Working great, but high CPU utliization about dualshock4-emulator HOT 14 CLOSED

It seems completely fixed in the latest version, now the gyroscope does not load the system. It would be great if tested the latest version.

from dualshock4-emulator.

AMD 4500u.
where is the sleep timeout setting? in the config.ini.
are there any side affect of changing it to 2-3 seconds.
BTW, this is first solution for this that works for me, so thank you so much

from dualshock4-emulator.

FYI, i shared this github in the Ayaneo discord channel

from dualshock4-emulator.

i just very thankful that you took the time to write this. now PSNow and RemotePlay work on the Ayaneo. thank you! i am happy to test future releases

from dualshock4-emulator.

Worked thx!

from dualshock4-emulator.

What processor do you using? You can increase the sleeptimeout up to 2-3 seconds and the load will be lower.

from dualshock4-emulator.

[Xbox]
...
SleepTimeOut=1
...

[KeyboardMouse]
...
SleepTimeOut=1

input latency will increase, but not significantly.

from dualshock4-emulator.

Will it help?

from dualshock4-emulator.

not much. I increased the timeout on the keyboard/mouse quite a bit since i have no physical keyboard or mouse attached. only a gamepad. the power usage only dropped from about 7w to 4-5w, so it is consuming tons of battery power, CPU only dropped from 33% to 28%.

from dualshock4-emulator.

could part of the issue be that i have no mouse and only the onscreen keyboard?

from dualshock4-emulator.

So it looks like it has something to do with reading the gyroscope, now this can be disabled in the config file
[Motion]
Activate=0

from dualshock4-emulator.

that fixed it!! thanks!

i wonder if it is because i am using this device ,https://store.ayaneo.com/products/ayaneo-2021 and it uses the Bosch BMI160 gyro sensor instead

from dualshock4-emulator.

thanks!!!

from dualshock4-emulator.

It looks like it's my fault

from dualshock4-emulator.