always.
-All non used phases, has weird high values.
-Just after sunset, a high value is reported in the used phase.

Outputinfo:Resetting teller to 0
1: SUSyID:
2: 125
3: -
4: SN:
5: 940634740
6: (0x3810F274)
7: SMA
8: netID=02
9: SUSyID:
10: 99
11: -
12: SN:
13: 2002282443
14: BT
15: Signal=69%
16: Logon
17: OK
18: Local
19: Time:
20: 29/05/2014
21: 15:30:43
22: TZ
23: offset
24: (s):
25: 7200
26: -
27: DST:
28: On
29: SUSyID:
30: 99
31: -
32: SN:
33: 2002282443
34: Device
35: Name:
36: SN:
37: 2002282443
38: Device
39: Class:
40: PV-omvormer
41: Device
42: Type:
43: SB
44: 1600TL-10
45: Software
46: Version:
47: 12.12.210.R
48: Serial
49: number:
50: 2002282443
51: SUSyID:
52: 99
53: -
54: SN:
55: 2002282443
56: Device
57: Status:
58: OK
59: SUSyID:
60: 99
61: -
62: SN:
63: 2002282443
64: Device
65: Temperature:
66: 19536540.0°C
67: SUSyID:
68: 99
69: -
70: SN:
71: 2002282443
72: GridRelay
73: Status:
74: ?
75: SUSyID:
76: 99
77: -
78: SN:
79: 2002282443
80: Pac
81: max
82: phase
83: 1:
84: 1600W
85: Pac
86: max
87: phase
88: 2:
89: 0W
90: Pac
91: max
92: phase
93: 3:
94: 0W
95: SUSyID:
96: 99
97: -
98: SN:
99: 2002282443
100: Energy
101: Production:
102: EToday:
103: 7.047kWh
ETodayNW=7047
104: ETotal:
105: 2099.899kWh
ETotalNW=2099899
106: Operation
107: Time:
108: 5023.02h
109: Feed-In
110: Time
111: :
112: 4402.87h
113: SUSyID:
114: 99
115: -
116: SN:
117: 2002282443
118: DC
119: Spot
120: Data:
121: String
122: 1
123: Pdc:
124: 1835628.625kW
125: -
126: Udc:
127: 339.00V
EVoltNW=339.00
128: -
129: Idc:
130: 5.192A
EAmpNW=5.192
131: String
132: 2
133: Pdc:
134: 543517.812kW
135: -
136: Udc:
137: 18697720.00V
138: -
139: Idc:
140: 225796.953A
141: SUSyID:
142: 99
143: -
144: SN:
145: 2002282443
146: AC
147: Spot
148: Data:
149: Phase
150: 1
151: Pac
152: :
153: 1632465.000kW
154: -
155: Uac:
156: 234.80V
157: -
158: Iac:
159: 1634497.625A
160: Phase
161: 2
162: Pac
163: :
164: 959995.000kW
165: -
166: Uac:
167: 0.00V
168: -
169: Iac:
170: 1953719.375A
171: Phase
172: 3
173: Pac
174: :
175: 875968.312kW
176: -
177: Uac:
178: 0.00V
179: -
180: Iac:
181: 1836019.625A
182: Total
183: Pac
184: :
185: 1.630kW
EWattNW=0
186: SUSyID:
187: 99
188: -
189: SN:
190: 2002282443
191: Grid
192: Freq.
193: :
194: 50.00Hz
195: SUSyID:
196: 99
197: -
198: SN:
199: 2002282443
200: Current
201: Inverter
202: Time:
203: 29/05/2014
204: 15:30:47
205: Inverter
206: Wake-Up
207: Time:
208: 29/05/2014
209: 15:30:47
210: Inverter
211: Sleep
212: Time
213: :
214: 29/05/2014
215: 15:30:48

from sbfspot.

[Pjedr@29/05/2014]
So commenting out MIS_Enabled is a workaroud i use now.

A functionality in multi inverter support is multipe PVoutput systems support.
I want to upload each inverter to its own PVoutput sid.

from sbfspot.

[Pjedr@29/05/2014]
A functionality in multi inverter support I am missing, is multipe PVoutput systems support.
I want to upload each inverter to its own PVoutput sid. Now doing that still with separate .cfg files.

Thanks for this tool. Using it on raspberry pi and Domoticz domotica.

from sbfspot.

[harryverjans@29/05/2014]
Hi Pjedr,

Commenting out MIS_Enabled is not working.
I still get values of both inverters in pvoutput sid 21305

Regards

Harry

from sbfspot.

[Pjedr@29/05/2014]

Just use separate cfg files with in each MIS_Enabled commented out, and separate PVoutput sid, and blue tooths adress.
#MIS_Enabled (Multi Inverter Support: Default=0 Disabled)
#+------------+-------+-------------+
#| #Inverters | NetID | MIS_Enabled |
#+------------+-------+-------------+
#| 1 | 1 | Don't Care |
#+------------+-------+-------------+
#| 1 | >1 | 0 |
#+------------+-------+-------------+
#| >1 | >1 | 1 |
#+------------+-------+-------------+
#MIS_Enabled=0
./SMAspot -cfgZO.cfg -v -u
BTAddress=00:80:25:25:64:CE
#PVoutput_SID
#Sets PVoutput System ID
PVoutput_SID=8621

./SMAspot -cfgNW.cfg -v -u
BTAddress=00:80:25:2A:54:EC
#PVoutput_SID
#Sets PVoutput System ID
PVoutput_SID=18431
Check also the on screen output, you should see only infro from 1 inverter. 

My southeast inverter
My northwest inverter

from sbfspot.

[SBF@30/05/2014]
Better use V2.4.5 if you have problems with MIS - currently in beta test

from sbfspot.

Issue closed by SBF with comment
Fixed in V245

Reason closed
Fixed

from sbfspot.