toggle_fill doesn't seem to work about gridfinity-freecad HOT 2 OPEN

Hi! Thanks for the bug report. I looked at it, and it's a logic problem in some of the calculations for a whole bunch of different values. Setting z-units to 1 means that the walls, the fill, and the scoop features now have a height of 0, which results in them breaking.

I will think of a way to fix it, but I have a medical procedure tomorrow and won't be able to work on this before the weekend at the earliest.

Here's a quick fix for now. Set the following parameters

• X = 2
• Y = 1
• Z = [anything other than 1 or 0]
• toggle_efficientfloor = 0

Then DELETE the following features from the feature tree:

• Bin_wall
• Stacking_lip
• Scoop
• Handle
• bin_fill

This should result in a 7mm high pad with a baseplate-matching bottom feature and a flat top. You should still be able to toggle screws and magnet holes from the spreadsheet.

from gridfinity-freecad.

Thanks for the fast answer.
I'll try your workaround.
Stay safe with your medical procedure.

from gridfinity-freecad.