Matrix effect crashes TD about simplemixer HOT 5 CLOSED

Driver issue then...very odd as I'm running a pretty old driver. I'll close this and see if anyone tries to reopen but we can assume it's drivers for now.

from simplemixer.

Hmm I can't seem to reproduce this but I've not got a 960m machine lying around anywhere. Maybe turn off cooking and delete a few nodes and see which one it is? I might be able to find an alternative layout.

from simplemixer.

It seems that's my system fault.
On clean Win10 system (same PC) SimpleMixer works without the problem.
solved: installing GeForce Drivers (clean install option enabled) helped.

from simplemixer.

So, drivers were not the cause. Project started once, then it began to hang as before.

Here's working solution:
you need to to change registry keys (or add if there is no such) in regedit

quote from Watchout's Win 10 Tweaking Guide

It takes time to change display mode on servers with multiple high-resolution outputs (especially if using a sync card). With Windows default settings, the GPU might timeout and cause a bluescreen. To counter this, increase the timeout values as below.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\TdrDelay

should be increased to 15 seconds (default is 2 seconds, decimal value DWORD)

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\TdrDdiDelay

should be increased to 60 seconds (default is 5 seconds, decimal value DWORD)

from simplemixer.

Ahh yeah I'd always recommend doing the watchout tweaking guide on any machine running a touchdesigner show. All our servers have the tweaks done, even control servers...not that it's required so much in a local VJ set but I keep my machine tweaked anyways.

from simplemixer.