radioactivedecay Goto Github PK

radioactivedecay is a Python package for radioactive decay calculations. It supports decay chains of radionuclides, metastable states and branching decays. By default it uses the decay data from ICRP Publication 107, which contains 1252 radionuclides of 97 elements, and atomic mass data from the Atomic Mass Data Center.

The code solves the radioactive decay differential equations analytically using NumPy and SciPy linear algebra routines. There is also a high numerical precision calculation mode employing SymPy routines. This gives more accurate results for decay chains containing radionuclides with orders of magnitude differences between the half-lives.

This is free-to-use open source software. It was created for engineers, technicians and researchers who work with radioactivity, and for educational use.

• Full Documentation: https://radioactivedecay.github.io/

radioactivedecay requires Python 3.8+. Install radioactivedecay from the Python Package Index using pip:

$ pip install radioactivedecay

or from conda-forge:

$ conda install -c conda-forge radioactivedecay

Either command will attempt to install the dependencies (Matplotlib, NetworkX, NumPy, Pandas, SciPy, Setuptools & SymPy) if they are not already present in the environment.

Create an Inventory of radionuclides and decay it as follows:

>>> import radioactivedecay as rd
>>> Mo99_t0 = rd.Inventory({'Mo-99': 2.0}, 'Bq')
>>> Mo99_t1 = Mo99_t0.decay(20.0, 'h')
>>> Mo99_t1.activities('Bq')
{'Mo-99': 1.6207863893776937, 'Ru-99': 0.0,
 'Tc-99': 9.05304236308454e-09, 'Tc-99m': 1.3719829376710406}

An Inventory of 2.0 Bq of Mo-99 was decayed for 20 hours, producing the radioactive progeny Tc-99m and Tc-99, and the stable nuclide Ru-99.

We supplied 'h' as an argument to decay() to specify the decay time period had units of hours. Supported time units include 'μs', 'ms', 's', 'm', 'h', 'd', 'y' etc. Note seconds ('s') is the default if no unit is supplied to decay().

Use cumulative_decays() to calculate the total number of atoms of each radionuclide that decay over the decay time period:

>>> Mo99_t0.cumulative_decays(20.0, 'h')
{'Mo-99': 129870.3165339939, 'Tc-99m': 71074.31925850797,
'Tc-99': 0.0002724635511147602}

Radionuclides can be specified in four equivalent ways in radioactivedecay: three variations of nuclide strings or by canonical ids. For example, the following are equivalent ways of specifying ²²²Rn and ¹⁹²ⁿIr:

• 'Rn-222', 'Rn222', '222Rn', 862220000,
• 'Ir-192n', 'Ir192n', '192nIr', 771920002.

Inventories can be created by supplying activity ('Bq', 'Ci', 'dpm'...), mass ('g', 'kg'...), mole ('mol', 'kmol'...) units, or numbers of nuclei ('num') to the Inventory() constructor. Use the methods activities(), masses(), moles(), numbers(), activity_fractions(), mass_fractions() and mole_fractions() to obtain the contents of the inventory in different formats:

>>> H3_t0 = rd.Inventory({'H-3': 3.0}, 'g')
>>> H3_t1 = H3_t0.decay(12.32, 'y')
>>> H3_t1.masses('g')
{'H-3': 1.5, 'He-3': 1.4999900734297729}
>>> H3_t1.mass_fractions()
{'H-3': 0.5000016544338455, 'He-3': 0.4999983455661545}

>>> C14_t0 = rd.Inventory({'C-14': 3.2E24}, 'num')
>>> C14_t1 = C14_t0.decay(3000, 'y')
>>> C14_t1.moles('mol')
{'C-14': 3.6894551567795797, 'N-14': 1.6242698581767292}
>>> C14_t1.mole_fractions()
{'C-14': 0.6943255713073281, 'N-14': 0.3056744286926719}

Use the plot() method to graph of the decay of an inventory over time:

>>> Mo99_t0.plot(20, 'd', yunits='Bq')

The graph shows the decay of Mo-99 over 20 days, leading to the ingrowth of Tc-99m and a trace quantity of Tc-99. The activity of Ru-99 is strictly zero as it is the stable nuclide at the end of the decay chain. Graphs are drawn using Matplotlib.

The Nuclide class can be used to fetch decay information for individual radionuclides, e.g. for Rn-222:

>>> nuc = rd.Nuclide('Rn-222')
>>> nuc.half_life('s')
330350.4
>>> nuc.half_life('readable')
'3.8235 d'
>>> nuc.progeny()
['Po-218']
>>> nuc.branching_fractions()
[1.0]
>>> nuc.decay_modes()
['α']
>>> nuc.Z  # proton number
86
>>> nuc.A  # nucleon number
222
>>> nuc.atomic_mass  # atomic mass in g/mol
222.01757601699998

There are similar inventory methods for fetching decay data:

>>> Mo99_t1.half_lives('readable')
{'Mo-99': '65.94 h', 'Ru-99': 'stable', 'Tc-99': '0.2111 My', 'Tc-99m': '6.015 h'}
>>> Mo99_t1.progeny()
{'Mo-99': ['Tc-99m', 'Tc-99'], 'Ru-99': [], 'Tc-99': ['Ru-99'], 'Tc-99m': ['Tc-99', 'Ru-99']}
>>> Mo99_t1.branching_fractions()
{'Mo-99': [0.8773, 0.1227], 'Ru-99': [], 'Tc-99': [1.0], 'Tc-99m': [0.99996, 3.7e-05]}
>>> Mo99_t1.decay_modes()
{'Mo-99': ['β-', 'β-'], 'Ru-99': [], 'Tc-99': ['β-'], 'Tc-99m': ['IT', 'β-']}

The Nuclide class includes a plot() method for drawing decay chain diagrams:

>>> nuc = rd.Nuclide('Mo-99')
>>> nuc.plot()

These diagrams are drawn using NetworkX and Matplotlib.

radioactivedecay includes an InventoryHP class for high numerical precision calculations. This class can give more reliable decay calculation results for chains containing long- and short-lived radionuclides:

>>> U238_t0 = rd.InventoryHP({'U-238': 1.0})
>>> U238_t1 = U238_t0.decay(10.0, 'd')
>>> U238_t1.activities()
{'At-218': 1.4511675857141352e-25,
 'Bi-210': 1.8093327888942224e-26,
 'Bi-214': 7.09819414496093e-22,
 'Hg-206': 1.9873081129046843e-33,
 'Pa-234': 0.00038581180879502017,
 'Pa-234m': 0.24992285949158477,
 'Pb-206': 0.0,
 'Pb-210': 1.0508864357335218e-25,
 'Pb-214': 7.163682655782086e-22,
 'Po-210': 1.171277829871092e-28,
 'Po-214': 7.096704966148592e-22,
 'Po-218': 7.255923469955255e-22,
 'Ra-226': 2.6127168262000313e-21,
 'Rn-218': 1.4511671865210924e-28,
 'Rn-222': 7.266530698712501e-22,
 'Th-230': 8.690585458641225e-16,
 'Th-234': 0.2499481473619856,
 'Tl-206': 2.579902288672889e-32,
 'Tl-210': 1.4897029111914831e-25,
 'U-234': 1.0119788393651999e-08,
 'U-238': 0.9999999999957525}

radioactivedecay calculates an analytical solution to the radioactive decay differential equations using linear algebra operations. It implements the method described in this paper: M Amaku, PR Pascholati & VR Vanin, Comp. Phys. Comm. 181, 21-23 (2010). See the theory docpage for more details.

It uses NumPy and SciPy routines for standard decay calculations (double-precision floating-point operations), and SymPy for arbitrary numerical precision calculations.

By default radioactivedecay uses decay data from ICRP Publication 107 (2008) and atomic mass data from the Atomic Mass Data Center (AMDC - AME2020 and Nubase2020 evaluations).

The datasets repo contains Jupyter Notebooks for creating decay datasets that can be used by radioactivedecay, e.g. ICRP 107.

The comparisons repo contains some checks of radioactivedecay against PyNE and Radiological Toolbox.

From the base directory run:

$ python -m unittest discover

radioactivedecay is open source software released under the MIT License. See LICENSE file for details.

The default decay data used by radioactivedecay (ICRP-107) is copyright 2008 A. Endo and K.F. Eckerman and distributed under a separate license. The default atomic mass data is from AMDC (license).

If you find this package useful for your research, please consider citing the paper on radioactivedecay published in the Journal of Open Source Software:

Alex Malins & Thom Lemoine, radioactivedecay: A Python package for radioactive decay calculations. Journal of Open Source Software, 7 (71), 3318 (2022). DOI: 10.21105/joss.03318.

Contributors are welcome to fix bugs, add new features or make feature requests. Please open an Issue, Pull Request or new Discussions thread at GitHub repository.

Please read the contribution guidelines.