Comments (24)
verdadom
commented on May 18, 2024
Dear Ryan,
Is this app can be used at Turkey?
from glance.
Rytiggy
commented on May 18, 2024
Hey! @verdadom, what phone do you have Android or iphone?
If you're using Android you can follow this guide to get your blood sugars from your 640g to Nightscout.
https://github.com/pazaan/600SeriesAndroidUploader/wiki/Android-Uploader-Installation
If you need help setting up your nightscout site you can follow this guide
http://www.nightscout.info/wiki/welcome/set-up-nightscout-using-heroku
You can use xDrip+ or nightscout as your data source. If you prefer to use xDrip+ you can enable in the 600 series uploader app send reading to xDrip. I can help with this if you prefer xDrip+.
The app should be able to be used in Turkey, to check can you see the red select button in the Fitbit app store for Glance.
https://gam.fitbit.com/gallery/clock/7b5d9822-7e8e-41f9-a2a7-e823548c001c
Let me know if you have any questions!
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
I am using android phone.
The link does not open.. https://gam.fitbit.com/gallery/clock/7b5d9822-7e8e-41f9-a2a7-e823548c001c
[cid:[email protected]]
What is the Glance?
https://github.com/Rytiggy/Glance/blob/master/README.md
from glance.
Rytiggy
commented on May 18, 2024
You'll need to have the Fitbit app installed on your phone. And click this link on your phone not on your computer
https://gam.fitbit.com/gallery/clock/7b5d9822-7e8e-41f9-a2a7-e823548c001c
Glance is this repository. It is my Fitbit watch faces that helps visualize blood sugars on your Fitbit device.
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
How long does this process take?
I've been waiting since 09:00.
Is there something wrong?
[cid:[email protected]]
from glance.
Rytiggy
commented on May 18, 2024
@verdadom what step are you on?
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
İs the Heroku create new app .
from glance.
Rytiggy
commented on May 18, 2024
Setting up a heroku site can very from person to person, could you send me a pic of the step you're on
from glance.
verdadom
commented on May 18, 2024
Ryan,
This nightschout URL : https://obscure-hollows-17239.herokuapp.com ?
[cid:[email protected]]
from glance.
Rytiggy
commented on May 18, 2024
Youll need to set up your profile you can find it here https://obscure-hollows-17239.herokuapp.com/profile
The profile is used for all your basal, Insulin sensitivity factor (ISF), Carb ration, and bg targets. fill out this page then click save at the bottom. Youll need to enter your API secrete on that page when you click save.
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
Thank you for your Support. Could you please help my other questions too?
As you have mentioned, I have added the values in my profile. Unlike in the website, I can add values for between 00:00 - 03:00 in my pump device. In the website ı can only add values of Insulin to carb ratio and Basal rates for 00:00
[cid:[email protected]]
Could you please inform me about how I can sync the values with my fitbit watch?
Do I have to connect contour next USB device to my phone, to see the continuous data on Nightscout screen?
from glance.
Rytiggy
commented on May 18, 2024
Yep, that's correct for your site profile info. and also correct for the contour next USB device. It has to be connected to your phone in order to be able to get the data from your CGM
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
Can you please answer the following questions?
Could you please inform me about how I can sync the values with my fitbit watch?
As you have mentioned, I have added the values in my profile. Unlike in the website, I can add values for between 00:00 - 03:00 in my pump device. In the website ı can only add values of Insulin to carb ratio and Basal rates for 00:00
[cid:[email protected]]
From: Ryan Mason [mailto:[email protected]]
Sent: Tuesday, November 27, 2018 5:42 PM
To: Rytiggy/Glance <[email protected]>
Cc: Verda Albayrak <[email protected]>; Mention <[email protected]>
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
Yep that's correct for your site profile info. and also correct for the contour next USB device. It has to be connected to your phone in order to be able to get the data from your CGM,
-
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#39 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ArLHcuMJ9o5ZvlJNLT4u_pYnV7ARNnpUks5uzU9CgaJpZM4Ywj0P>.
Sensitivity: Public
from glance.
Rytiggy
commented on May 18, 2024
To sync your bgs on nightscout with Glance enter your nightscout site name
in to Glance's settings under data source.
More info can be found here
https://github.com/Rytiggy/Glance/wiki/How-to-set-up-Glance#2-settings
…On Wed, Nov 28, 2018, 2:42 AM verdadom ***@***.*** wrote:
Hi Ryan,
Can you please answer the following questions?
Could you please inform me about how I can sync the values with my fitbit
watch?
As you have mentioned, I have added the values in my profile. Unlike in
the website, I can add values for between 00:00 - 03:00 in my pump device.
In the website ı can only add values of Insulin to carb ratio and Basal
rates for 00:00
***@***.***
From: Ryan Mason ***@***.***
Sent: Tuesday, November 27, 2018 5:42 PM
To: Rytiggy/Glance ***@***.***>
Cc: Verda Albayrak ***@***.***>; Mention <
***@***.***>
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
Yep that's correct for your site profile info. and also correct for the
contour next USB device. It has to be connected to your phone in order to
be able to get the data from your CGM,
-
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<
#39 (comment)>, or
mute the thread<
https://github.com/notifications/unsubscribe-auth/ArLHcuMJ9o5ZvlJNLT4u_pYnV7ARNnpUks5uzU9CgaJpZM4Ywj0P
>.
Sensitivity: Public
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#39 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/AQm7AvOpa63qCPGRBrYnEW1ngdMR8viuks5uzj57gaJpZM4Ywj0P>
.
from glance.
verdadom
commented on May 18, 2024
Ryan,
I synchronized with my fitbit clock😊
Where does this value come from(+3mg/dl)
want to display the value of active insulin.
[cid:[email protected]]
From: Ryan Mason [mailto:[email protected]]
Sent: Tuesday, November 27, 2018 5:42 PM
To: Rytiggy/Glance <[email protected]>
Cc: Verda Albayrak <[email protected]>; Mention <[email protected]>
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
Yep that's correct for your site profile info. and also correct for the contour next USB device. It has to be connected to your phone in order to be able to get the data from your CGM,
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#39 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ArLHcuMJ9o5ZvlJNLT4u_pYnV7ARNnpUks5uzU9CgaJpZM4Ywj0P>.
Sensitivity: Public
from glance.
Rytiggy
commented on May 18, 2024
That looks to be the delta it's the change from the last BG to the current
BG
…On Wed, Nov 28, 2018, 9:33 AM verdadom ***@***.*** wrote:
Ryan,
I synchronized with my fitbit clock😊
Where does this value come from(+3mg/dl)
want to display the value of active insulin.
***@***.***
From: Ryan Mason ***@***.***
Sent: Tuesday, November 27, 2018 5:42 PM
To: Rytiggy/Glance ***@***.***>
Cc: Verda Albayrak ***@***.***>; Mention <
***@***.***>
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
Yep that's correct for your site profile info. and also correct for the
contour next USB device. It has to be connected to your phone in order to
be able to get the data from your CGM,
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<
#39 (comment)>, or
mute the thread<
https://github.com/notifications/unsubscribe-auth/ArLHcuMJ9o5ZvlJNLT4u_pYnV7ARNnpUks5uzU9CgaJpZM4Ywj0P>.
Sensitivity: Public
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#39 (comment)>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/AQm7AqUuUPihKyNLd6v3ykkPHv2ttUCSks5uzp7GgaJpZM4Ywj0P>
.
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
How can I close the BG?
How do I display active insulin on the fitbit?
from glance.
Rytiggy
commented on May 18, 2024
@verdadom What do you mean by close the BG? youll need to setup Nightscout and use it as a data source to be able to see Active Insulin (IOB) and Carbs on board (COB)
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
I can't see my active insulin value on my Fitbit watch? What could be the reason?
[cid:[email protected]]
From: Ryan Mason [mailto:[email protected]]
Sent: Thursday, November 29, 2018 4:26 PM
To: Rytiggy/Glance <[email protected]>
Cc: Verda Albayrak <[email protected]>; Mention <[email protected]>
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
@verdadom<https://github.com/verdadom> What do you mean by close the BG? youll need to setup Nightscout and use it as a data source to be able to see Active Insulin (IOB) and Carbs on board (COB)
-
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#39 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ArLHcl5XGfLF_4o-cT2fx0cia4B866w7ks5uz-BagaJpZM4Ywj0P>.
Sensitivity: Public
from glance.
Rytiggy
commented on May 18, 2024
What do you have your data source set as, you'll need to use nightscout as your data source if you want to see active insulin (IOB)
from glance.
verdadom
commented on May 18, 2024
Hi Ryan,
Can you please share the screehoot .
From: Ryan Mason [mailto:[email protected]]
Sent: Friday, November 30, 2018 4:44 PM
To: Rytiggy/Glance <[email protected]>
Cc: Verda Albayrak <[email protected]>; Mention <[email protected]>
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
What do you have your data source set as, you'll need to use nightscout as your data source if you want to see active insulin (IOB)
-
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#39 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ArLHcsKUS2G9Oi1Ql8WDGsJwFU95Dso_ks5u0TYmgaJpZM4Ywj0P>.
Sensitivity: Public
from glance.
Rytiggy
commented on May 18, 2024
In Glance's settings what do you have your data source set as?
from glance.
verdadom
commented on May 18, 2024
[Resim]
[Resim]
[Resim]
Android için Outlook<https://aka.ms/ghei36> uygulamasını edinin
…________________________________
From: Ryan Mason <[email protected]>
Sent: Friday, November 30, 2018 5:13:42 PM
To: Rytiggy/Glance
Cc: Verda Albayrak; Mention
Subject: Re: [Rytiggy/Glance] how to use xdrip (#39)
In Glance's settings what do you have your data source set as?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#39 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ArLHcqov2-gQtvZnEPm3ATyGG1nKRACOks5u0T0WgaJpZM4Ywj0P>.
from glance.
Rytiggy
commented on May 18, 2024
@verdadom It doesn't look like you sent any images could you try again from GitHub?
To find this post follow this link:
#39 (comment)
from glance.
Related Issues (20)
- Always On watchface? HOT 3
- No longer working with tomato HOT 3
- Glance not showing any values when pulling from xDrip which is in turn pulling from BYO Dexcom app HOT 2
- Feature Request - Separate thresholds for the graph and alarms
- Dexcom sensor error displays as zero, instead of as stale data
- E404 error HOT 1
- E500 error dexcom login on sense HOT 4
- Sense oxygen data on watchface?
- Missing trend direction HOT 1
- Fitbit Update: Glance stopped working for EU users HOT 1
- Stale data
- More Nightscout sources. HOT 4
- Dexcom stopped pulling data on 08/15/22
- FitBit Sence 2 data not pulling from Dexcom Database
- 404 and 401 errors HOT 9
- Fitbit Versa 4 Always-On is only 24-hr HOT 1
- E404 issue
- Feature request: Seconds in time
- Better support for custom Nightscout URLs HOT 3
- Fitbit Glance face cannot be displayed as Always-on
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from glance.