sajidali1996 Goto Github PK

anemometer_with_dc_motor

arduino-atmel-spwm

Implementation of an sPWM signal

calculate-thd-in-matlab

Measure the percent THD from a logged Voltage/Current signal in MATLAB

dead-time-for-switching-devices-in-simulink

adding deadtime for Single phase fullbridge inverter

droopcontrol

Linear droop control, non linear droop control and variable dc domestic load model

face-recognition-attendance-system

face-recognition-attendance-system-1

A simple python script that recognises faces and mark attendance for the recognised faces in an excel sheet.

facial-recognition-system-to-automatically-record-attendance-of-coventry-university-students

Final Year Dissertation Project by Asis Rai

fashion-mnist

A MNIST-like fashion product database. Benchmark :point_right:

gantrycranecontroller

Application of LQR and LQG techniques to obtain a suitable response with an optimal input for a gantry crane modelled with two suspended masses.

getunixtimeinsimulink

Get unix time in simulnk for time stamp. Get system time into simulink for logging purposes.

grid-codes

Grid codes address the interconnection of generation systems to the grid and require these systems to remain connected under certain fault situations to "ride through". These demos show common workflows for electric utilities and equipment designers.

image_processing_binarize_and_crop

rgb to gray, then filter then binarize and selective crop

image_show_crop_and_axis_matlab

show image open drag to crop tool and then set xlabel and ylabel on figure

induction-machine-tests-in-simulink

induction machine tests DC test, No load test, Blocked Rotor Test

jtag

JTAG library for Arduino

jtagduino

The JTAGduino project has the goal of using Arduino as a JTAG interface.

jtagwhisperer

Yes, your Arduino can replace an expensive JTAG cable!

learning-github

Learning GitHub

low-voltage-ride-through-via_stateflow

implements low voltage right through with state flow in Simulink

motion-detect-and-email-alert

this project detects motion and sends an email alert with time and date of motion detection. Hardware: Raspberry pi and PIR motion sensor

mppt-with-boostconverter-and-arduino

Hardware implementation and simulation of 500W boost converter MPPT(solar/wind)

opencv

Open Source Computer Vision Library

ota_update

Testing OTA update for bulk system update feature

pll-for-grid-tied-inverter

This shows an example for how to do pll for grid tied inverter synchonization

power-factor-measurement-block-simulink

In this file, power factor has been calculated using the formula; power factor=Real_power/Apparent power.

powerfrequencymeasurement

Measuring power frequency by zero crossing detection method

prep-data-for-thd-analysis-matlab

prepare data in template format for thd analysis , keywords: power frequency fft , powergui

pv_maximum_power_point_tracking_traditional_inc_method

PV_Maximum_power_point_tracking by traditional incremental conductance method along with a boost converter

realtime-hardware-control-and-monitoring-via-arduino-and-simulink

In this project i used Arduino microcontroller to interface simulink with the hardware. Simulink file contain monitoring and control blocks from which hardware can be controlled in realtime.