DDC communication failed ThinkVision T24d-10 about ddcutil HOT 6 OPEN

It has been some time since I looked at the Raspberry PI, but here's what i observe/suggest.

You have a DDC data error. The video driver is reading all zeros from the monitor instead of a proper response to a DDC query. (Note: option --ddc can be used to report just DDC data errors.)

Have you tested with another monitor?

Try doubling the time that ddcutil waits between sending a request and reading the respone, using option --sleep-multiplier 2.0.

Ir may be possible to slow the i2c bus speed using the dtparam baudrate option in config.txt. I can't tell from config.txt what it's set to. Try using 100000, which is standard speed, or if possible 50000, which is half standard speed.

I can't tell from the trace output what version of ddcutil you're running, but it's clearly not the It has been some time since I looked at the Raspberry PI, but here's what i observe/suggest.

You have a DDC data error. The video driver is reading all zeros from the monitor instead of a proper response to a DDC query. (Note: option --ddc can be used to report just DDC data errors.)

Have you tested with another monitor?

Try doubling the time that ddcutil waits between sending a request and reading the respone, using option --sleep-multiplier 2.0.

Ir may be possible to slow the i2c bus speed using the dtparam baudrate option in config.txt. I can't tell from config.txt what it's set to. Try using 100000, which is standard speed, or if possible 50000, which is half standard speed.

I can't tell from the trace output what version of ddcutil you're running, but it's clearly not the latest version 1.3.0. If you can, try building and using release 1.3.0 from github.

If any of this resolves your problem or at least leads to a solution, please post what you found so that others can learn from it.

If not, please execute sudo ddcutil interrogate --verbose and submit the output, again as an attachment.latest version 1.3.0. If you can, try building and using release 1.3.0 from github.

If any of this resolves your problem or at least leads to a solution, please post what you found so that others can learn from it.

If not, please execute sudo ddcutil interrogate --verbose and submit the output, again as an attachment.

from ddcutil.

I've tried multiple things, but couldn't update ddcutil to version 1.3.0

With the other commands, still nothing.

Hier some output:
ddcutil_Debug2.txt

from ddcutil.

You can download a package for ddcutil 1.3.0 from repo Raspian Testing, which avoids having to build it yourself.

The key question is whether whether another monitor, known to work with ddcutil, either in Raspian or a more normal x86 environment, works.

from ddcutil.

Same device, same cable with added of HDMI to DVI Adapter, other monitor (HP E231) it works.
See Output File: (--version / interrogate --verbose / capabilities) DebugE231.txt

My actual monitor has only: HDMI, DP or VGA. (ThinkVision T24d-10)
ddcutil is now on verison 1.3.0

from ddcutil.

And here the Debug with ddcutil 1.3.0 (interrogate --verbose)
DebugT24d.txt

from ddcutil.

Your results so far suggest that the problem is the monitor. If you are able to test your monitor on a desktop system running ddcutil that would confirm it.

For our purposes, HDMI and DVI are interchangable, so using an adapter cable is not a problem. Both DVI and HDMI use the same video signaling protocol (TDMS) on the video pins, and use the same I2C protocol on the I2C related pins. HDMI has some additional lines, such as CEC (Consumer Electronics Control), that don't matter in our context.

from ddcutil.