Comments (10)
OSRM is the performance monster out there. Sounds more like you have smth mis-configured.
Best to share a lot more details, e.g. platform, commands to run OSRM, graph extent, endpoint (route/table?), what's the approx average distance between locations etc.?
12 mins could be the case for 200 thousand locations. "The application" (assuming you're not talking about docker but osrm-*) has no hard-coded memory limit. It loads whatever the graph size statically and dynamically whatever is needed to do the expansion (quite low). So the 8GB is probably the graph. But again, impossible to guess what's going on without more details.
from osrm-backend.
@nilsnolde There are several different regions of Brazil, some points can be more than 2000 kilometers between them. I executed the same commands as in the documentation to run using cmake, and made the request for standard port 5000 via GET passing the coordinates
Below is an example object before assembling the request to be more specific, but when I assemble a request with more than 200 points I am having this problem with the slowness of routing.
{
"latitude": -26.0922364,
"longitude": -51.6166878,
"region": 0,
},
{
"latitude": -28.9216045,
"longitude": -50.1799525,
"region": 0,
},
{
"latitude": -24.4931997,
"longitude": -46.9945173,
"region": 0,
},
{
"latitude": -26.9195567,
"longitude": -48.0988025,
"region": 0,
},
from osrm-backend.
/route or /table? not super familiar with osrm, but a many:many table shouldn't have a problem with that. a route with > 200 waypoints, where lots of them have multiple thousand km apart is a different story as that happens sequentially. still, 12 mins even valhalla would beat in that scenario very likely, so smth strange is going on there.
are you saying that up to 200 waypoints it's quick and above that performance suddenly breaks down?
also what's that "region"? are you splitting osm data? i.e. you're not building entire brazil but island-ish regions of it in a single graph? are you sure connectivity/topology is properly preserved?
from osrm-backend.
@nilsnolde
Route
As a rule, no, as more points are added, it grows exponentially, I used it from 200 points onwards, as that's when it starts to get really bad for the user. 35 waypoints take approximately 15 seconds, 90 waypoints take just over a minute, 150 waypoints take approximately 4 minutes, and 200 waypoints take approximately 12 minutes.
Regarding the region, I don't go to OSMR, I've already downloaded the complete Brazil map, so there's no need to divide and group again.
I put it to route 350 points, and it doesn't exceed 8GB, even so it's taking a long time.
from osrm-backend.
the last thing that comes to my mind is possibly that it's using excessive swapping for some reason. anything else running on that machine? 12 gb should be plenty for brazil which has 1.6 gb PBF.
what's the output of grep '^Swap' /proc/meminfo
? if there's smth in there, then: when you start the osrm executable, look up its PID (process ID) and then monitor what it's using on swap file while processing one of those big requests with grep VmSwap /proc/<PID>/status
.
from osrm-backend.
if there's no clue there, I give up:) but there's many others here with tons of more experience/knowledge on osrm.
from osrm-backend.
I listed the commands while it is doing the routing
root@srv-OSRM:~# grep '^Swap' /proc/meminfo
SwapCached: 0 kB
SwapTotal: 4096000 kB
SwapFree: 4096000 kB
root@srv-OSRM:~# grep VmSwap /proc/359/status
VmSwap: 0 kB
No problem, it's something I'm starting to tinker with now too
from osrm-backend.
@optrack2 Can you supply an example URL that someone can use to try to reproduce the issue?
from osrm-backend.
@danpat
I'm looping for each group of points.
http://192.168.1.197:5000/route/v1/driving/-48.0643025,-24.9125567;-43.0426162,-22.6604221?overview=full&alternatives=false&steps=false&geometries=polyline&annotations=false
I'm using Ubuntu 22.04, if I change to FreeBSD it may upgrade performance?
from osrm-backend.
@optrack2 If you does not need all the route details at this computation step. Just use the table API en point, aka matrix. It is matter of seconds, or less.
https://github.com/Project-OSRM/osrm-backend/blob/master/docs/http.md#table-service
from osrm-backend.
Related Issues (20)
- Fragmented route generation on osrm-routed
- NodeJS binding start error on Windows HOT 3
- when building from source on mac m1,Undefined symbols for architecture arm64 HOT 3
- Parameter for Polygon-Based Area Avoidance in OSRM table Method HOT 1
- Can't build shared libraries on macOS
- Docker with alpine (once again) HOT 2
- Audible fences should not be barriers HOT 1
- Building osrm-backend on Ubuntu 24.04 "Noble Numbat" from source fails HOT 7
- maxspeed on road can lead to OSRM exceeding configured vehicle maxspeeds HOT 1
- Wrong results with nearest service HOT 2
- GPX files #question HOT 6
- How to create OSRM traffic update file(csv) with gps trace data ?
- Add support for maxaxleload
- cmake fails on osrm-backend/third_party/sol2/include/sol/sol.hpp HOT 1
- Incorrect snapping. HOT 7
- Avoiding barrerier, foot, yes HOT 2
- Assistance with Integrating Traffic Data into OSRM
- Error in compile from source code
- Having build issues when trying to build from source
- Json_render is not accurate for osm node ID HOT 6
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from osrm-backend.